The Decocontain 3000 is a containerbased, multi-purpose and highly mobile decontamination system featuring all the major components required for a complete decontamination centre. All the steps needed for the thorough decontamination of people, personal equipment, vehicles and sections of road can be performed with this unit. The Decocontain 3000 is ready to use in less than 30 minutes, and in one hour it can decontaminate up to 160 persons, 8 to 12 vehicles and 20 to 30 sets of equipment. All the necessary modules and components are integrated in the 20’ decontamination system in an ideal way. The system features a central electricity generator to supply all modules and components. Thanks to its integrated water tank, the system can temporarily be operated without an external water supply. The Decocontain 3000 is compatible with a range of different carrier vehicles.

The MPDS 2 is a diesel driven multipurpose unit for a great variety of decontamination jobs. It can be used with up to three lances at the same time, enabling pre-treatment, main treatment and post-treatment to be performed simultaneously with a single unit. With a capacity of up to 930 litres an hour and a pressure of up to 120 bar, the modular, diesel driven MPDS 2 is a multi-purpose unit for cleaning and decontamination. As well as cold water, it can also produce hot water up to 60 °C and superheated steam up to 150 °C. The standard unit features a simultaneous, dual-lance mode for diverse cleaning and decontamination. Integrated two-component dosing units allow it to use a wide range of commercial agents on various materials. An optional three-lance setup enables simultaneous pre-, main-, and post-treatment with virtually any commercial agent (additional power source needed).

The CSE container is the state-of-the-art solution for thorough decontaminating sensitive optical and electronic equipment. This mobile 10-foot container features two advanced 260-liter vacuum chambers that deliver a safe, automated process without harming delicate components. Its intelligent dual-door design prevents cross-contamination by strictly separating "dirty" and "clean" zones. The container achieves complete operational independence with its onboard power generator and consumables, enabling it to run for at least one hour without external support.

The SN 50 Decon is a petrol-powered thermo aerosol generator that applies active agents for the decontamination, disinsectisation and disinfection of interior spaces and surfaces. Due to its low weight and easy operation, the unit can be deployed by a single person. The device works with various aqueous solutions and can be used to decontaminate, disinsect and disinfect interior spaces and surfaces following decontamination with hazardous biological or chemical substances. The device can spray up to 30 metres and runs on petrol. Thanks to the integrated combustion chamber, with a full tank the SN 50 Decon can be operated completely independently for approximately 30 minutes.

The MDS-10 dual sensor detector provides unrivalled metal detection and ground-penetrating radar performance in an ultracompact, lightweight platform. The MDS-10 combines cutting-edge simultaneous multi-frequency digital metal detection technology and proven ultra-wideband impulse ground-penetrating radar to detect metal and non-metal targets. The MDS-10 is the preferred detector for military personnel tasked with finding the most challenging metal and non-metal IED components in areas with high metal contamination.

The MDS-10's intuitive and simple-to-operate user interface coupled with its detection performance makes the MDS-10 the most capable Counter-IED detector available.

• Superior Metal & Non-Metal IED Component Detection
• Excellent Landmine and Unexploded Ordnance Detection
• Real-Time GPR Target Visualization
• Night-Vision Goggle Compatible
• Smallest and Lightest Dual Sensor Detector
• Waterproof (IP68)

The F3 and F3 UXO detectors detect all metal and minimum metal mines at full sensitivity regardless of the mineralized content of the soil. These detectors utilize industry-leading pulse induction bi-polar multi-period sensing and ground balance technologies. These technologies allow operators to not only achieve the highest metal detection sensitivity but also to eliminate false alarms caused by mineralized soil. The F3 and F3 UXO detectors are specially designed to meet the requirements of humanitarian demining and military mine clearance professionals.

The F3 and F3 UXO detectors' superior performance, simplicity, and safeguards made them one of the most widely used metal detectors in the world.

