Toll-Free: 866.936.3890
Filters
$0.00
This highly durable extinguisher features an easy-to-use light to medium duty anodized aluminum valve body and anodized aluminum handle and lever. It's built for longevity with durable high gloss polyester powder paint and an all- metal valve construction. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator. Equipped with Bilingual Labels.
$0.00
This extinguisher contains regular powder which is a siliconized sodium bicarbonate based dry chemical with free flowing and non-caking additives. E. With lower initial cost and recharging, it offers economical Class B & C protection. This chemical smothers fires in flammable liquids and pressurized gases and will not conduct electricity back to the operator. It features an aluminum valve with a light- to- medium anodized aluminum valve body and an anodized aluminum handle and lever. This extinguisher is built for durability with a high gloss polyester powder paint and all-metal valve construction. Temperature Range -65°F to 120°F. Bilingual Labels. Vehicle Bracket Included.
FEATURES:
FEATURES:
- Rating 10B, C
- Weight 5.5 Lbs.
- Regular Dry Chemical
- 6-year warranty
$0.00
The Amerex Compliance Flow extinguisher has a higher UL rating, extended discharge times and lower flow rate, allowing it to meet or exceed a diverse array of code requirements. If meeting code requirements in a harsh industrial setting is a priority, Compliance Flow models are likely the best choice for you. With our exclusive Amerex paint process and proprietary zinc primer, fewer moving parts and simple design, these extinguishers provide the ultimate in corrosion resistance, plus minimal repair and maintenance costs over time.
FEATURES:
FEATURES:
- Rating 4A; 80B: C
- Weight 31 Lbs.
$0.00
Finally, a serious pant designed for all hazard professionals. After years of research, design, and rigorous testing, CrewBoss has developed the ultimate first responder pant. Triple certified to meet NFPA 1977 Wildland Firefighting edition 2011, NFPA 1975 Station/Work Uniform for Emergency Management, and NFPA 1951 Technical Rescue (Utility) 2007 edition, the Elite Pant allows you to be ready for any mission critical assignment.
- Certified to NFPA 1951 - 1975 - 1977
- Oversized, extra deep front slash pockets
- Stress points bar tacked at 38 locations for maximum durability
- Exclusive crotch reinforcement panel
- Internal Smartphone pocket
- Internal BDU divider pocket
- Pleated cargo pockets with drain holes
- Reinforced, articulated knees
- Elastic back band for ultimate freedom and comfort
- Two generous rear pockets
- Extra roomy leg and seat cut
- Nomex thread throughout
- Hook and loop ankle straps covered with self-fabric for heat resistance
- Color: Navy Blue
$0.00
The CrewBoss Brush Coat remains the traditional Wildland firefighter's first choice. The optional button-in thermal liner adds extra warmth when spiked out or during any night operation. The raglan - cut sleeve, fully concealed, nickel-plated, snap front closure and turnout-style collar with self-storing throat strap encompass the classic elements of personal protective coats that have worked for firefighters across the country of years.
- Certified to current NFPA 1977 Standards
- Large right breast pocket with hook and loop closure.
- Radio pocket on left breast.
- Two large hip pockets with hook and loop closure.
- Adjustable hook and loop cuff closures.
- Fully concealed, nickel-plated, snap-front closure.
- Raglan-cut sleeves.
- Turnout-style collar with self-storing throat strap.
- Leather tabs for button-in thermal liner.
- Stitched with Nomex® thread throughout.
- Color: Yellow
$0.00
Based off the original Forest Service style brush shirt, the Traditional Brush Shirt is designed for optimal functionality on the most high-pressure fire lines. The Traditional Brush Shirt includes features such as; large spade-style pockets with hook and loop closures, as well as hook and loop closures around the cuff to insure a tight fit around the glove. Available in either Nomex IIIA or Tecasafe Plus, the Traditional Brush Shirt provides superior personal protection with dependable strength that is lightweight, breathable and inherently flame resistant.
- Certified to current NFPA 1977 Standards
- Large spade-style pockets with hook and loop closures.
- Forest Service style button-front closure.
- Hook and loop cuff closures insures tight fit at the glove.
- Extra-long square-cut tails.
- Nomex® thread throughout.
- Stress points bartacked at 10 locations.
- Color: Yellow
$0.00
Pallet storage buildings provide compliant solutions for the storage of hazardous waste and other chemicals. Each unit is designed to compliantly storage pallets or totes on a raised floor with EPA compliant spill containment located directly beneath this floor. Removing the galvanized steel grating, which is screwed to the floor supports, accesses the spill containment area. These buildings are designed for permanent installations, but can be relocated as needed. Swing doors are installed with hold open latches for ease of loading/unloading. A full line of accessories can be added to these units for any operation. This includes lighting, fire suppression, cooling, heating and other aspects. Custom sizes are available, each building has a 15-year structural warranty.
