Toll-Free: 866.936.3890
Filters
MRO Products and Supplies from Top Companies
$0.00
- Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach.
- Anti-Slip Design open end (ASD) has locking grooves that help prevent the wrench from slipping off the fastener when turning.
- The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding. Broad size range ensures the right tool for the application will be available.
- Typically used in lower torque applications. Full polish finish provides corrosion resistance and easy to clean surfaces.
- Locking hole feature helps keep the crowfoot wrench engaged on the extension during use reducing downtime due to detachment of crowfoot in awkward spaces.
- Use with locking extensions to reach into small spaces or where the fastener is out of sight.
- Locking hole on 3/8' drive crowfoot wrenches available on fractional openings 1' and larger.
$0.00
- Uni-Cast™ construction of non-ferrous materials eliminates sparking and won't absorb liquids
- No exposed metal on face, head or shaft
- Dead blow function eliminates bounceback when striking hardened surfaces
- Soft face helps prevent marring
- Steel reinforced handle provides strength and resists breaking on overstrike
$0.00
- BladeArmor™ coating on the first 6' maximizes durability of the blade
- High-visibility Mylar® polyester film extends life of entire blade and provides visibility in low lighting
- Chrome case with durable rubber-holds up to heavy use
- AirLock™ rubber slide lock is resistant to impact and makes locking and unlocking easy
- 16' and 19.2' stud center markings simplify framing jobs
- Cushion grip provides comfortable, slip-resistant hold
- Three-rivet, corrosion-resistant Tru-zero end hook for accurate measurements
$0.00
- Black oxide finish.
- Non-reflective ProtoBlack™ finish for use where non-plated products are required.
- 12 Point flare nut box end allows for fine indexing, helping to improve speed and access.
- Pivoting head allows user to place the wrench over the connected pipes to reach the fastener.
$0.00
- One piece forged steel bar for increased durability
- Heat treated and tempered striking face prevents chipping
- Heat-resistant grips are durable and lightweight
$0.00
Made of hardened, shock-resistant steel to precise specifications. Hand ground cutting edge to the exact angle for cutting through tough metals. Black oxide finish highlighted by a bright machined taper.
$0.00
Proto® Ratcheting Wrenches feature a spline ratcheting end to turn multiple fasteners while helping increase the force applied to the fastener
Spline tools engage the flats of conventional nut fasteners to move the loads away from the corner of the fastener and transfer them over a broader surface area
Helps increase the force that can be applied to a fastener
Helps reduce damage to fasteners
Easy to access restricted spaces compared to a socket
$0.00
- Round shanks.
- Tri-lobed handle made from bi-material, helps prevent hand from slipping.
- Precision tips for precise fastener fit.
- Alloy steel shanks heat treated for strength.
$0.00
- Small pear head design for access in tight hard to reach work areas
- 45 tooth gear provides balance between 8 degree articulation angle and high torque carrying capacity
- Sealed design helps prevents debris from entering ratchet mechanism reducing wear - Also, helps to keep lubrication contained within the components, Patent pending design
- Low profile reversing lever design for quick, one hand operation
- Available in three drive sizes: 1/4', 3/8' and 1/2'
- Contoured, ergonomically-designed handle for comfort
- Knurled bands allow for increased grip and slip resistance
- Available in standard and long-length handles in both 3/8' and 1 /2' drive sizes
- Double nickel chrome plated for enhanced corrosion protection
- Full polish finish for superior comfort and easy clean up - Black oxide finishes are also available
- Field repairable
- Limited Lifetime Warranty
- Manufactured to ASME B107.10M specifications
$0.00
- Calibrated to +/- 3% in clockwise direction and +/- 6% counter clockwise direction.
- Calibration is accomplished by mechanical loading each wrench in a horizontal position and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
- Manufactured to meet precision/highly accurate applications such as military and aerospace.
$0.00
- Engineered for general-purpose cutting
- Precision-honed edge for consistent and long cutting life
- Fits most standard utility knives
$0.00
- Safety wire is often used in aviation and other applications where vibration may cause fasteners to back out.
- Heat treated cutting edges for cutting tough stainless steel safety wire.
- Flat top diamond serrations on jaws hold wire securely and resist nicking.
- Diagonal nose allows access in tight work areas.
- Automatic spring return feature speeds operation and reduces fatigue. J190 designed for wire sizes .020' - .041'.
- J191, J192, J195 designed for wire sizes .020' - .060'.
- J192 Ergonomically designed.
- J195 Left hand twist.
$0.00
- Full polish finish provides corrosion resistance and easy to clean surfaces.
- 12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6, and 12 point fasteners.
- Fractional sizes 11/32' and smaller do not have the ASD feature.
- Anti-Slip Design (ASD) open end. -Locking grooves help prevent the wrench from slipping off the fastener when turning. -The arched surfaces are designed to spread the contact forces over a greater area. -Loads are kept off the corners of the fastener which helps prevent fastener rounding.
- Box ends incorporate the TorquePlus™ system.
- Proto® TorquePlus™ wrenches are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy wrench engagement to the fastener flats, not the corners.
- The TorquePlus™ configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the box end, minimizing slippage.
- The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners.
$0.00
- Cubic inch capacity is 28,291.
- Made of 14, 16 & 18 gauge steel.
- Maximum weight capacity for each drawer is 200 lbs.