• Industry Leading Landmine & Unexploded Ordinance Detection
• Maximum Metal Detection Depth
• Exceptional Performance in Highly Mineralized Soils
• Simple, Intuitive Operation
• Designed to Prevent Operator Error
• Highly Rugged

The Adaptos Electric Breech can be used to fire the TiTAN either on remotely operated vehicles or as a standalone. The rugged design of the breech has been field-tested by veteran EOD techs for reliability in all conditions on land or in water.
Rated to a depth of 60 feet saltwater. This capability allows the TiTAN to be utilized in a maritime environment for unforeseen threats.

The electric breech is designed with a mechanical safety on the back that is 100% effective in mechanically blocking the firing pin from moving. This ensures the safety of operators during the handling of loaded TiTANs.

The EOD 10E is a highly protective and capable system that has been adopted by Bomb Technicians across the United States.

It has been 'Certified' to the Bomb Suit NIJ Standard 0117.01 and offers the following:

• More ergonomic design to reduce weight and increase mobility and flexibility• Completely new EOD helmet to increase protection and improve fit
• Integrated voice command system to keep the user's hands free to carry or deploy tools• Extensive V50 testing against fragments of 17-gr, 44-gr and 207-gr
• Mission-specific lighting
• Enhanced ventilation to mitigate heat stress and keep the user feeling refreshed
• Improved foot protection for a closer fit and natural walking motion
• Shielded electronics for compatibility with Electronic Countermeasures (ECM) when dealing with a Radio Controlled IED (RCIED)
• Enhanced situational awareness, including static and dynamic fields of view
• OPTIONS include: Breathing Apparatus visor, cooling systems, communication systems, video camcorder, steel visor, hand protector.

The RapidHIT ID Case is a ruggedized, reusable transport case that delivers comprehensive protection and operational flexibility for the RapidHIT ID System in field environments. The case allows users to transform any location into a mobile forensic laboratory, maintaining full RapidDNA capabilities, regardless of location.

The RapidHIT ID Case can be used to store the following components:

• RapidHIT ID Instrument
• RapidHIT ID Instrument power cord
• Drip tray
• Laptop computer (up to 15 inches)
• Laptop power cord
• Ethernet cord (up to 6 feet)
• Barcode scanner

Engineered to meet ISTA 3B standards, this case ensures uncompromising protection against the shocks and vibrations encountered during standard vehicle transport and commercial freight shipping*. Weather-resistant seals provide a barrier against moisture, dust, and other environmental contaminants, ensuring instrument protection during transportation and extended storage periods.

Features of the RapidHIT ID Case include:

• Retractable handle
• ID plate
• Front label indicators
• 'This side up' labelling
• Stainless steel carrying handles
• Stainless steel latches
• Airtight certified breather valve
• Injection molded edge casters
• Foam plugs

Beyond transportation, the case can convert into a fully integrated workstation upon arrival at your destination. This allows for efficient deployment in space-constrained environments without sacrificing functionality. The integrated design streamlines setup procedures, reduces deployment time, and ensures consistent performance regardless of location – making it an essential component for mobile operation where reliability and efficiency are critical.

For additional recommendations on best practices for use of your RapidHIT ID System in a mobile environment, please refer to the below. For specific instruction on use of the case, refer to the associated below.

*For freight shipping, it is recommended to secure the case to a pallet.

M9 Chemical Detection Paper is actually a coated tape with a mylar-adhesive backing so it can be afixed to objects. It is packaged in a dispenser with a serrated edge to easily tear off sections for use. M9 Paper is available in a single roll or by the case. There are 50 rolls in each case..

In 2012, the State of California's FIRESCOPE Standardized Equipment List, listed the M9 as a required item for emergency and Hazmat first responders.

