Toll-Free: 866.936.3890
Filters
$0.00
NIJ 06 certified Level III Stand Alone multi-curve vest insert.
FEATURING:
FEATURING:
- Bullet resistant plate
- Level III protection at 2.55 lbs in a 10" W x 12" L size
- Manufactured from ultra-high molecular weight polyethylene
- Finished in a black Line-X coating
$0.00
The BANG 3 Day Tactical pack is the next step in the operator proven packs from High Ground. If you're looking for a simple 3-Day packed stacked with end user features, the BANG pack is your answer, period. It features 500D construction with our "cable routing" shoulder straps, stowable/removable waist belt, air-mesh back padding and side expandable water bottle pockets.
Medium-sized patrol pack, outfitted to carry three days plus days worth of gear, MRE's, clothing, etc.
500DMILSPECCordura®construction
3Pocket/stowage pockets
2.75"x3.75" hook and hoop ID panel.
1/2" Volura® adjustable padded shoulder straps
Cable routing zippered shoulder straps
Modular attachment points on front of pack
Front accessory pocket
Heavy Duty reinforced drag/carry handle
1" Sternum strap
Stowable, removable padded waistbelt
Dual expandable water bottle pockets
Single side compression straps
Airmeshbackpaddingby1/4"Volura®foam
Interior hydration pocket with exterior access flap
1/2"grommet drain holes in bottom of pack Overall Dimensions (Approx.): Main Compartment 1: 20L x 14W x 6.5H, Front Compartment 2: 19L x 14W x 4H Outside Compartment 3: 11L" x 11W" x 2H" 2060 CI / 35L. Weight: 2.7 lbs.
Medium-sized patrol pack, outfitted to carry three days plus days worth of gear, MRE's, clothing, etc.
500DMILSPECCordura®construction
3Pocket/stowage pockets
2.75"x3.75" hook and hoop ID panel.
1/2" Volura® adjustable padded shoulder straps
Cable routing zippered shoulder straps
Modular attachment points on front of pack
Front accessory pocket
Heavy Duty reinforced drag/carry handle
1" Sternum strap
Stowable, removable padded waistbelt
Dual expandable water bottle pockets
Single side compression straps
Airmeshbackpaddingby1/4"Volura®foam
Interior hydration pocket with exterior access flap
1/2"grommet drain holes in bottom of pack Overall Dimensions (Approx.): Main Compartment 1: 20L x 14W x 6.5H, Front Compartment 2: 19L x 14W x 4H Outside Compartment 3: 11L" x 11W" x 2H" 2060 CI / 35L. Weight: 2.7 lbs.
$0.00
The Enhanced Load Out Bag from High Ground is the newest addition to our already industry proven load out bags/packs line. With over 8400 cu. inches of storage it has plenty of room for any mission at hand. It also features our HEAVY DUTY "off-road" style wheels for durability and ease across any terrain. The interior of the bag features 2 sets of tie down straps, a 50/50 divider that will keep all your gear safe/secure and 5 separate mesh lining pockets. On the exterior it features our HG braided handle, reach through flap along with 3 exterior zippered pouches for quick access.
FEATURES
Flexible/Stowable Braided Handle
Easy top access flap accessible in vertical position.
Heavy Duty "Off Road" Style Wheels.
Small front pocket for fast access items.
2" expandable luggage area.
Full open interior flap, no more "U" shaped opening/closing the corners of your bag.
Two levels of gear straps to hold interior items secure.
5 mesh interior pockets
3 Exterior Quick Access Pouches
1000 Denier material
40.25" Length x 15" Width x 14" Height (plus 2"
Expansion pocket)
8400+ cu. Inches
Made in the USA
LIFETIME Warranty
FEATURES
Flexible/Stowable Braided Handle
Easy top access flap accessible in vertical position.
Heavy Duty "Off Road" Style Wheels.
Small front pocket for fast access items.
2" expandable luggage area.
Full open interior flap, no more "U" shaped opening/closing the corners of your bag.
Two levels of gear straps to hold interior items secure.
