Atlantic Signal designed, developed and manufactured General Aviation ICS cable assembly Originally developed in 2011 with the assistance of the Federal Bureau of Investigation Special Operations teams. This cable is traditionally used by non-DOD clients utilizing air assets. The custom circuitry, developed by Atlantic Signal, inside the over-molded Nexus connector - reads the ICS impedance levels and adjusts the headsets' performance accordingly The housing shown in the photo depicts the larger than average over-sleeve surrounding the Nexus plug - this contains the custom General Aviation asset compatible circuitry The plug and play design of the Atlantic Signal General Aviation ICS cable - allows an operator to stow the cable when not in use. When connected to the appropriate PTT housing, the custom over-molded connector stands at a 60 degree angle for ease of access with a gloved thumb and forefinger. Further, when connected to a PTT box, the connector is angled 45 degrees in toward the body armor for a tight fit nan nan nan

Atlantic Signal designed, developed and manufactured two pin to two pin 02 mask cable Our custom built 02 cable features the two pin connectors over-molded into a 90 degree angle on both ends - this reduces undue strain and stress on each cable / connector end when connected to the headset and mask nan nan nan nan nan

Atlantic Signal Motorola XTS coiled radio cable assembly Our third most popular Law Enforcement connector assembly - the Motorola XTS. Atlantic Signal interfaces to over 100 LE and Military radios worldwide Bottom, back view of the Motorola XTS connector depicting radio edge clip assembly Twin Motorola XTS coiled cable connector assemblies interfaced to our dual comm "SF" model push-to-talk. We offer all of our radio connectors in both plug & play and hard-wired versions

Atlantic Signal Motorola APX coiled radio cable assembly Our most popular Motorola connector assembly for Law Enforcement portable radios - the APX. Atlantic Signal interfaces to over 100 LE and Military radios worldwide Side profile of APX connector with knurled radio connection screw Atlantic Signal Motorola APX coiled cable assembly interfaced to our INVICTUS single comm push-to-talk assembly. We offer all radio connectors in both plug & play and hard-wired versions

Atlantic Signal THALES PRC-148R maritime cabled radio connector assembly Atlantic Signal designed, developed and manufactures the over-mold assembly of the maritime PRC-148 radio connector. The long "bullet-style" over-mold provides ample room for soldering of individual wires while adding extra strength and support for the cable assembly. Atlantic Signal interfaces to over 100 LE and Military radios worldwide In house wiring and over-mold control quickens delivery to customers versus waiting for the connector supplier to perform those tasks Shown - our D Series PRC-148 R maritime plug & play cable assembly designed and built initially for Naval Special Warfare's DOMINATOR II comms suites. We can also build the assembly hard wired to any and all of our other push-to-talk options nan nan nan

Atlantic Signal Harris 117 / 152 and Thales 148 cabled radio connector assembly Atlantic Signal designed, developed and manufactures the over-mold assembly of the PRC 6-pin radio connector. The long "bullet-style" over-mold provides ample room for soldering of individual wires while adding extra strength and support for the cable assembly. Further, it prevents dust, dirt and water ingress. Atlantic Signal interfaces to over 100 LE and Military radios worldwide In house wiring and over-mold control quickens delivery to customers versus waiting for the connector supplier to perform those tasks Shown - our D Series 6 pin plug & play cable assembly designed and built initially for the FBI's Special Operations Unit's Warrior comms suites. We can also build the assembly hard wired to any and all of our other push-to-talk options nan nan nan

Atlantic Signal HARRIS PRC-163 dual band cabled radio connector assembly Atlantic Signal designed, developed and began manufacturing the PRC-163 nineteen pin Nemesis connector assembly in the Winter of 2017. Atlantic Signal interfaces to over 100 LE and Military radios worldwide This is the D Series PRC-163 Over-molded Radio Connector terminated at the opposite end with our custom designed 60 degree plug and play connector for our VIPER Series PTTs Twin Atlantic Signal PRC 163 Connectors without EUD Hard-Wired Atlantic Signal Invictus Push-to-Talk with our dual band PRC 163 connector with EUD Close up of the Atlantic Signal custom designed PRC 163 19 pin cabled connector with EUD Atlantic Signal custom designed EUD connector with adjustable rubber strap for keeping in place when not in use

The Through Wall Camera (TWC) is a precision surveillance camera that enables operators to gain covert visual access to rooms and areas through drywall or any small opening. The TWC can be deployed in multiple scenarios. Gain covert visual access by inserting the camera probe under door cracks or through narrow gaps in walls or structures.