$0.00
U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
$0.00
U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
$0.00
U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
$0.00
U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
$0.00
Berg offers fresh water and waste pumps individually or in pump sets to meet customers' needs. Both the Fresh Water and Waste Pumps are constructed of aluminum and have a thermal powder coating and brass fittings which enhance durability and longevity.
The Fresh Water pump is designed with a 3 HP pump and 8-1/2 gallon pressure tank that is capable of a 40 GPM throughput. It is designed to hold plumbing pressure up to 60psi. The built in pressure gauge is conveniently located to allow easy access and viewing.
FEATURES:
The Waste Pump has custom control box to allow automatic function and the ability to switch over to manual control when desired. To ease cleanout of grinder pump, each pump is designed with flexible P-traps and an integrated drain.
FEATURES:
The Fresh Water pump is designed with a 3 HP pump and 8-1/2 gallon pressure tank that is capable of a 40 GPM throughput. It is designed to hold plumbing pressure up to 60psi. The built in pressure gauge is conveniently located to allow easy access and viewing.
FEATURES:
- Pumps are equipped with three independently valved 1 ½ Outputs; one 1 ½ Input, and one ¾ Input.
- The Pump measures 2'-2' x 2'-1/4' x 1'-10' and weights 85lbs.
The Waste Pump has custom control box to allow automatic function and the ability to switch over to manual control when desired. To ease cleanout of grinder pump, each pump is designed with flexible P-traps and an integrated drain.
FEATURES:
- Each pump comes with a removable Power-Tee Electrical Box and is equipped with two 3' Black Water Inputs; one 2' Grey Water Input, and one 2' Output.
- The Pump measures 28.4' x 24.5' x 2'-1 1/4' and weights 205 lbs
$0.00
Berg offers a wide variety of spill containment berms up to to meet diverse customer needs. Customized berms are also available to meet unique requirements and all berms can be easily customized with private labels, logos or other requests.
FEATURES:
FEATURES:
- Throw N' Go
- Throw and Snap
- Snap -Up
- Perma berm
- Foam Berm
- Flexible Spill Pans
$0.00
Rechargeable Li-Ion battery suitable for distributed modular wearable power. Higher energy density than BB-2525/U: 210Wh/kg vs. 127Wh/kg and 316Wh/L vs. 194Wh/L.
FEATURES:
FEATURES:
- Qualified to MIL-STD-810 and MIL-STD-461
- Compliant with System Management Bus Specification (SMBus) v1.1 and Smart Battery Data (SBData) v1.1
- Absolute state of charge indicator
| Bren-Tronics Part Number | Nominal Amp-Hour Capacity | Nominal Energy Capacity |
|---|---|---|
| BT-70909AK | 5.0Ah | 75Wh |
| BT-70909AE | 5.6Ah | 84Wh |
| BT-70909AG | 6.4Ah | 98Wh |
| BT-70909AV | 6.8Ah | 99Wh |
$0.00
This is the best AN/PRC-148 built battery today. Run time is over 40% improvement over the standard commo shop AN/PRC-148 battery. Meets or exceeds all military rechargeable durability specifications. Works in all variants of the AN/PRC-148 & WAVE radio.Communicates using a single wire DQ interface. Recommended charging platforms include Bren-Tronics SPC, SPC Lite, VMC, VMC Lite, Solar Charger Controllers, and single-station chargers.
FEATURES:
FEATURES:
- Dimensions (LxWxH): 2.8 in (71 mm) x 1.6 in (41 mm) x 0.75 in (86 mm)
- Weight: 0.75 lb (0.34 kg)
- Connector has flat contact (bottom), Fly Wheel Connection (top)
- MAX Power 8 Amp
$0.00
The 10. 8V, 9. 6Ah Rechargeable Lithium-Ion Battery includes SMBus v1. 1 and SBData v1. 1, plus an absolute State-of-Charge indicator with five (5) segment LCD with constant display. Typically used in Soldier Systems: Land Warrior Programs and International Soldier Modernization Programs. Recommended charging platforms include Bren-Tronics SPC, SPC Lite, VMC, VMC lite, and Solar Charger Controllers.
FEATURES:
FEATURES:
- Dimensions (LxWxH):
- 7. 8in (198mm) x 3. 0in (77mm) x 0. 98in (25mm)
- Weight: 1. 3lb (0. 6kg)
$0.00
The Soldier Portable Charger Lite (SPC Lite) is a charger for a large range of Military communication and electronics batteries using a designated adapter designed for field or common use. Powered from 22V-33V DC or 90V-260V AC and is capable of quickly charging up to two (2) batteries simultaneously with an easy to follow LED lighting sequence. Built with upgradable software that can easily be installed in the field or lab environment through the RS-232 port. It also includes a recondition feature for NiCd revitalization or Li-Ion destorage. Comes with BB-2590/390B/U adapter (BTA-70834), and AC/DC cables.