5 mesh interior pockets
3 Exterior Quick Access Pouches
1000 Denier material
40.25" Length x 15" Width x 14" Height (plus 2"
Expansion pocket)
8400+ cu. Inches
Made in the USA
LIFETIME Warranty
$0.00
The new standard-issue packs for USSOCOM, our line of SPEAR packs feature lightweight, full carbon frames, Dyneema-CORDURA® laminate, IR-compliant zippers and lightweight bolsters. The SPEAR ASSAULT pack is a 3200 cu-in, top-loading pack bag with two external pockets that each have internal, mesh pockets. The pack has full-length zippers on each side for fast access to the main compartment and a rain fly pouch on the bottom.
- 500D CORDURA® fabric and YKK® zippers
- Futura Yoke provides adjustment for differing torso lengths
- Zipper port for radio and antennae access
- Internal, removable radio harness
- Top-loading access has a spindrift collar
- Removable lid pocket
- Full-length zippers on each side
- Weight: 6.3 lbs (2.8 kg)
- Volume: 3200 cu-in (53 L)
$0.00
The KOMODO DRAGON is a slightly larger version of our 3 Day Assault for extended time in the field. The KOMODO DRAGON uses the Futura yoke to adjust to different torso lengths and accommodate the extra girth of armor. Inside, it has a MOLLE panel for radio mounts plus detail pockets and hydration sleeves. The waist belt stows away when not in use.
- 500D CORDURA® fabric and YKK® zippers
- 3-ZIP design for quick access
- Three rows of MOLLE on front panels
- VELCRO® on lid for identification and patches
- Radio inputs, outputs and antennas route easily through the three urethane coated zippered ports
- Water bottle pockets keep hydration handy
- Double-layered bottom for long-haul durability
- Bolstered Ventilation and Stability (BVS) system increases stability of the pack over armor
- Waist belt stows away when not in use
- Futura Yoke provides rapid adjustment for differing torso lengths
- Weight: 4.8 lbs (2.2 kg)
- Volume: 2000 cu-in (33 L)
$0.00
The OVERLOAD features our quick-access 3-ZIP design and the ability to secure sniper and crew-served weapons or Pelican cases between the pack and frame without decreasing capacity for mission essentials or sustainment gear.
- 500D CORDURA® fabric and YKK® zippers
- 3-ZIP design for quick access
- NICE Frame for comfort and stability under the heaviest loads
- Bolstered Ventilation and Stability (BVS) system increases stability of the pack over armor
- Overload feature allows for securing of a rifle or mortar between the frame and the bag with color
- coordinated buckles on weapon compression strap
- Grippy, high-abrasion neoprene on the Overload™ feature to stabilize rifle or mortar
- Two internal sleeves each accommodate water bladders up to 3L each
- MOLLE on interior body panel for attaching accessories
- Port at top of body panel opens from either side for antennae, cables, and/or hydration
- Two zippered pockets on lid for keeping small items accessible
- Velcro on lid for identification and patches
- MOLLE on waist belt and exterior for attaching accessories
- 2' waist belt
- Side water bottle pockets
- Futura Yoke provides rapid adjustment for differing torso lengths
- Weight: 7.9 lbs (3.6 kg)
- Volume: 3000 cu-in (50 L)
$0.00
Blue Force Gear revolutionized the rifle sling industry when we introduced our famous Vickers Sling captured tail design. The GMT sling addresses the deficiencies found in legacy designs for those who prefer a tail sling. A major advantage here compared to other slings is having a wider range of adjustability in size on this 2-point sling.
- BFG Sling Colors: Black, Coyote Brown, Multicam, Ranger Green, Wolf Gray and more colors upon request.
- 2 point sling: Yes
- Single Point Sling: Yes (with correct hardware)
- Common Sling Mounts: XM5, M16 (M16A2 / A3 / A4), HK, M27 and other AR / Rifle Sling Use
- Other suggested weapon sling use: tactical shotgun to sniper rifle
- Sling Length: 34" - 64"
- GMT Sling Webbing Size: 1-inch and 1.25"
- Webbing Material: Invista solution dyed CORDURA® webbing
- Hardware Built: Nylon hardware (glass reinforced DuPont Zytel® Nylon)
$0.00
The Blue Force Gear CHLK® and GRIDª Belt is based on a two-belt inner/outer battle belt system and features laser-cut MOLLE fields for attaching holsters and other gear. The CHLK Belt (Verions with the Tether Points) has a load-rated buckle, ANSI spec Dyneema®-nylon hybrid webbing, and two external tether attachment points. The CHLK Belt is purpose-built to allow commandos to snap securely into helicopters while performing INFIL/EXFIL and during time of flight. The GRIDª Belt is an excellent duty belt for most military, police, and law enforcement personnel.
