The M256A1 Kit can detect and identify field concentrations of nerve, blister (including Mustard and Lewisite), and blood agents in both vapor and liquid form in about 15-20 minutes. Used after a chemical attack, the M256A1 Kit can determine the type of agent present, or can confirm the absence of a hazardous concentration of an agent — making it easier to determine if it's safe to unmask or reduce the protective posture level.

In 2012, the State of California's FIRESCOPE Standardized Equipment List, listed the M256A1 as a required item for emergency and Hazmat first responders.

The TIFFANY-M Atmospheric Water Generator (AWG) produces 5-16 gallons (19-60 L) of top-quality drinking water from the air everyday - no raw water source is required. The unit uses an in-house EPA-recommended ozone water treatment and mineralization system to ensure high-quality drinking water with zero toxins, zero contaminants, and zero byproducts. The TIFFANY-M eliminates reliance on groundwater, tap water purification systems, and single-use plastic water bottles and provides a reliable, independent, and mobile source of healthy drinking water.

RussKap Water AWG units are proudly made in USA by a skilled engineering team led by US military veterans.

Features:

• Auto-fills and manages internal storage tank with water from air.
• User-friendly interface and easy push-to-dispense controls.
• NSF-61 certified and FDA approved components.
• EPA-recommended ozone water treatment.
• Internal mineralization system.
• Ruggedized design with protective exterior coating.

Benefits:

• Healthy and reliable source of toxin-free, high-quality drinking water.
• Optimal quality and taste with alkaline pH levels and essential minerals.
• Self-replenishing and fully-renewable drinking water supply.
• Mitigate logistics by sourcing drinking water on-site at the point of need.
• Independent and mobile source of drinking water.
• Eliminate reliance on groundwater, tap water purification systems, and single-use plastic water bottles for drinking water needs.

Technical Data:

• Daily Water Production (24-hour period): 5-16 gallons (19–60 L)
• Internal Water Storage Tank Capacity: 9 gallons (34.07 L)
• Dimensions (L / W / H): 22.25 / 16 / 46 in (57.15 / 40.64 / 116.84 cm)
• Dry weight: 130 lbs (58.97kg)
• Power: 110V / 60Hz, 737W, 6.3A
• Operating Temperature Range: 60°F-95°F (15.5°C–35°C)
• Operating Relative Humidity Range: 35%-99%
• Operating Dew Point Level: +45°F (+7.22°C)

Non-tactical shelter designed to offer an economical solution for humanitarian aid in the event of a natural disaster or conflict worldwide. This shelter is capable of withstanding a steady wind speed of 55 mph with gusts up to 65 mph, 10 psf snow load and 4" per hour rain load. The shelter is water, ultraviolet, fungus, mildew, and flame resistant. The is a 100% Berry Amendment compliant shelter. 1-Year commercial warranty.

UAV LAMSType UAV/Drone, includes a retractable Tri-lid Eyelid Door, allowing for full-width entries when in the open state and protection from environmental elements when in the closed state, and gable end wall with sliding fabric door. This shelter also includes vehicle and personnel side doors, allowing for easy access. Celina's LAMS are designed for various uses, including maintenance space, general purpose, general storage, training space, and aircraft hangers. This expeditionary shelter design is completely mobile and relocatable, and can be deployed on any ground type. Pre-assembled hardware allows for quick shelter installation. Celina's Large Area Maintenance Shelters are Berry Compliant.
SKU: C23083X164TT-T
Dimensions : 83'W x 164'L, 10' Eaves
End Configuration: Tri-Lid end, Gable (flat) end

Features:

• Tan 686A (color #33446) or camouflage green 483 fabric color options
• Pre-Engineered Aluminum frame support system
• Fully relocatable and ground deployable
• Pre-assembled hardware minimizing on-site assembly
• Integrated keder tracks for simple fabric attachment
• Modular design allows for expandability

Specifications:

• Engineered to 90 mph wind load (up to 115 mph avail)
• Engineered 8 psf of snow for up to 12 hours (up to 20 psf avail)
• Rain load of 4" per hour with 40 mph winds
• Water-resistant, flame-retardant fabric (MIL-PRF-32504)
• Berry Amendment Compliant

UAV LAMS Type UAV/Drone, includes a retractable Tri-lid Eyelid Door, allowing for full-width entries when in the open state and protection from environmental elements when in the closed state, and gable end wall with sliding fabric door. This shelter also includes vehicle and personnel side doors, allowing for easy access. Celina's LAMS are designed for various uses, including maintenance space, general purpose, general storage, training space, and aircraft hangers. This expeditionary shelter design is completely mobile and relocatable, and can be deployed on any ground type. Pre-assembled hardware allows for quick shelter installation. Celina's Large Area Maintenance Shelters are Berry Compliant.
SKU: C23083X142TG-T
Dimensions : 83'W x 142'L, 10' Eaves
End Configuration: Tri-Lid end, Gable (flat) end

