Toll-Free: 866.936.3890
Filters
$0.00
- Freezer Grade Gasket, 2' Polyurethane Insulation
- Dual Handle System (Molded-in & Hinged Handles)
- Press & Pull Latches (Wide for Gloved Use)
- Molded-In Tie Downs
- Non-Skid & Non-Marking Raised Feet
- Molded-In Lock Hasp, Stainless Steel Plate
- Sloped Drain & Tethered Threaded Plug (Garden Hose Attachable)
- Corrosion Resistant Stainless Steel Hardware
- Integrated Fish Scale on Lid
- Guaranteed for Life
- Assembled in the USA with US and foreign components
- Please Note: Ice retention - Initial test results are based on the Pelican 65Qt Elite Cooler model. Testing was conducted using forced air circulation in a temperature controlled environmental chamber at 90 degrees F. The test specimens were loaded to capacity with commercial cubed ice. Performance will vary by model size and external user conditions, such as; (sun exposure, wind, ice type, frequency of opening, etc).
$0.00
Using fiberglass in a thermoset resin gives the Patriot series a high strength to weight ratio. Thermoset resins, as opposed to thermoplastic resins, do not soften with higher temperatures. Patriot series cases are available in many configurations and in virtually any size with little to no tooling costs.
$0.00
Glide-out shelves are ideal for the storage of larger items that are not suitable for small or medium inserts. Three types of shelves are available: Standard Single Entry Shelves (nominal
70% extension); Single Entry Shelves at (100% extension); and Double Entry Shelves. Shelves can be supplied with containment trays for battery storage, tie-down slots for retention nets or special purpose attachments and hard points.
- Shelf capacity of 2,250 lbs and 4,500 lbs U.D.L.
- Standard single entry shelf (nominal 70%
- extension at full load)
- Double entry shelf (nominal 70% extension at full load - only available in SpaceFrame)
- Retention netting or ratchet straps supplied
- as requested
- Single entry 100% extension shelf
- Available in bulk or battery shelves
- Battery shelves supplied with non-corrosive
- containment tray
$0.00
- Round shanks.
- Tri-lobed handle made from bi-material, helps prevent hand from slipping.
- Precision tips for precise fastener fit.
- Alloy steel shanks heat treated for strength.
$0.00
Cubic inch capacity is 15,014. Made of 14, 16 & 18 gauge steel. Maximum weight capacity for each drawer is 125 lbs. Standard red powder coat paint finish. Also available in black, blue and yellow, made to order. Contact customer service for availability. Heavy duty locks with tubular key. Recessed aluminum extruded drawer pulls. 100% full extension drawers. Drawer liners included. 6' x 2' Phenolic casters - 700 lbs./Caster.
$0.00
Includes all the tools from Snap-on's most complete cordless line
- Portable, deployable, easy to ship and lift
- Organized in tool control foam
- This powerful cordless kit includes:
- Drill Driver (CDR6850B)
- Impact Wrench (CT6850DB)
- Reciprocating Saw (CTRS6850DB)
- Grease Gun (CGG4850DB)
- Two (2) Ni-Cad Batteries (CTB4187)
- Battery Charger (CTC620)
- Work Light (CTLED4918HO)
- Case (PCD1610NFBLK)
- Foam Insert (IKCFM0000226)
$0.00
The DCR015 12V/20V MAX* Worksite Charger Radio has many great features to optimize the user's productivity such as the ability to charge and run off of 12V and 20V MAX battery packs. Also features two AC power outlets for more versatility for jobsite power. Auxiliary and USB Ports allows for connection to CD, MP3, Portable Satellite Receivers, and other digital audio devices are included.
FEATURES:
FEATURES:
- 2 amp charger for 12V Max and 20V Max DEWALT® battery packs allow for quick and convenient battery charging
- Runs off 12V Max and 20V Max DEWALT® batteries making it a cordless radio capable of running off rechargeable and reusable battery power
- 2 AC power outlets offer more versatility for job-site power
- Auxiliary and USB ports allow for connection to CD, MP3, Portable Satellite Receivers, and other digital audio devices
- USB port allows device to be charged via USB when radio is plugged into a wall outlet
- Device storage box protects electronic devices from job-site debris while plugged into Aux or USB ports
- Class D amplifier, woofers, and tweeters provide full range of high and low sound for optimum sound quality
$0.00
Husqvarna 562 XP® is developed for professional loggers and skilled landowners. The saw has a ground breaking design and is loaded with innovative solutions for efficient, convenient operation with large air filter and bar options up to 24". Our unique X-Torq® engine technology provide more power where you need it, up to 20% less fuel consumption and 60% less exhaust emission. RevBoost™ provides instant high chain speed for extra efficient de-limbing.