The TWC includes a set of three tools: a Wall Punch, a Clearing Drill, and a Camera Probe that is an ultra-miniature camera housed in a 2mm stainless steel probe. The TWC tools are designed to bore a 2mm hole through two layers of drywall and make discreet entry into adjacent rooms. First, embed the Wall Punch into the drywall and use the Clearing Drill to bore a hole through the wall and into the adjacent room. Remove the Clearing Drill from the Wall Punch and insert the Camera Probe, where it magnetically attaches, to discretely obtain a wide angle view of the room.

Two length options are available, the standard length option is 8 inches long and designed for deployment in residential properties. The longer version is 17 inches long and suited for wider wall construction typically found in commercial buildings.

The SYNC Under Door Camera is enhanced with upgraded optics, improved circuitry, and reinforced housings to deliver operators real-time video with an expanded field of view and unmatched clarity in extremely low-light environments.

The SYNC Under Door Camera gives you rapid visual access into rooms or around corners. Featuring two individual cameras located within a 6.6mm/0.260" thick insertion panel, the SYNC UDC provides both forward and upward camera views.

Each camera view is supplemented with covert 950nm Infrared LED illumination for low-light and no-light applications. Simply plug the SYNC Under Door Camera into any Android tablet or mobile device to view video on the TE View App.

Measuring less than 2" wide and 7" long the SYNC Under Door Camera can be easily stowed in a cargo pocket for quick deployment.

The EMC 200 RFL is a .68 caliber less-lethal launcher designed for accuracy, range, and ease of operation. Its rifle configuration features a 14-inch rifled barrel and familiar M4-style chassis, providing operators with a stable and intuitive platform for training and field deployment.

Powered by High Pressure Air (HPA), the EMC 200 RFL delivers consistent performance with an effective point-target range of 50 yards and an area range of up to 100 yards. A 20-round magazine and approximately 160-round air capacity provide sustained operational capability without frequent magazine or air-system changes.

The RFL is optimized for use with PavaShot ERA-50 projectiles for maximum accuracy, reliability, and overall system performance.

EMC 200 RFL Key Features

• .68 Caliber
  
• 14" Rifled Barrel
  
• 4.82 lbs
  
• 33" Overall Length
  
• 50-Yard Point-Target Range
  
• 100-Yard Area Range
  
• 20-Round Magazine Capacity
  
• 160-Round Air Capacity
  
• High Pressure Air (HPA)
  
• Optimized for ERA-50 Projectiles
  

Link: EMC 200 | Semi-Auto .68 Cal Launcher | Pavashot

The EMC 200 CQB is a compact .68 caliber less-lethal launcher designed for close-quarters operations, crowd-control applications, and environments where maneuverability is essential.

Its 12-inch barrel, compact overall length, and lightweight M4-style chassis provide operators with a familiar and easy-to-handle platform while maintaining the accuracy and reliability required for professional use.

Powered by High Pressure Air (HPA), the EMC 200 CQB provides an effective point-target range of 33 yards and an area range of up to 66 yards. A 20-round magazine and approximately 160-round air capacity provide sustained capability in a compact 31-inch, 4.75-pound package.

The CQB is optimized for use with PavaShot ERA-50 projectiles for consistent accuracy, reliability, and overall system performance.

EMC 200 CQB Key Features

• .68 Caliber
  
• 12" Barrel
  
• 4.75 lbs
  
• 31" Overall Length
  
• 33-Yard Point-Target Range
  
• 66-Yard Area Range
  
• 20-Round Magazine Capacity
  
• 160-Round Air Capacity
  
• High Pressure Air (HPA)
  
• Optimized for ERA-50 Projectiles
  

Link: EMC 200 | Semi-Auto .68 Cal Launcher | Pavashot

Tool Set for AN/AVS-6/9

AERONOX® Mount, TSO, Black

The Micro3x magnifier is made for quick, close-quarters transitions and is ready to go right out of the box. Compact and lightweight, it offers fast target acquisition at point-blank range while giving you the magnification needed to extend your effective range. Whether you're running drills or maneuvering tight spaces, it's designed to boost situational awareness and keep you quick on your feet without sacrificing accuracy.

The Micro3x Magnifier will work with any of our red dots. The Micro3x will not work with prism scopes.

The Solo® R/T monocular delivers tactical precision in a light, compact package. With an MRAD milling reticle for quick range estimation, it's built for tactical shooters and hunters who strip their gear down to the essentials. Maximum power in minimal weight, so you can stay sharp at every moment of truth.