- BFG Battle Belt Colors: Black, Coyote Brown, Multicam, Ranger Green, Wolf Gray and more colors upon request.
- Tether Attachment: Optional (CHLK = Tether | GRID = No Tether)
- MOLLE Fields: 3x22 to 3x30 depending on size
- Fits Waist/Hips: 28 to 48-inches
$0.00
The Blue Force Gear Trauma Kit NOW! - MEDIUM is an emergency access Trauma Kit that can be deployed with one hand in seconds. The TKN!-MEDIUM was originally designed to hold the contents of the Army IFAK but can be configured to almost any emergency medical loadout. This is a medium trauma kit for those users that need to carry specific full-size medical items, a smaller trauma kit, the Micro Trauma Kit NOW! is available.
Advanced Medical Fill Supplies include:
Trauma Gloves (Rolled 1x Pair), QuikClot Combat Gauze (1x green), Emergency Trauma Dressing 6Ó (1x), Hypothermia Blanket (1x) Flat Fold Tape (1x), Compressed Gauze (1x), Trauma Shears (1x), Full Size Chest Seal (1x Twin Pack), Nasopharyngeal Airway (1x), and Decompression Needle (1x)
Pro Medical Supplies included:
Trauma Gloves (Rolled 1x Pair), QuikClot Combat Gauze LE (1x black), Emergency Trauma Dressing 6Ó (1x), Hypothermia Blanket (1x) Flat Fold Tape (1x), Compressed Gauze (1x), Trauma Shears (1x), and Full Size Chest Seal (1x Twin Pack)
Essentials Medical Supplies included:
Trauma Gloves (Rolled 1x Pair), QuikClot Bleeding Control Dressing (1x white), Emergency Trauma Dressing 6Ó (1x), Hypothermia Blanket (1x) Flat Fold Tape (1x), Compressed Gauze (1x), and a Pressure Device (1x)
Advanced Medical Fill Supplies include:
Trauma Gloves (Rolled 1x Pair), QuikClot Combat Gauze (1x green), Emergency Trauma Dressing 6Ó (1x), Hypothermia Blanket (1x) Flat Fold Tape (1x), Compressed Gauze (1x), Trauma Shears (1x), Full Size Chest Seal (1x Twin Pack), Nasopharyngeal Airway (1x), and Decompression Needle (1x)
Pro Medical Supplies included:
Trauma Gloves (Rolled 1x Pair), QuikClot Combat Gauze LE (1x black), Emergency Trauma Dressing 6Ó (1x), Hypothermia Blanket (1x) Flat Fold Tape (1x), Compressed Gauze (1x), Trauma Shears (1x), and Full Size Chest Seal (1x Twin Pack)
Essentials Medical Supplies included:
Trauma Gloves (Rolled 1x Pair), QuikClot Bleeding Control Dressing (1x white), Emergency Trauma Dressing 6Ó (1x), Hypothermia Blanket (1x) Flat Fold Tape (1x), Compressed Gauze (1x), and a Pressure Device (1x)
- BFG Med Pouch Colors: Black, Coyote Brown, Multicam, Ranger Green, Wolf Gray and more colors upon request.
- Use: Trauma Kit / IFAK (Individual First Aid Kit)
- Pouch Mounting: MOLLE
- Medic Pouch Identifier: Yes (removable for low profile needs)
- Size: 2.5" x 4.5" x 7"
- Additional Sizes: Yes - Nano, Micro, Plus+, Small and Large.
- Tourniquet Holder: yes, accessory compatible
$0.00
- Full overlapping side coverage for complete protection
- Integrated 10' x 12' front and rear plate pockets
- Fully adjustable internal and external cummerbund for secure fit
- Padded shoulders with overlapping protection against additional threats
- Non-metallic fastener system preventing secondary projectile threats
- Integrated ambidextrous gas mask D-Ring retainers
- Heavy duty drag strap with hook and loop handle hold down to prevent snagging
- Size: Small - 3X-Large
- Color: Black, Olive Drab, Coyote, Brown, Desert, ACU, Navy
- Armor: Phoenix, Paragon, HML3000 IIIA
$0.00
The Gen II Premium Concealable Carrier with level IIIA CLW ballistics is a lightweight, breathable and water-repellant carrier.
