Maritime Operations Equipment
- Permanent heat-welded seams, not glued seams, for extended service life
- Polyurethane fabric demonstrates 2-3 times the puncture resistance of Hypalon or PVC
- Patent pending hull design promotes lift, reduces drag and affords quicker time to plane
- Tapered buoyancy tubes afford more usable interior space and reduces weight for greater fuel efficiency
- Non-deteriorating composite transom
- Berry Amendment Compliant
- Choice of 6, 9 and 18 gallon capacity (including diesel fuel, aviation gasoline, JP-5, JP-8 and automotive gasoline
- Durable polyurethane black fabric with black hardware
- Welded seams
- Designed to eliminate trapped air for easy filling
- Patent pending Speed Step design creates hydrodynamic lift and compartmentalizes the running surface to reduce vacuum' affording higher speeds with heavier loads, quicker to plane and greater fuel efficiency
- Tapered tubes result in less resistance in wind and waves for faster performance and a smaller wake
- Tapered tubes and Wing design yields 20% more usable interior deck space, less weight
- Polyurethane-coated fabric affords superior air retention compared to Hypalon®/CSM//CSPE and 25%-50% longer service life
- Composite transom/floor boards resist rot/decay from water intrusion
- Heat-welded seams are significantly stronger than glued seams
- Faster repairs in field (a workable adhesive bond for urethane takes five hours versus two days for Hypalon/CSM//CSPE)
- Berry Amendment Compliant, Buy American Compliant
The SkiCollar™ is an ultra durable inflatable tube that can be easily affixed to many PWC hulls to improve lateral stability, afford shock absorption and provide additional flotation. It installs quickly to the craft with minimal hardware or tools, greatly improving PWC stability without sacrificing exhilarating speed and tight turning capabilities. Applications range from rescue/patrol, protection for rental units, or simply training wheels for novice riders.
- Improves lateral stability
- Affords shock absorption
- Provides additional flotation
- Lightweight ' does not impede performance
- Easy to install on many PWCs
- Exclusive to the Sentinel series dry suits feature:
- Mobility Based SizingTM Ð offers users a semi-custom size fit that reduces bulk and increases mobility
- Rapid Repair TechnologyTM Ð enables users to field replace neck and wrist seals and repair small leaks in an hour or less
- 35 lb (150 N) buoyancy when inflated per pouch or 70 lb (300 N) total buoyancy
- Available in Coyote Tan or Black outer shell
- Available with a yellow bladder with SOLAS tape (MD1250) or an OD Green bladder w/o SOLAS tape (MD1250 SO)
- Each pouch includes the MA7219 Manual Conversion Cap
- 50 mph dynamic strength-tested construction
- Approved for use on inspected and uninspected vessels of any size
- Ideal for constant wear situations, hot humid conditions and high-mobility requirements
- 35 lb (150 N) buoyancy when inflated, twice the flotation of foam work vests
- Offers greater mobility than foam work vests
- Neoprene collar offers unsurpassed comfort
- Recessed zipper protects teeth from oil, grease and other contaminants
- PU-coated nylon shell improves puncture and abrasion resistance
- Custom-molded inflator cover reduces wear and protects inflator
- SOLAS tape on front and back outer shell
- Inflator is maintenance free for 5 years from date of manufacture (unless inflated)
- Easy to clean components
- Lightweight and comfortable design
- No inflator maintenance is required for five years from date of manufacture (unless is inflated)
- 35 lb (150 N) buoyancy when inflated
- Available in Coyote Tan or Black outer shell
- Available with a yellow bladder with SOLAS tape (MD3196) or an OD Green bladder w/o SOLAS tape (MD3196 SO)
- Optional MA7219 Manual Conversion Cap allows the user to switch between auto & manual inflation
- USCG Approved Type V (Commercial Use); Type II (Recreational Use)
- 35 lb (150 N) buoyancy when inflated
- Zippered, splash-proof pocket for your phone, keys or license
- New easy-to-clean Comfort CollarTM improves comfort and durability
- Bright yellow inflation cell with SOLAS reflective tape, safety whistle and strobe light attachment
- D-ring
- Inflator is maintenance free for 5 years from date of manufacture (unless inflated)
- Includes a back flap that can be silk screened with your department identification (use MD3183 GS for no back flap
- Colors: Orange/Black, Olive/Black, Navy/Black, Black
- Approved in the USCG Rescue & Survival
- Systems Manual
- Meets 50mph Dynamic Strength Rating required for use on USCG high-speed vessels
- 32 sq. inches of SOLAS retro-reflective tape on
- front & back
- Mesh upper offers mobility and comfort
- Two large front pockets with VelcroTM closure
- Side adjustments for dual sizing
- D-ring for 'kill-switch' and/or accessories
- Order MV1254 v22 for USCG markings
- Order MV1254 T1 for orange vest without markings
- Order MV1254 T3 for High-Visibility
- (vest as shown)
- Includes 2'x2' Velcro patch on the left shoulder
- (not pictured)
- MD4030 Inflation - Hammar Auto Hydrostatic Inflator (HIT). Automatically inflates when
- submerged in 4+ inches of water. No accidental inflations due to humidity, rain, wash or spray.
- MD4035 Inflation - Halkey Roberts Manual Inflator. Uses 2x 35g CO2 cylinders.
- Each DTLP contains two inflatable cells made from Radio Frequency (RF) welded, polyurethane
- coated nylon fabric. Both cells incorporate oral inflation tubes to provide a means to reduce
- buoyancy or to top-off or fill each bladder, should failure of the CO2 cylinders occur, or if reduced
- inflation is experienced when operating in cold weather conditions.
