EOD Gear, CWMD Supplies, and CBRN Protection Equipment

Made of Cooley Coolthane® polyurethane fabric, the P Series is stronger and enjoys two to three times the puncture resistance of Hypalon and PVC products. Tubeseams are heat welded into a single fabric—not glued—forming a joint even stronger than the material itself. In speed tests with medium loads, each of the P Series boats without speed tubes achieved the same top-end speed as a competitive model with speed tubes. Additionally, each of the P Series throw a smaller wake profile, so clandestine operations stay that way.

FEATURES:

• Wing hull design creates hydrodynamic lift andcompartmentalizes running surface to reducevacuum, quicker to plane and greater speeds withheavier loads
• Large interior space
• Polyurethane fabric used for longer life and twoto three times the puncture resistance of Hypalonor PVC
• Thermo welded seams for a joint as strong ascontinuous material
• Composite transom; lighter weight and strongerthan aluminum, will not decay like wood
• California made with U.S. materials and BerryAmendment compliant

The BSEC REBA is designed for use in field conditions and the device is intended tobe robust, hardwearing and the design of the REBA reflects this. REBA provides are-chargeable device that can be refilled in field conditions from conventional divecylinders, or compressed air pump. REBA is designed for use in an emergency eitherin a water, smoke ,or gas filled area. The REBA range is designed to be worn by theoperator in a number of different ways. The REBA 1 & 2 versions are contained withina neoprene sleeve and worn on the wrist or forearm. REBA 3-6 can be incorporatedinto the wearers' MOLLE System or equipment pouches. All of the REBA variantsdeliver an instantaneous source of breathable, compressed air without the needfor manually activating, priming or purging the device. Unlike like the current STASSalternative, REBA can be used in a handsfree manner.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.

We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.

Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.

The MDS-10 dual sensor detector provides unrivalled metal detection and ground-penetrating radar performance in an ultracompact, lightweight platform. The MDS-10 combines cutting-edge simultaneous multi-frequency digital metal detection technology and proven ultra-wideband impulse ground-penetrating radar to detect metal and non-metal targets. The MDS-10 is the preferred detector for military personnel tasked with finding the most challenging metal and non-metal IED components in areas with high metal contamination.

The MDS-10's intuitive and simple-to-operate user interface coupled with its detection performance makes the MDS-10 the most capable Counter-IED detector available.

• Superior Metal & Non-Metal IED Component Detection
• Excellent Landmine and Unexploded Ordnance Detection
• Real-Time GPR Target Visualization
• Night-Vision Goggle Compatible
• Smallest and Lightest Dual Sensor Detector
• Waterproof (IP68)

The metal detection technology of tomorrow is available today. The MF5's simultaneous multi-frequency digital metal detection technology enables operators to detect the most challenging metal and poorly conductive IED targets. The MF5 is the ideal detector for military personnel tasked with finding the most difficult IED components in challenging soil conditions. The MF5's ground balance feature and coil design provide unrivaled performance in all soil conditions – regardless of mineralization, vegetation, and moisture content.

The MF5's performance, features, and functionality greatly enhance an operator's detection capability.

• Superior Metal & Poorly Conductive IED Component Detection
• Excellent Landmine and Unexploded Ordnance Detection
• World-Class Target Discrimination
• Rapid Startup and Deployment
• Simple, Intuitive User Interface
• Night-Vision Goggle Compatible

The F3 and F3 UXO detectors detect all metal and minimum metal mines at full sensitivity regardless of the mineralized content of the soil. These detectors utilize industry-leading pulse induction bi-polar multi-period sensing and ground balance technologies. These technologies allow operators to not only achieve the highest metal detection sensitivity but also to eliminate false alarms caused by mineralized soil. The F3 and F3 UXO detectors are specially designed to meet the requirements of humanitarian demining and military mine clearance professionals.

The F3 and F3 UXO detectors' superior performance, simplicity, and safeguards made them one of the most widely used metal detectors in the world.

• Industry Leading Landmine & Unexploded Ordinance Detection
• Maximum Metal Detection Depth
• Exceptional Performance in Highly Mineralized Soils
• Simple, Intuitive Operation
• Designed to Prevent Operator Error
• Highly Rugged

The ZERO POINT TiTAN 12 gauge disruptor meets the demands of both general and precision Improvised Explosive Device Disruption (IEDD). Its many configurations allow the operator to switch effortlessly between the precision aim to general disruption.
Serving both dismounted and conventional bomb squads, the TiTAN is a full spectrum disruption system incorporating a family of auxiliary equipment to increase efficiency and effectiveness.