FEATURES:- Side opening design
- Lightweight, breathable, and water-repellant carrier
- Moisture-wicking, anti-microbial inner mesh liner
- 4 point adjustable strapping system
- Low profile loop
- Hidden zipper closure for comfort
- Available in the following colors: Black, Tan, Navy, White
- CLWIIIA Ballistics are certified to level IIIA NIJ 0101.06 standards
$0.00
The TASK IV Active Shooter Kit Includes one lightweight plate carrier, one 4S17 shooter cut 10x12 level IV front plate and one 4S17 full-cut 10x12 level IV backplate.
FEATURES:- Lightweight MOLLE plate carrier with emergency drag handle, quick-release buckles, and easy access plate pockets
- Adjustable sizing from 32'-54'
- NIJ 0101.06 Certified level IV Plates with a 10-year warranty
- DEA Hard Armor Protocol Compliant
- Rifle Special Threats Validated
- NIJ 0101.06 Certified level IV Plates with 10-year warranty
$0.00
- Made of 1 34' webbing
- Heavy duty friction buckle
- Extraction/lanyard reinforced tubular loop
- Weight: 0.48 LBS
- Color: Black, Coyote Brown, Coyote Tan, Olive Drab
- Size: M (32' - 37'), L (38' - 43')
$0.00
This new suit uses a more advanced impact reduction material called Poron, which protects against harder blows allowing you to go 100%, while preventing injuries. Furthermore, the new helmet is a game changer - SIM ready out of the box, and the visor lifts up and out to allow more air flow preventing the end user from having to remove the helmet as scenarios change. There are also multiple panels that can attach to the suit, allowing full versatility in multiple scenario training.
Each kit includes:
Each kit includes:
- Adaptiv Helmet (x1)
- Throat Guard (x1)
- Torso Protector (x1)
- Padded Shorts (x1)
- Elbow/Ulna Pads (x2)
- Knee/Shin Pads (x2)
- Combat Gloves (x2)
$0.00
Revolutionary system created to significantly reduce back strain and fatigue.
- Created after 2.5 years of research and development, testing and evaluation.
- Combat tested in theater.
- Redistributes weight to waist and hips reducing fatigue.
- Perfect for long-periods of time, in a vehicle, standing or marching.
- Made of a transparent, UV-stabilized, Polycarbonate plastic for durability
- Weight: 2.5 lbs.
- Can be retrofitted with older models.
- Armor not included.
- Designed for LBT-6094 series only.
- Size: Short (up to 67''), Regular (67'' to 71''), Long (71'' to 75'')
$0.00
- Reinforced carrying handles
- Paddled backpack straps and waist strap
- Optional straps at top for body armor or a load bearing vest
- Modular panel with concealed pocket underneath
- Four removable zippered mesh pouches
- Two small mesh pockets
- Large mesh pocket on back
- Dual accessible bottom pocket for IV solutions
- Quick ID zipper pulls in red para-cord
- Exterior MOLLE attachment points on all sides
- 3"x2" loop identifiers on exterior
$0.00
ADAPTIV gear allows the end user to train at real speeds in a multitude of environments. Its injury-prevention/impact-reduction system enhances training performance by allowing operators to realistically practice proper detainee handling, shoot/don't shoot drills with approved marking cartridges, and other close-quarters combat skills. Since military and law enforcement are encouraged to use less-than-lethal force whenever possible, this kind of training is more necessary than ever. That's why we developed the most advanced, made in America fight suit on the market.
The ADAPTIV kit includes all components needed to support any combative program. The Kit can be customized to individual customer needs. ItÕs the only Berry Compliant Fight Gear on the market.- ADAPTIV Helmet
- Elbow /Ulna Pads
- Combat Gloves
- Padded Shorts
- Torso Protector
- Throat Guard
- Boxing Gloves
- Knee/Shin Pads
$0.00
- Extremely durable lightweight laser cut squadron(laminate nylon)
- Removable Tegris-backed modular wings for radio pouches
- Quick-adjust waist strap and adjustable shoulder straps
- Modular chest dashboard for mobile comm devices or navigation boards
$0.00
- 6/12 Laser Cut Platforms
- Tubes Rapid Release Technology
- Instant Adjust Back Panel
- Adaptive Cummerbund
$0.00
- Urethane covered nylon
- Superior strength and weather resistance
- Tempered non-slip coating
- Impervious to sweat and water
The line one belt is our most popular everyday belt! Borrowing its name from an old NSW term for the first level of clothing or gear, the Line One Belt has amazing tactical performance that maintains the high level of comfort and mobility usually associated with leather. Urethane covered nylon provides superior strength and weather-resistance. This belt won't crack, peel, or become stiff in frigid temperatures. Specially tempered, non-slip coating eliminates "break-in" time and allows for leather like flex, yet it is impervious to sweat and water and will not stretch or lose its original shape. The Line One Belt is an excellent platform for concealed carry or for just keeping your pants up with style!
