M2DCON

The CBR Multi-Purpose Wipes™ (CBR-MPW) is a commercial equivalent to the US DoD Joint Service Equipment Wipe (JSEW/M334). The CBR-MPW are for immediate and operational decontamination of chemical and biological contamination. The CBR-MPW are available in two configurations (kits and singles) containing the individually packaged wetted wipe. Configurations: The kit configuration has five wipe packets sealed inside an overpack pouch. The CBR-MPW Kit is configured to be easily carried in a uniform pocket or placed in an emergency response bag. The box configuration is sold in carton of 500 single wipe packets. The CBR- MPW carton of singles allow ease of use in the field by teams and can be stored in vehicles (ambulances, police cars, etc.) or used in mass response situations. Applications: Use CBR-MPW for immediate and operational decontamination of hard surfaces, military and first responder equipment. The wipe with a unique chemistry has been extensively tested by the US Department of Defense and demonstrated to neutralize against chemical (nerve, blister and other agents of concern) and biological (bacteria, viruses and spores) contamination. The chemistry used on the CBR-MPW is skin safe and can be used for personal hygiene. Compare to JSEW/M334 CeBeR™ Multi-Purpose Wipe.

The COMIT (COntainment MITigation) Kit combines the best in class decontamination technologies. It provides easy and immediate decon capabilities that allow you to continue on a mission and achieve objectives. The kit can be customized to meet the unique operational needs of the user. The kit includes Instructional Flowchart, Decon PLUS™ (JGPD/M333) - 18oz kit, Tactical Sprayer. CBR Multi-Purpose Wipes™ (JSEW/M334), DCON Mitt™ (All-hazard microfiber), Leatherman Raptor Shears, Benchmade 8-Hook, Disposal Bags. Field Forward COMIT Kit meets the immediate chemical and biological decontamination needs for 2-4 service persons. The kit is 100% Made in the USA and Berry Amendment Compliant.

The DCON Mitt combines the effectiveness of microfiber with the protection of a chemical barrier to protect the user. Microfiber has been utilized for decades for its ability to efficiently remove liquids, dirt, oils, and even germs from surfaces. Microfiber is composed of a blend of polyester and polyamide fibers. These fibers are woven into smaller "splits," which are many times smaller than human hair. Splits give microfiber the ability to conform to surfaces and penetrate small cracks and crevasses on surfaces, which provides a superior ability to remove liquids and droplets when compared to other absorbent materials like cotton cloths, paper towels, or plain polyester fabric alone. Microfiber's split construction also provides a greater surface area in which liquids can be absorbed. In fact, microfiber can absorb 7-8 times its weight in liquids as compared to other materials. The fiber splits, either dry or slightly moistened with water, generate an attractive charge that helps entrap small solid particles and germs. This effect reduces cross-contamination and lessens the chance of resuspending the contaminant and creating an airborne hazard. Microfiber has been tested, for physical removal of Chemical Warfare Agent liquids, by the US Army's Combat Capabilities Development Command Ð Chemical Biological Center (formerly ECBC) and the UK Defense Science and Technology Laboratory (DSTL) and has proven highly effective for immediate decontamination. In addition, Microfiber has been tested by a large number of university and national laboratories and found to be a material for the removal of biological pathogens from surfaces, when used in conjunction with liquid biocidal decontaminants. The DCON Mitt can be used in combination with M2DCON's Fuller's Earth and Decon PLUS™. The DCON Mitt is 100% Made in the USA and Berry Amendment Compliant.

Decon PLUS is the commercial equivalent to the U.S. DoD Joint General Purpose Decontaminant (M333). This three-part system is a complete decontamination kit for use against chemical and biological contamination.

Configuration: Each Decon PLUS kit includes three pouches of unique chemistry packaged laminated foil pouches. The decontaminant is stored as dry powders which are mixed at point of use with locally available water (fresh, brackish or salt water). Decon PLUS is easy to use. Simply mix with available water, apply to completely wet contaminated surfaces, then allow to dry completely. Once mixed, Decon PLUS can be applied to surfaces or equipment manually or using spray systems.

Application: When the Part 1 Oxidant component is dissolved in water, it releases hydrogen peroxide. The Part 2 Activator component contains materials that react with the hydrogen peroxide to produce peracetic acid (PAA). The activator also contains a blend of surfactants and a buffer to control the pH of the use dilution. The Part B Bio Activator component is added if the use dilution will be used for decontamination of biological agents. This component boosts the PAA concentration and adjusts the pH to enhance the antimicrobial efficacy.