Our proprietary TiTAN laser aiming system is water-resistant, easy twist on/off and specially fitted for all TiTAN configurations making the ZPL-EOD the most accurate, dependable and operator-friendly disruptor laser available.
Our standard TiTAN System has all the components required for a full 12 gauge disruption both on land and in water. Additional accessories are available to allow for operation within any environment without fear of damaging the disruptor's breech and keeping the TiTAN secured to any hardpoint during operations.

The Zero Point Electric Breech can be used to fire the TiTAN either on remotely operated vehicles or as a standalone. The rugged design of the breech has been field-tested by veteran EOD techs for reliability in all conditions on land or in water.
Rated to a depth of 60 feet saltwater. This capability allows the TiTAN to be utilized in a maritime environment for unforeseen threats.

The electric breech is designed with a mechanical safety on the back that is 100% effective in mechanically blocking the firing pin from moving. This ensures the safety of operators during the handling of loaded TiTANs.

The 1ST LINE SENIOR EOD provides the EOD Operator with a heavily outfitted and extremely versatile tool set for conducting immediate-action render safe procedures in a dynamic environment.
This kit can also be used forensically to examine or dismantle items of concern.

Discover new dimensions with Vidisco XAR 3D threat detection. With one downrange approach, the operator can see the object from several points of view and receive a multi-layer, X-ray, optic (real world), and combined image.
Vidisco XR200 enables the detection of the internal object components and location and acquire deep learning data in realtime.
This groundbreaking solution is ideal for IED disruptive procedures as well as threat detection training. As threats become more challenging and sophisticated, Vidisco XR200 helps EOD & IED units stay one step ahead!

Its image clarity and rapid deployment capability are all essential to serve the evolving dynamics of law enforcement activities. This system is designed for backpack carry.

The Single Vessel Oxygen Storage System (SVOSS) is a large volume mobile compressed oxygen workstation. Developed for various operational applications, including medical operations, high-altitude jump operations, and exothermic breaching operations.

The SVOSS provides up to 339 CF (@ 3000 psi) of compressed oxygen, giving a team requiring a very large, but portable reservoir of compressed oxygen a sizable advantage in almost any situation

SPECIFICATIONS

• Single 1910 cu in aluminum lined carbon fiber cylinder
  
• CGA540 Inlet fill port with isolation on/off valve
  
• Cylinder and outlet pressure gauge
  
• Adjustable regulator for output adjustment
  
• Three (3) QD outlets for connecting multiple LP O2 hoses
  
• Removable and stowable wheels for system stacking and mobility when needed
  
• Built in mounting system for connecting multiple SVOSS systems together
  
• Dimensions: 56.5" H x 12" D x 12" W
  
• Weight: 92 lbs empty/103 lbs filled @3000 psi
  
• Capacity: 9.584 L @3000 psi (339 cubic feet)
  
  

The SETS™ Responder system allows first responders to use existing medical cylinders for exothermic cutting during rescue operations. The system gives the first responder the ability to burn through metal, locks, and hinges with ease.

The SETS™ Responder was designed for use in conjunction with medical oxygen cylinders with a CGA870 post valve connection.

SPECIFICATIONS

• Can be used with existing medical oxygen cylinders (post style)
  
• CGA870 regulator connection
  
• Quick connect/disconnect rod cutting control handle
  
• 9V battery rod ignition
  
• Compact nylon carry case
  
• Dimensions (with medical "D" cylinder): 22" L x 9.5" W x 5.5" H
  
• Weight (with medical "D" cylinder): 13.5 lbs.
  
• Cutting capability: (3) 18" SETS Exothermic Rods @ 2000 psi (O2)
  
  

The Pelican® Mounted Pump System (PMBPS™) was designed for mobility and ease of use for the transport of oxygen boosting capabilities for the refilling of oxygen systems.

The PMBPS™ is built within a mobile hard case with boosting capability of 3,000 PSI. The case includes everything needed for oxygen regulation for a safe rate of filling.

The PMBPS™ is available with optional charge hose connections for use with a variety of oxygen systems.

PMBPS™ SYSTEM FEATURES

• Voltage Requirements: 120 60 Hz VAC Driven (also available in 220V 50 Hz)
• Integrated HP regulator for maintaining safe oxygen charge rate
• Compact control panel for operation of the system
• Dimensions: 26.5" L x 25.25" D x 26.5" W
  
• Weight: 166 lbs (75.3 Kg)