- X-Torq®: Delivers lower fuel consumption and reduced exhaust emission levels in accordance with the world's most stringent environmental regulations.
- Auto Tune gives optimal engine performance throughout automatic engine setting. No time spent on carburetor adjustments. It compensates for different fuels, altitude, humidity, temperature and clogged air filter.
- Air Injection: Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
- LowVib®: System designed to reduce vibration levels to the operator, which lessens fatigue.
- Adjustable oil pump: Allows you to control oil flow depending on application and weather conditions.
- Quick-release air filter: Facilitates cleaning and replacement of the air filter.
- RevBoost™: Rapid acceleration and higher chain speed for best limbing performance.
- Combined choke/stop control
- Allows for easier starting and reduces the risk of engine flooding.
$0.00
The perfect tool for contractors who have to adjust windows doors and other openings. It's also a good tool for heavy-user and precast applications. Cuts openings for alteration, renovation and new construction work. It also cuts pipe in installation applications.
- Designed for wet cutting only.
- The K 970 Ring power cutter is just as flexible, versatile and mobile as a standard gasoline driven power cutter.
- New generation Active Air Filtration™ efficiently cleans air. Filter inspection required only with normal maintenance until filter needs to be replaced.
- Cutting depth of 10', twice the depth of a traditional power cutter.
- Engine with X-Torq® produces more power, higher torque and greatly reduced emissions.
- Easy to start, due to the decompression valve.
- SmartCarb™, a built-in automatic filter compensation, maintains high power and lowers fuel consumption.
- DuraStarter™, a dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and service life.
- The Poly V-belt provides better power transmission, less retensioning and increased product life.
- Efficient vibration and sound dampening make the machine more convenient to use.
$0.00
- BladeArmor™ coating on the first 6' maximizes durability of the blade
- High-visibility Mylar® polyester film extends life of entire blade and provides visibility in low lighting
- Chrome case with durable rubber-holds up to heavy use
- AirLock™ rubber slide lock is resistant to impact and makes locking and unlocking easy
- 16' and 19.2' stud center markings simplify framing jobs
- Cushion grip provides comfortable, slip-resistant hold
- Three-rivet, corrosion-resistant Tru-zero end hook for accurate measurements
$0.00
OPS.DIRT's rapidly deployable soil stabilization products are used for a variety of critical military and expeditionary construction applications including dust and erosion control, as well as the stabilization of runways, taxiways, aprons, helipads, haul roads, security road, parking lots, shelter flooring, hardstands and more. Unlike many of its competitors, OPS.DIRT manufactures its products to the highest standards, meeting the expectations of the greatest military in the world. OPS.DIRT uses virgin, prime ingredients, that are compatible with even the most stringent environmental standards. This ensures quality and a consistent result, every time, without fail, no matter where in the world it may be needed.
Product features include:- Rapidly Deployable
- Easily Installed
- Environmentally-Friendly
- Remote Accessibility
- 2-25x Increase in Load Bearing Capacity
- Eliminates FOD & Brown Out Conditions
$0.00
Securely transports compact firearms and magazines. Available in multiple configurations; contact ADS today for more information.
- Compact Pistol Size Options:
- 11.64 x 8.34 x 3.78'
- 10.54 x 6.04 x 3.16'
- M9 Pistol Size Options:
- 11.80' x 9.80' x 4.70'
- 9.50' x 7.50' x 4.25'
- 16.20' x 12.70' x 6.60'
- 15.00' x 10.50' x 6.00'
- 31.30' x 20.40' x 12.20'
- 29.00' x 18.00' x 10.50'
- Color Options: Black, OD Green, Desert Tan.