- Standard red powder coat paint finish. Also available in black, blue and yellow, made to order. Contact customer service for availability. Heavy duty locks with tubular key.
- Recessed aluminum extruded drawer pulls.
- 100% full extension drawers.
- Drawer liners included.
- 6' x 2' Phenolic casters - 700 lbs./Caster.
$0.00
Cubic inch capacity is 15,014. Made of 14, 16 & 18 gauge steel. Maximum weight capacity for each drawer is 125 lbs. Standard red powder coat paint finish. Also available in black, blue and yellow, made to order. Contact customer service for availability. Heavy duty locks with tubular key. Recessed aluminum extruded drawer pulls. 100% full extension drawers. Drawer liners included. 6' x 2' Phenolic casters - 700 lbs./Caster.
$0.00
A full power hot water wash and rinse trailer, Riveer's Advanced Decontamination and Wash System for Hazardous Materials produces a high flow rate that dramatically cuts cleaning time. The ADWS-HM has many other functions as well, including a high-powered, adjustable foamer that integrates with various chemical response agents, and turbine engine flush technology with a multitude of connectors. These unique features make this highly modular unit ideal for emergency response situations, large or small, where hazardous materials or contaminants are present.
- 175 PSI
- Completely self-contained
- Ideal for decontamination and anti-corrosion PM
$0.00
Designed in conjunction with U.S. Navy for aircraft rinsing, the Riveer Aircraft Rinse Cart (ARC) beats the criteria for dependable performance in brutal environments and remote airfield operations meeting the stringent TM requirements for wash, rinse and decontamination procedures. Ideal for on-the-go rinsing of contaminants and hazardous materials from the surface of aircraft, ARC's rugged design includes an aircraft-rated pressure washer that sprays 12 gallons of water per minute out of each wand simultaneously at 175 PSI. The high flow and dual guns, each having a 100' long hose on a manually wound reel, cuts rinsing time dramatically for efficient cleaning of large surface areas.
- U.S. Navy and U.S. Army approved for rinsing fixed wing and rotary wing aircraft
- Ideal for decontamination and anti-corrosion pm of civil and military aircraft
- Safe-for-aircraft 175 PSI
- Simple to operate and maintain
$0.00
The Riveer Rack™ is an effective solution for containing and recovering contaminants, hazardous materials, and wash water, for short or long-term locations. These above ground steel wash racks, featuring a non-slip surface, capture run-off from vehicle and equipment washing while channeling solids for proper disposal. Riveer Rack is modular for easy bolt-together installation which eliminates site engineering and permitting requirements, and can be configured to any size. Awnings and side walls may be added to enhance containment, and dewatering conveyors can be added to help manage heavy solids. Low profile entrance ramps make it easy for low clearance vehicles and forklifts, and inspection ramps may be added to provide access to undercarriages.
$0.00
All ATA series cases are not only certified to ATA specification 300 but manufactured above and beyond this specification. Skydyne cases are designed to secure a variety of long barreled weapons and are unlimited in terms of size and accessories. Custom foam interiors are also available to secure your equipment. Recessed spring loaded handles, tension locking clamps, locking hasp & staple and high impact steel corners are all standard hardware for the ATA series.
$0.00
Formed and welded aluminum construction provides all the benefits of a deep drawn metal case without tooling cheavy duty handle, osts. Features such as louvers, mounting holes and stacking patterns can be positioned at any location on the case. Like all Skydyne cases, the Defender utilizes a welded extruded aluminum tongue and groove edge frame. Manufacturing processes allow for ultimate customization.
$0.00
Using fiberglass in a thermoset resin gives the Patriot series a high strength to weight ratio. Thermoset resins, as opposed to thermoplastic resins, do not soften with higher temperatures. Patriot series cases are available in many configurations and in virtually any size with little to no tooling costs.
$0.00
Laminated construction provides a wide variety of strength and impact resistance. Laminates may include aluminum or plastic skins with cores of foam, high impact ABS, plywood or basswood. Veteran series cases can be manufactured using heavy duty extrusions to meet the most destructive military testing. All configurations and sizes are available without tooling costs.
$0.00
MultiMode™ is a family of collapsible, heavy-duty, multipurpose deployment containers. Used in a shipping container, on a 463L pallet, or independently, MultiMode™ stream-lines inventory control and mobility with its capability to be collapsed, stacked, and locked. Each is composed of extruded aluminum and fiber reinforced composite, and is constructed to be weather, chemical, and UV resistant. Since MultiMode™ containers exist in a variety of different sizes, colors, and configurations, our standard sizes are listed below. Please contact us for custom sizes, colors, or configurations. Replacement parts are also available upon request.
$0.00
The Skydyne Field Desk offers military units lighter, single-tabletop and double-tabletop, aluminum versions of the original military Field Desk. This 'new and improved' Field Desk is equipped with easily-deployable and adjustable legs, which allow each table to be set up quickly and stand evenly on rugged terrains. The Skydyne Field Desk also includes lightweight, removable, aluminum drawer boxes, and one lightweight folding chair per tabletop. Located on the front of the desk, there is a name card holder which allows the personalization of each desk. Replacement parts are available and listed below. Since these desks may be used in various terrains and by various units, Skydyne offers a variety of different color options; custom colors not included below are available upon request.
Products advertised for marketing purposes on this site may contain chemicals known to the State of California to cause cancer or reproductive harm. See –