Features:

• Tan 686A (color #33446) or camouflage green 483 fabric color options
• Pre-Engineered Aluminum frame support system
• Fully relocatable and ground deployable
• Pre-assembled hardware minimizing on-site assembly
• Integrated keder tracks for simple fabric attachment
• Modular design allows for expandability

Specifications:

• Engineered to 90 mph wind load (up to 115 mph avail)
• Engineered 8 psf of snow for up to 12 hours (up to 20 psf avail)
• Rain load of 4" per hour with 40 mph winds
• Water-resistant, flame-retardant fabric (MIL-PRF-32504)
• Berry Amendment Compliant

Celina's Multi-purpose Area Shelter System (Type I) is designed to provide increased environmental protection and energy efficiency to the warfighter. The shelter is a field-proven subsystem within the U.S. Air Force's BEAR Kitchen System, and has been deployed to numerous locations worldwide. The system is supported by a lightweight, rigid framework and designed to be deployed within a moment's notice. It is transported in all shipping configurations (land, air and sea), and easily erected. Celina's Multi-purpose Area Shelter System is Berry Compliant and capable of being extended or complexed.

Celina's Multi-purpose Area Shelter System (Type II) is designed to provide increased environmental protection and energy efficiency to the warfighter. The shelter is a field-proven subsystem within the U.S. Air Force's BEAR Kitchen System, and has been deployed to numerous locations worldwide. The system is supported by a lightweight, rigid framework and designed to be deployed within a moment's notice. It is transported in all shipping configurations (land, air and sea), and easily erected. Celina's Multi-purpose Area Shelter System is Berry Compliant and capable of being extended or complexed.

EMI protected LED shelter light. Compact enough to leave in the shelter dureing storage. Mounts close to roof line for more head room with miltiple options for attachment

Offering rugged construction and high performance, the Jameson LED floodlight was designed to go wherever the job takes you.

Jameson's lightweight floodlight is battery-powered with an integrated carrying handle for maximum portability.

PAXLight® 36 inch Focal Length in Case - Field Hospital Light in Transport Case.

The PAXLight is a single minor surgical luminaire intended for use in the patient environment to support treatment and diagnosis which can be interrupted without any hazard to the patient in case of failure of the light.

The luminaire has three LED light sources on a single head. The product is suitable for use in operating rooms.

The Next Generation JLTV Assault Kitchen is a highly mobile, company-level feeding solution designed to support light to heavy forces in dynamic field environments. Engineered for rapid deployment, the system can be fully operational in 10 minutes or less and mounts to a JLTV cargo trailer for seamless tactical mobility. On-the-move heating ensures meals are hot and ready upon arrival, enabling efficient feeding at multiple locations. The kitchen supports up to 250 UGR Heat & Serve meals and can prepare up to 150 UGR-A rations using an integrated M59 Field Range and griddle. A gas-strut-assisted roof lift allows fast, low-effort setup and teardown, while deployable flaps and an awning provide covered feeding areas. Powered by 24V DC vehicle power and certified for air, land, and sea transport, the Assault Kitchen delivers flexible, reliable feeding capability for expeditionary operations.

The Cobra Sled is the lightest and smallest hoistable evacuation stretcher on the market. The Cobra Sled's hoist straps are made from 5,500 lbs tensile strength Kevlar webbing with Kevlar stitching. An integrated chest harness directly attaches to both the horizontal and vertical hoist straps. There are four front drag straps that create 2 x 10 ft loops for operators to sling and drag forward in a hands-free configuration, as well as stabilizing straps in the back for uneven terrain. Additionally, the Cobra sled has 4 ways to EXFIL an injured person. Not only can it be dragged but the Cobra sled also has carrying handles for a 4-person litter carry, but you can also use the hoisting straps to create shoulder loops for a hands-free carry. Finally, you can add our lightweight combat carbon fiberpoles to do a 2 person litter carry.