$0.00
The OSCR-6 is an automated suppressor cleaner that removes 90-95% of fouling build-up, easily and effectively cleaning even the most complex baffle structures.
FEATURES:
FEATURES:
- Clean up to 6 suppressors in as little as 2 hours
- Easy to use digital interface
- Keep suppressors in service longer
- Customizable temperature and run times
- Safe for use on anodized aluminum, stainless steel, Inconel, titanium and mil-spec finishes
$0.00
The Aimpoint® CompM4s is the latest version of the U.S. Army's M68 CCO, continuing a legacy that Aimpoint® has maintained since 1997.
The CompM4s features enhanced ACET technology that provides up to 8 years of continuous use from a single AA size battery. The CompM4s incorporates an integrated mount that eliminates the need for a separate ring and can be customized with vertical and forward spacers to fit a variety of weapon systems. The sight is shipped complete with a QRP2 mount and standard AR-15 spacer. It is also equipped with a killFlash® anti-reflection device and MILSPEC rubber lens covers. The CompM4s is compatible with every generation of night vision devices and features 7 night vision compatible settings and 9 daylight settings. The sight has a 2 MOA dot for accuracy at all ranges and unequalled light transmission for enhanced low light operation.
FEATURES:
The CompM4s features enhanced ACET technology that provides up to 8 years of continuous use from a single AA size battery. The CompM4s incorporates an integrated mount that eliminates the need for a separate ring and can be customized with vertical and forward spacers to fit a variety of weapon systems. The sight is shipped complete with a QRP2 mount and standard AR-15 spacer. It is also equipped with a killFlash® anti-reflection device and MILSPEC rubber lens covers. The CompM4s is compatible with every generation of night vision devices and features 7 night vision compatible settings and 9 daylight settings. The sight has a 2 MOA dot for accuracy at all ranges and unequalled light transmission for enhanced low light operation.
FEATURES:
- 2 MOA dot size
- 80,000 hours (over 8 years) of constant operation
- 7 night vision compatible settings and 9 daylight settings
- Weight 9.4 oz / 268 g (sight only)
- Submersible to 150 feet (45 meters)
- Low battery compartment
- INCLUDES: QRP2 Mount & Spacer, Rubber Bikini lens cover, Anti-reflection device, AA battery, Allen key2 MOA dot size 80,000 hours (over 8 years) of constant operation 7 night vision compatible settings and 9 daylight settings Weight 9.4 oz / 268 g (sight only) Submersible to 150 feet (45 meters) Low battery compartment INCLUDES: QRP2 Mount & Spacer, Rubber Bikini lens cover, Anti-reflection device, AA battery, Allen key
$0.00
The "High-End & Low-Cost" BinoX 4T Thermal Imaging Binocular system is equipped with Internal RecordingCapabilities (video or pictures), Internal Battery (upto 16-hours per charge / Battery Packs also available),built-in Laser Rangefinder, with "9' different ColorModes and Mil Dot Reticles. This "Smart-HD" ThermalImaging Binocular unit delivers superb image qualityand is built with the newest technology available at anextremely low cost for government end-users. TheBinoX 4T's are available in 19mm, 25mm or 50mmlens sizes.
$0.00
The RAP™ (Ruggedized Accessory Platform) provides four inches of Mil. Std. 1913 rail space above your riflescope for the mounting of lasers, illumination tools and other accessories. Replacing the top half of Nightforce four- and six-screw X-Treme Duty™ rings, the RAP will withstand heavy recoil and still maintain zero even with delicate accessories or sensors.
$0.00
The ColdAvenger® Snow Hunter Balaclava is the warmest, most versatile cold weather mask available. We combine our patented ventilator with a unique two piece balaclava design to provide the perfect level of protection during any wintertime adventure. The unique two-piece design allows for easy removal of the ventilator without having to remove the full balaclava or other headwear. ColdAvenger's patented ventilator technology is a 'game changer' for cold weather operations survival by offering the following functions:
- 'Micro-Climate' Comfortably Protects Airways
- Unrestricted Breathing
- Supports Core Body Temperature
- Thermal Protection from Elements
- Prevents Fogging of Goggles
- Made in the USA, Berry Compliant
$0.00
The Raid Eyewear, made in a matte black Grilamid™ TR-90 nylon half frame shield design, offers superior durability. The 3 lenses offer various strengths of light transmission (15%, 53%, 89%), are distortion free.