- Both come standard with two Kevlar® ballistic pouches (P/N MA4050). In the event a ballistic
- impact ruptures the cylinder the Ballistic Cylinder Containment Pouch safely disperses the force
- of the CO2, and helps prevent the cylinder from becoming a projectile (MD4035FR only) while
- containing dangerous fragments.
- Lightweight. Weighing one pound, it is the smallest, self-righting inflatable LPU for maritime special operations, providing 40 pounds of buoyancy.
- Sleek. The almost invisible, low-profile design allows full field of view, head mobility and does not interfere with users' equipment, while easily connecting to almost any armor carrier.
- Ultimate Control. The exclusive Programmable Automatic Inflator is triggered by water depth, time submerged in water or a combination of both and provides 40 pounds of buoyancy.
- Versatile. Harness accessory allows the device to be used as a stand-alone life vest with no armor carrier. SOLAS retro reflective tape is attached to the bladder via hook and loop, allowing the user to remove it or switch to GLINT tape.
- Colors: Sepia, MultiCam, Coyote Tan and Black
Click here to view Data Sheet
Buy Now on GSA- USCG Approved Type III
- 50 mph dynamic strength tested
- 62 square inch of reflective tape for increased visibility
- Adjustable neoprene wrist cuffs
- 4 front pockets (2 are fleece lined)
- 1 large pocket on the inside of the jacket
- Full-length storm-flap
- Attachment points include a fast-tab on the left chest & webbing tabs on top of the shoulders
- Attachable hood can be purchased separately (MA7136)
- Other versions available: US Navy (MJ6214 NV), ANSI Class 2 (MJ6214 G3), USCG (MJ6214 22)
- Colors: Navy Blue, Orange, Orange/Black, ANSI Yellow-Green/Black (Red & Olive available as a special order)
FEAUTURES:
- Available in two sizes 8 & 10 SCFM:
- Choice of prime mover/drive
- Electric motor, single phase or 3-phase
- Gasoline engine
- Diesel engine (DMT 08)
- Inlet filter
- Stainless steel intercoolers and aftercooler
- High temperature switch (except D drive)
- Vibration isolators
- P31 Purification
- Low oil pressure switch (electric and engine drive with electric start)
- Motor starter with NEMA 4 enclosure
- Hourmeter
- Pressure switch
- Visual CO/moisture indicator
FEATURES:
- BAUER P0 breathing air purification system
- Belt guard designed to meet OSHA guidelines
- Inlet filter
- Vibration isolators
- High temperature switch (G drives)
- 5 foot fill hose assembly with SCUBA yoke
- Bleed valve and pressure gauge
FEATURES:
- BAUER breathing air purification system
- TEFC motor
- NEMA 4 rated electrical enclosure with UL® listed control panel
- Compressor low oil pressure and high temperature safety shutdowns
- Emergency stop push button
- Automatic condensate drain system with non-corrosive condensate reservoir and integrated float switch
- Automatic "Full" indication and compressor shutdown
- Gauge panel
- Lifting lugs integral to unit frame
- Inlet particulate filter and maintenance indicator
- On/Off switch and final pressure switch
- Powder coated aluminum frame and cabinet enclosure
- 316 stainless steel tubing
- Stainless steel fittings, fixtures, and fastening devices
FEATURES:
- BAUER breathing air purification system with SECURUS
- BAUER PLC based controller with multicolor touchpad display
- NEMA 4 rated electrical enclosure with UL® listed control panel
- Hinged fill control panel with Lexan laminate air flow/fill schematic
- Automatic condensate drain system with non-corrosive condensate reservoir and integrated float switch
- Automatic "Full" indication and compressor shutdown
- Two (2) 6000 PSIG UN code stamped air cylinders
- Integral SCBA storage for up to twelve (12) SCBA cylinders
- NFPA 1901 2016 edition compliant 2 position containment fill station accommodates SCBA or SCUBA cylinders up to 31" overall length
- Unique diesel drive system incorporating our exclusive automatic belt tensioning system
- High gloss powder coat paint for a hard durable finish
- Hydraulic surge brakes with breakaway actuator
- Four (4) bank dual function cascade controls with air direction valve
- Formed structural steel frame designed and built by BAUER
- Hypalon® type cover protection for the operations panel and fill station
- Refill port
- CO monitor with calibration kit
- 2" ball hitch
FEATURES:
- BAUER breathing air purification system with SECURUS
- BAUER PLC based controller with multicolor touchpad display
- NEMA 4 rated electrical enclosure with UL® listed control panel
- Compressor low oil pressure and high temperature safety shutdowns
- Emergency stop push button
- Hinged cascade fill control panel with lexan laminate air flow/fill schematic
- Audible alarm on safety shutdowns
- Inlet filter maintenance indicator
- Automatic condensate drain system with non-corrosive condensate reservoir and integrated float sensor.
- Automatic "Full" indication and compressor shutdown
- Two ASME code stamped air cylinders installed in an integral rack designed to hold four cylinders
- Sound attenuating enclosure with slam-action latches and lift-off type hinges
- NFPA 1901 Compliant Three position Containment Fill Station accommodates SCBA or SCUBA cylinders up to 31" overall length
FEATURES:
- Wing hull design creates hydrodynamic lift andcompartmentalizes running surface to reducevacuum, quicker to plane and greater speeds withheavier loads
- Large interior space
- Polyurethane fabric used for longer life and twoto three times the puncture resistance of Hypalonor PVC
- Thermo welded seams for a joint as strong ascontinuous material
- Composite transom; lighter weight and strongerthan aluminum, will not decay like wood
- California made with U.S. materials and BerryAmendment compliant