The Tarsier Eclipse ™ is the most advanced Night Vision Goggle (NVG) accessory on the market, allowing the operator to see objects from 3" to infinity at the same time and without loss of clarity. It incorporates a smooth action and a high-performance optical iris that can quickly be adjusted depending on the amount of ambient light. Additionally, the Tarsier Eclipse ™ offers a high-quality Gorilla Glass sacrificial lens that can quickly be replaced without tools. The sacrificial lens serves as a critical piece of protection for your NVG lenses, shielding them from dust, dirt, or scratching that may cause expensive repairs and potential downtime.

EOTECH's super short line of Vudu® optics now offers a First Focal Plane 4-12x36. The housing is constructed of aircraft-grade aluminum to be compact, lightweight and incredibly durable. At only 7.1", this scope is fog, water, and shock resistant. The turrets are capped and offer 0.1 MRAD adjustments. A rotary dial provides an illuminated reticle with 10 brightness settings and the CR2032 battery provides roughly 300 hours of operation. The unique design provides an integrated base that is also compatible with most aftermarket mini-ACOG mounts. For those wanting a non-magnified solution, EOTECH offers two packages that include a ring mount and EFLX™ that can be mounted to the front tube section at 12 o'clock or 45 degree positions.

Pick up a Mark 5HD™ 3.6-18x44mm and you'll feel the difference. It's up to 20 ounces lighter than other riflescopes in its class, giving you an advantage in the field or at the range. The versatile 3.6-18x magnification range helps you engage close targets, while also giving you the flexibility to reach out to long distances. With three revolutions of elevation adjustment and multiple reticle options, this scope will max out the performance of the latest long-range rifles and ammunition, guaranteed.

Built around Leupold's Professional-Grade Optical System, the Mark 5HD offers unmatched light transmission that's designed to outperform in the most challenging lighting conditions. Its industry leading glare reduction provides a clear image in harsh, direct light, while the resolution and clarity will meet the demands of any professional guide or shooter. Ergonomically designed with more tactile and audible click adjustments, larger numbers, and a high-speed throw lever, the Mark 5HD is built to put accurate fire downrange faster.

The unique combination of features, durability, and professional-grade optical performance guarantees that the Mark 5HD can handle any challenge you throw at it. It's 100% waterproof and fogproof, and like all Leupold® riflescopes, it's designed, machined, and assembled in the USA and guaranteed to perform.

The Mark 5HD™ 7-35x56mm riflescope gives you the extra magnification you need to take advantage of the distances that modern precision rifles can shoot. With the right glass, no target is out of reach. And with the same dimensions and only 3 more ounces than its 5-25x56mm counterpart, you don't have to pay a weight penalty for the extra magnification.

Built around Leupold's Professional-Grade Optical System, the Mark 5HD 7-35x offers unmatched light transmission that's designed to outperform in the most challenging lighting conditions. Its industry leading glare reduction provides a clear image in harsh, direct light, while the resolution and clarity will meet the demands of any professional guide or shooter in the field.

Get behind the Mark 5HD and you'll see the difference. From the superior edge-to-edge clarity and extreme low-light performance to the versatility of its multiple reticle options, this rugged scope will give you an advantage at the range or in the field. With three revolutions of elevation adjustment, the Mark 5HD was built to max out the performance of the latest long-range rifles and ammo. It's ergonomically designed with more tactile, audible click adjustments, larger numbers, and a high-speed throw lever, so you can put accurate fire downrange faster.

Its unique combination of features, durability, and professional-grade optical performance guarantees that the Mark 5HD can handle any challenge you throw at it. It's 100% waterproof and fogproof, and like all Leupold® riflescopes, it's designed, machined, and assembled in the USA and guaranteed to perform .

The Rail-mounted Aiming and Illumination Laser (RAIL) provides visible and IR targeting capability in a compact SWaP-optimized design. brings a weapon-mounted aiming and illumination capability to the user in an exceptionally small form factor. The RAIL contains an integrated visible aiming laser (Green or Red), NIR aiming laser, NIR illumination laser (VCSEL), and 180° NIR wide-angle LED illuminator for confined spaces or Close Quarters Battle (CQB). The NIR illumination laser has a quick adjust beam divergence capability and is independently adjustable from the co-aligned aiming lasers. All lasers have user-adjustable power settings to support various mission needs. The system is powered by a single CR123 battery and mounts to a standard MIL-STD-1913 rail.