FEATURES:
FEATURES:
- Distortion-free lenses provide 100% UVA and UVB protection and are scratch, crack, and craze-resistant
- Exceeds ANSI Z87.1-2003 and EN 166 (F) High Velocity Impact Safety and Optical Standards
- Half frame shield design includes three lenses: Smoke, Clear, and Ballistic Orange
- Adjustable soft TPR nose piece and temple inserts keep eyewear in place
$0.00
5.11's gauntlet length, Tac NFOE2 Flight Glove, features a seamless goatskin palm & knuckle reinforcement for durability and comfort. This glove is GSA compliant and provides protection from flash hazards in tactical environments.
FEATURES:
FEATURES:
- Multiple Colors
- Gauntlet length provides extended protection from flash hazards in tactical environments
- Reinforced knuckles protect against abrasion and extend the life of the glove
- Seamless goatskin palm construction provides better grip and tactility and eliminates irritation from seams
- Patented Tactical Touch? precision fit fingertips for maximum dexterity and comfort
- Secure gathered wrist and Velcro closure on extended cuff keep gloves in place, protect hands from debris, and can be worn under or over the cuff
- Goatskin pull tab for durability
- GSA compliant
$0.00
The Freedom Flex Long Sleeve Shirt from 5.11 Tactical® utilizes an innovative new woven design that offers superior indoor and outdoor comfort in a broad range of job environments. Featuring a unique perforated fabric under the arms, at the sides, and across the back, the Freedom Flex provides dramatic increases to both breathability and freedom of movement. Extra wide pen pockets on each sleeve and dual chest patch pockets offer plenty of storage space, and lightweight construction helps keep you cool and comfortable all day long.
FEATURES:
FEATURES:
- Built from lightweight 3.9 oz. polyester stretch fabric
- Perforations at underarms, sleeves, and back
- Bartacking at major stress points
- Snap closure at collar
- Color: Black, Bosun, Sage Green
- Size: Small - XX-Large
$0.00
The Expert CYPRES 2 is a parachute Automatic Activation Device that initiates reserve deployment in emergency situations. It is the most commonly used model among sport skydivers as it meets the demands of a wide range of jumpers.
The Expert CYPRES 2 activates the cutter when it detects a descent rate higher than 78mpg (35m/s) at an approximate default altitude of 750 ft (225m) above ground level (AGL). As with all Sport (civilian) CYPRES models, there is a feature that allows the user to increase the activation altitude setting if desired.
The referenced part number is for the 1-Pin version and includes Lifetime Maintenance (LTM). Other variants, such as the 2-Pin version are available. $0.00
L3Harris' AN/PEQ-2A is a weapon-mounted infrared aiming laser and illuminator hardened for use on all small arms and crew-served weapons. The U.S. Military standard for night direct fire aiming and illumination.
$0.00
Manufactured by LB Altimeters, the ECHO is an audible altimeter serving the needs of military jumpers.
Constructed with aircraft-grade aluminum and a large hi-def LCD screen, the ECHO delivers enhanced durability, superior engineering, accuracy, and many other features. It contains 3 warning banks, each with 4 warnings. Paired with the ALFA, it makes the perfect altitude awareness system.
With the ALTISET II, a jumpmaster or mission commander can conveniently program the mBar and warning altitudes to the same reading for a small group or an entire load of jumpers via the IR receiver on the ECHO.
$0.00
The L3Harris GPNVG is a wide field-of-view (97 degrees), helmet-mounted night vision device with white phosphor tube technology for improved target detection and recognition.
FEATURES:- Available with ANVIS or BNVIS mount for use with multiple helmets and mount configurations
- Optional cold-weather patter pack with selectable IR beacon
- Modular design for maintenance and supportability
- Uses four I2 tubes
- Meets military environmental specifications
- High-performance green phosphor tubes provide an enhanced degree of detail and range performance
- Provides the operator maximum visual information for accurate assessment and acquisition
Products advertised for marketing purposes on this site may contain chemicals known to the State of California to cause cancer or reproductive harm. See –