Storage (Type S)This is the basic style MLAMS used for general storage. Door options include standard personnel and vehicle door styles
SKU: C23052X63GG-T
Dimensions : 52'W x 63'L, 16' Eaves
End Configuration: Gable (flat), both ends

Features:

• Tan 686A (color #33446) or camouflage green 483 fabric color options
• Pre-Engineered Aluminum frame support system
• Fully relocatable and ground deployable
• Pre-assembled hardware minimizing on-site assembly
• Integrated keder tracks for simple fabric attachment
• Modular design allows for expandability

Specifications:

• Engineered to 90 mph wind load (up to 115 mph avail)
• Engineered 8 psf of snow for up to 12 hours (up to 20 psf avail)
• Rain load of 4" per hour with 40 mph winds
• Water-resistant, flame-retardant fabric (MIL-PRF-32504)
• Berry Amendment Compliant

LAMSCompliant with MIL-PRF-32504B (MLAMS) (Aug. 2016). End configurations include a retractable Tri-lid Eyelid Door, allowing for full-width entries when in the open state and protection from environmental elements when in the closed state, and gable end wall with sliding fabric door. This shelter also includes vehicle and personnel side doors, allowing for easy access. Celina's LAMS are designed for various uses, including maintenance space, general purpose, general storage, training space, and aircraft hangers. This expeditionary shelter design is completely mobile and relocatable, and can be deployed on any ground type. Pre-assembled hardware allows for quick shelter installation. Celina's Large Area Maintenance Shelters are Berry Compliant.
SKU: C23075X122TG-T
Dimensions : 75'W x 122'L, 16' Eaves
End Configuration: Tri-Lid end, Gable (flat) end

Features:

• Tan 686A (color #33446) or camouflage green 483 fabric color options
• Pre-Engineered Aluminum frame support system
• Fully relocatable and ground deployable
• Pre-assembled hardware minimizing on-site assembly
• Integrated keder tracks for simple fabric attachment
• Modular design allows for expandability

Specifications:

• Engineered to 90 mph wind load (up to 115 mph avail)
• Engineered 8 psf of snow for up to 12 hours (up to 20 psf avail)
• Rain load of 4" per hour with 40 mph winds
• Water-resistant, flame-retardant fabric (MIL-PRF-32504)
• Berry Amendment Compliant

The DCG Series Tactical Power Solutions are rugged, mission ready diesel portable generators delivering reliable power in austere environments. Available in 3.5 kW and 5.0 kW models, the DCG family features a compact, shared footprint and common components to simplify logistics, maintenance, and field service. Powered by premium air cooled engines, these generators support Diesel D1/D2, Jet A, JP 8, and F 24 fuels, ensuring global operability. An integrated 5 gallon fuel tank provides long runtimes, while pushbutton electric start with recoil backup and a glow plug cold start system enable dependable operation down to –25°F (–30°C). With 120/240V single phase output, NATO compatible 24V starting, USB charging, and durable construction, the DCG Series delivers flexible, high reliability power for tactical and expeditionary missions.

Filtration and Remineralization System (FILMIL) is designed to draw from fresh water, brackish, or seawater sources, ensuring high purification rates for both drinking and construction water. It reintegrates essential minerals like calcium and magnesium to RO purified water to repurpose as drinking water. The onboard storage can hold a maximum of 300 gallons for drinking, and 400 for washdown purpose. The addition of 3K fabric holding tanks can be added to the system to support higher consumption and can be filled at a rate of 7000 gallons per day. Efficient power usage across all components ensures high output performance, delivering reliable water at a rate of 56 GPM at 70psi. The system operates in extreme temperatures ranging from -40°f to 120°f. It includes convenient onboard dispensers, multiple input and output ports, and an adapter hose kit with reducers.

The Waterhorse is an easily relocatable storage shelter designed for potable water supply. It features a seamless high-density polyethylene molded tank with a 4" fill port and a 2" dispense port. Includes comprehensive anti-freeze protection through insulation, immersion heaters, and heat trace. An electric panel and temperature monitoring system are mounted internally behind cargo doors. The system is equipped with 16" duct ports for interfacing with the IASH and electrical and hose interfaces. Flood lights are mounted on the container to enhance visibility. Additionally, the system includes a filter housing for M98 CBRN protection and is ABS certified. The system measures 20'L x 8'W x 8.5'H, weighs 6950 lbs.