- Superior strength and weather resistance
- Tempered non-slip coating
- Impervious to sweat and water
The line one belt is our most popular everyday belt! Borrowing its name from an old NSW term for the first level of clothing or gear, the Line One Belt has amazing tactical performance that maintains the high level of comfort and mobility usually associated with leather. Urethane covered nylon provides superior strength and weather-resistance. This belt won't crack, peel, or become stiff in frigid temperatures. Specially tempered, non-slip coating eliminates "break-in" time and allows for leather like flex, yet it is impervious to sweat and water and will not stretch or lose its original shape. The Line One Belt is an excellent platform for concealed carry or for just keeping your pants up with style!
$0.00
- 100% Berry Compliant "Roper" Cow Leather
- Double Layered
- Firmer grain/external texture on the grain of the leather
- Softer texture on internal side
The Fast Rope Mitt (FRM) is designed to be a minimalist, lightweight glove that can easily be transported on the Professional User and available for Fast Rope Insertion. The FRM can be used with or without the FirstSpear - Operator Glove (OG) and is constructed using the best in abrasion resistant and heat mitigating fiber materials.
It's cut and assembled to fold flat for transport in a typical Uniform Pocket; the FRM is low bulk and supports Short, Medium or Extended Fast Rope Insertions up to 90 Feet (27.4 Meters). Additionally, the FRM has an advanced two finger pattern that allows the User to rapidly expose his trigger finger to engage a firearm, this method is far faster than actually taking off a glove during extreme situations, the FRM can be pulled partially off and retained around the wrist by the second elastic strap across the back until time has become available to secure in through the reinforced retention loop at the cuff.
This glove is 100% Berry Compliant featuring all American "roper" cow leather and ultra-high performance Kovenex providing greatly enhanced cut, tear, and thermal resistance for Fast Rope Insertions. It's ultra soft on the hand and double layered in key points with a firmer grain and texture on the exterior of the palm. Reinforced button holes allow for quick and easy carabiner or snap hook attachment.
- Double Layered
- Firmer grain/external texture on the grain of the leather
- Softer texture on internal side
The Fast Rope Mitt (FRM) is designed to be a minimalist, lightweight glove that can easily be transported on the Professional User and available for Fast Rope Insertion. The FRM can be used with or without the FirstSpear - Operator Glove (OG) and is constructed using the best in abrasion resistant and heat mitigating fiber materials.
It's cut and assembled to fold flat for transport in a typical Uniform Pocket; the FRM is low bulk and supports Short, Medium or Extended Fast Rope Insertions up to 90 Feet (27.4 Meters). Additionally, the FRM has an advanced two finger pattern that allows the User to rapidly expose his trigger finger to engage a firearm, this method is far faster than actually taking off a glove during extreme situations, the FRM can be pulled partially off and retained around the wrist by the second elastic strap across the back until time has become available to secure in through the reinforced retention loop at the cuff.
This glove is 100% Berry Compliant featuring all American "roper" cow leather and ultra-high performance Kovenex providing greatly enhanced cut, tear, and thermal resistance for Fast Rope Insertions. It's ultra soft on the hand and double layered in key points with a firmer grain and texture on the exterior of the palm. Reinforced button holes allow for quick and easy carabiner or snap hook attachment.
$0.00
FEATURES:
- Poly mesh for increased ventilation
- Exceptional load carriage & comfort
- Jungle Mesh Yoke accepts our complete line of Assaulter's Zip-On Platforms and also holds a 50 oz. hydration bladder
- Engineered utilizing patented PV® material
- Yoke Sizing: Small/Medium & Large/XLarge
- Belt Sizing: Small-2XLarge
Products advertised for marketing purposes on this site may contain chemicals known to the State of California to cause cancer or reproductive harm. See –