FEATURES:
FEATURES:
- Dimensions (LxWxH): 13.7 in (349 mm) x 10.3 in (261 mm) x 7.7 in (194 mm)
- Weight: 15.0 lb (6.81 kg)
$0.00
The X90 AC Inverter and USB Charger allows you to charge up your USB powered devices using standard X90 batteries and also obtain 120W, 115V AC output up to a peak power of 200W with a modified sine wave inverter. Provides USB outputs a total of 3.1A. Its internal protection circuitry automatically shuts down in case of output shorts, excessive current draw, and temperature overload. Built with ON/OFF switch and LED status indicator.
FEATURES:
FEATURES:
- Dimensions (LxWxH): 4.6 in (117 mm) x 2.6 in (66 mm) x 1.7 in (43 mm)
- Weight: Without battery pack, 0.53 lb (0.24 kg)
$0.00
Soldier Portable Charger (SPC) and SPC Lite adapter which holds 2 MBITR (AN/PRC-148) Lithium-Ion batteries. It is one of many Interchangeable adapters within the Bren-Tronics family of adapters for these two versatile SPC and SPC lite chargers. It can hold one (1) or two (2) batteries on either SPC or SPC Lite chargers. When used on a SPC charger, it can hold one (1) to four (4) adapters. When used on the SPC Lite charger it can hold one (1) adapter.
FEATURES:
FEATURES:
- Dimensions (LxWxH): 3. 5in (89mm) x 5. 5in (140mm) x 2. 4in (62mm)
- Weight: 0. 56lb (0. 25kg)
$0.00
The X90 Scavenger allows the user to scavenge power from a non-rechargeable X90 type battery such as the BA-5590 or BA-5390 batteries. When used with multi-chem charger BTC-70824-2 you have a very light weight charger combination. Because most BA-5590/BA-5390's are discarded with more than 30% energy remaining, the Bren-Tronics X90 Scavenger maximizes their use. Also works with all rechargeable versions of the X90 battery line.
FEATURES:
FEATURES:
- Dimensions (L): 8. 0in (203mm)
- Weight: 0. 37lb (0. 17kg)
$0.00
The BT-70791JV is the highest energy BB-2590/U type battery fielded today. When you need the highest energy, the BT-70791JV is your battery of choice.
FEATURES:
FEATURES:
- High energy
- Low temperature
- Standard BB-2590/U form factor
$0.00
Designed for use in harsh environments, these rugged work lights are ideal for manufacturing, inspection and maintenance applications. LuxCommander Portable Work Lights are typically used in aircraft and aerospace applications, as well as shipyards, construction sites, temporary emergency shelters and anywhere powerful, portable lighting is needed. LuxCommander Portable Work Lights are also lighter in weight, more compact, and more energy efficient than competitive products. Superior Light Output Equals Increased Safety. With versions ranging from 8,200 to 16,400 Lumens, The LuxCommander Portable Work Lights supply three times more light than conventional fluorescent work lights, resulting in brighter and safer work sites. The fixture's ballast accepts anywhere from 120 to 277 VAC with appropriate connector.
$0.00
The Multi-Fuel Expeditionary (EX)-Power generator is capable of running on military grade fuels such as JP-8, F-24, JP-5, and JET-A for US Military applications. The Ex-Power 1000 is one man portable (32.9 lbs), quiet, easily maintained, and easily deployed. The Ex-Power 1000 will provide 900 watts of sustained, clean, inverted AC power.
Dimensions: 18'L x 11.5'W x 15'H Specifications:- A/C Output: 0-900W continuous at sea level
- Peak AC Output: 1000W
- Fuel Tank Capacity: 0.6 gallons
- Fuel: JP-8, F-24, JP-5, JET A
- Auto Temperature Control
- Ability to Parallel
- 5-gallon Fuel Extension Kit
$0.00
GALVION POWER AND DATA HUB (PDH-2) supports a wide range of commonly used soldier-worn systems in use today by integrating seamlessly with soldier-worn equipment and a power source. The soldier can scale their wearable power and data to what they need rather than carrying a larger hub system they don't need.
- Connects and supports handheld radios, smart devices, and Nett Warrior-style batteries
- Eliminates the need for individual device batteries by providing power management through a singular port
- HUB application pairing to provide maximum control over power management
- Waterproof at 1 meter for 30 minutes (as per MIL-STD-810 Method 512.5)
- Operating temperature of -22°F (-30ºC) to 149°F (65ºC)
- SMBus 1.1 & 2.0 on BB-2590 & BB-2525, DQ on MBTR compatible
- Fits inside MOLLE strap
Products advertised for marketing purposes on this site may contain chemicals known to the State of California to cause cancer or reproductive harm. See –