• CSC certified for 9-high stackability
• Twin 5000W in-tank immersion heaters and electrical heat tracing for all external plumbing
• Single 60A, 208V, 3-phase setup
• Water capacity of 3000 gallons
• Transportability via land, rail, or sea
• Easily moved using a multi-directional four-way forklift

The Expeditionary Field Sanitation Center (FSC-TRICON) is a containerized, mission-ready solution designed to support dishwashing and sanitation operations for up to 150 personnel in deployed environments. Housed in an expandable, ISO-compliant Tricon container constructed of durable Corten steel, the FSC provides a rugged and transportable sanitation capability across land, rail, sea, and air. The system features three diesel-fueled sinks with thermostatic controls for consistent temperature-regulated cleaning, along with integrated grease separation and wastewater storage for efficient waste management. Three drying racks and two drain tables streamline dish handling and throughput. Dual Environmental Control Units provide heating and cooling-one per wingwall-ensuring reliable operation in diverse climates. Designed for rapid deployment, the FSC can be set up by two trained personnel and offers Berry-compliant fabrication, stackable shipping certification, and a compact footprint that expands to maximize interior workspace.

The Expeditionary TRICON Self-Service Laundry System is a deployable, containerized solution designed to provide reliable laundry services for up to 150 personnel in expeditionary and austere environments. Housed in an expandable, ISO-compliant Tricon container constructed of durable Corten steel, the system is certified for transport by land, rail, sea, or air and supports rapid deployment by trained crews. The laundry shelter is equipped with four high-efficiency, front-loading washing machines and four light commercial dryers, delivering effective, self-service operation with minimal oversight. Integrated fresh and grey water storage, an on-board waste and supply pump, and included hoses and power cables support sustained operations. A 500 BTU Environmental Control Unit provides heating and cooling for operator comfort, while wingwall support jacks maximize interior workspace when deployed. The system offers a compact stowed footprint that expands to enhance operational capacity in the field.

The ClearSteth hosted software solution shares quality heart, lung, and bowel sounds for evidence-based clinical decision making.

With a simple, intuitive interface, it safely shares data through encrypted connections - protecting information while making it easy to connect to remote clinicians.

Available as a standalone application or as an integrated application in eNcounter®.

Lightweight and highly versatile, the ClinicalAccessPro can be configured with integrated medical devices at the point of care, improving workflows and documentation.

The station's adjustable height, lockable holder, and articulating arm make it easy to maneuver to accommodate patient needs.

Strengthen family bonds by learning to consistently pay positive attention to one another.

Our app guides your family members through thoughtful questions about yourselves and each other, sparking enlightening conversations.

By sharing answers, you'll unlock fun bonus activities designed to encourage meaningful interactions, fostering a cycle of reciprocal emotional boosts.

The SmartDrone is a fuel-powered, helicopter platform built for long-endurance aerial missions, payload flexibility, and autonomous field operations. Rather than behaving like a typical quadcopter, it operates like a small helicopter. That is the source of its two biggest advantages: endurance and the ability to carry real mission payloads. Stable hovering, vertical takeoff and landing in tight spaces, and on-board IvedaAI analytics keep operators focused on the mission, not the aircraft.

The WallDoc transforms any clinical space into a high-functioning telehealth hub. Designed for clinical and behavioral health operations, this sleek, wall-mounted kiosk delivers secure, seamless patient interactions while maximizing space efficiency.

Ideal for both self-service and facilitated visits, WallDoc keeps medical devices organized and patient data protected, all within a modern, professional design.

M1986 Series AC-DC Power Supplies Single Phase, AC/DC Power Supply, single-phase input (50/60/400Hz), meets commercial safety standards (IEC 63268-1) and military standards MIL-STD-1399-300, MIL-STD-461, MIL-STD-810. High power factor, single DC output

Ultra-Compact, Rugged, Multi protocol converter supporting Ethernet to Serial/IO, USB to Serial and USB to Ethernet conversions