The R-LIFT is a fully rigid litter that deploys in seconds utilizing the Combat Carbon Poles. It boasts a maximum load-carrying capacity of 400 lbs. The litter is constructed from MATBOCK's Ghost Heavy material, offering extremely high abrasion resistance and strength. It will not absorb chemical or biological hazards. The R-LIFT is constructed entirely with Kevlar webbing and thread to prevent corrosion and fully decontaminate without material degradation. The R-LIFT has a built-in inflatable air bladder to support the head and align the spine. Additionally, the R-LIFT comes with a replaceable integrated emergency blanket that can be deployed quickly to prevent hypothermia. Lastly, the stretcher offers straps to securely attach the patient while moving over rough terrain. Easy and fast to assemble with only 1 person, the R-LIFT is compact for easy storage and transport. The carrier allows for storage of the R-LIFT, either disassembled or partially assembled, and a three-flap design makes for quick but secure packing while in the field.

eNcounter's AI-powered virtual triage uses
built-in symptom checking to assess patient-reported
information and intelligently route patients to
the appropriate provider, service line, or care pathway.
By automating early intake and routing decisions,
AI-powered virtual triage helps reduce administrative
workload, improve care navigation, and ensure
patients reach the right level of care from the first
point of contact.

Marital discord can take a toll on your well-being, contributing to stress, anxiety, depression, and even substance abuse. But with LoveEveryDay, couples find a powerful path to healthier and happier partnerships.

Through quality interactions, couples reconnect emotionally, renew attraction, and strengthen long-term bonds. Users consistently report that LoveEveryDay has significantly improved their sense of partnership and commitment while cultivating supportive behaviors.

The MC2 is a portable, wireless, two-piece X-ray system that allows diagnostic-quality imaging anywhere care happens.
Designed for orthopedics, sports medicine, urgent care, and foot & ankle practices, it delivers static
and dynamic imaging without the bulk, cost, or
room-shielding requirements of traditional C-arms.
Precision auto-collimation and low-dose capture settings keep patient radiation exposure targeted
and minimal.

Compact, Portable Military 10 Gigabit Media Converters with optional PoE PSE/PD and Security

M2192 SERIES DC/DC Power Supply, VITA 62 1" Pitch, SOSA TM ALIGNED, 3U FORM FACTOR, 600W Steady State, NED (Optional). OPERATING TEMP: –55°C to +85°C EMI: Compliant to MIL-STD-461G (5µH LISN), Environmental: MIL-STD-810. Input Options: MIL-STD-704, Mil-STD-1275

MILTECH 303 is a Military Rugged USB 3.1 HUB with robust power management and charging. It has 1 x upstream port, 5 x USB 3.1 downstream ports, 1 Gigabit Ethernet port, and a dedicated IO port.

MILTECH 304 is an Ultra-Compact Rugged Fast Ethernet Switch with 4 x 10/100Mbps ports with rugged SCE2 circular connectors.

MILTECH 308 is an Ultra-Compact Rugged Fast Ethernet Switch with 4 x 10/100Mbps ports with rugged SCE2 circular connectors.

Mithix Pro has a complete line of hard to find Berry Compliant Hand Tools and Soft Goods. From custom vise clamp pliers, titanium tools and unique items to standard tools that are all Berry Compliant, we have a large selection as well as soft and hard cases, with or without custom cut foam.

For Soft Goods, we have everything from paracord to Kevlar, Dyneema, Climbing and Poly Ropes and Lines, from the smallest diameter to the largest. Mithix Pro manufactures slings, straps, bags, packs and pouches of many shapes and sizes with quick turnaround. Count on Mithix Pro for all your soft-good Berry Compliant product needs! Made in USA and Berry Compliant.

The NOVO Folding Slider II is the ideal solution for screening large objects.

Features:

• Built-in controller and power supply
• Controlled by the NOVO Touch Software
• Completely automated movement
• Automatically generates an outstanding high-quality mosaic image
• Small footprint for max portability & easy storage
• Fits into the Trunk of a Standard Vehicle
• With NOVO 15WS: Grabbing Size: 3×2
• With NOVO 22WS: Grabbing Size: 2×2
• Imaging Area: 37.4" x 13.8" x 7.9"
• External Case Dimensions: 44.2" x 16.1" x 14.0"

Rover II System - Top of the Line System

• 22WS Detector - weighs only 6.1 lbs. (2.8kg) and provides outstanding image quality with 90mm (3.5") steel penetration with Golden XRS-3. The Detector is very robust with a 40" (100cm) drop test and 660 lbs. (300kg) load proof
• Falcon II Controller - up to 500m Line of Sight wireless Comm•
NOVO Bright XL 21.5" Tablet - Super bright 1500 NIT touch tablet & NOVO Touch Software
• 50m Cable on removable mount reel
• MIL-DTL-38999 Connectors• Compact Pelican light case
• Supports multi tablet control & display
• Proprietary super powerful Genie enhancement feature & super fast Stitching feature• Compatible with XTK