Toll-Free: 866.936.3890
Filters
$0.00
The CrewBoss Interface Coat is ideal for the urban firefighter. Its unique cut provides superior thermal protection while allowing for an enhanced range of motion. With its full-cut design and caped shoulders, the Interface Coat provides the firefighter with a functional and comfortable fit.
Functionality is key on the fire line and the CrewBoss Interface Coat really delivers. With unidirectional front cargo pockets that conceal hand warmers, a large interior storage pocket and a radio pocket with a microphone tab, the Interface Coat makes life on the fire line simple with plenty of storage for extra gear.
- Certified to current NFPA 1977 Standards
- Full zippered front closure with #10 brass zipper mounted on Nomex® tape.
- Caped shoulder design with built-in ease for full freedom of movement.
- Gusseted cuff with hook and loop closure for adjustment.
- Alpine-style collar.
- Radio pocket with microphone tab.
- Unidirectional front cargo pockets with concealed hand warmers.
- Large interior storage pocket.
- Glove hanger tab.
- 3M Scotchlite™ Triple Trim around base, across back, and around forearms.
- Nomex thread throughout.
- Size: Small - 3X-Large
- Color: Yellow
$0.00
The Rehab Vehicle Kit is easy to transport by pickup, SUV, rig or even the responding ambulance. Just two crewmembers can set up our rehab system or one member can get things going.
The entire Vehicle Rehab Kit is stored in heavy-duty vinyl bags, with multiple webbing handles for quick access, handling and portability. Leave the Kit on the BC or Safety vehicle, or store on the floor in the station and grab it when needed.
- CB16 Shelter
- Seating for responders and paramedics
- Medical supplies organizer with hard writing surface
- Crowd control gear
- Toilet with separate privacy shelter
- White board kit
- Portable hand washing station
- Cooler
- Towels
- Storage for your food and water supplies
$0.00
- Quick-change Spreader and Cutter Attachments.
- Power-Blade 'Cross-Over' enables prying from a gap less than 1/4' wide!
- Patented 70-degree pivot of spreaders and cutters for working tight areas or 'around-thecorner'.
- Lightweight and Portable.
- Stowed Compact. Rapidly Deployable.
- Power Pusher® 40' Ram option for distance spreading, holding and stabilizing operations.
- Low maintenance.
- Quiet operation.
- Performs in harsh environments; sand / water / hot / cold / O2-depleted atmospheres.
- Back-up 12 Volts DC power readily available.
- Pry Bar, Sledge Hammer and Come-Along are included in each kit.
- Multiple configurations available. Contact ADS today for more information.
$0.00
U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
$0.00
U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
$0.00
U.S. Chemical Storage specializes in code-compliant chemical storage buildings customized for government entities and unique military mission-critical requirements.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
We engineer both fire-rated and non fire-rated chemical storage buildings to protect against injuries or the loss of mission-critical equipment.
Our team designs custom and custom prefabricated chemical storage buildings to meet NFPA, EPA, and OSHA requirements for chemical storage, drop-over equipment buildings, lithium battery charging buildings, modular buildings, and explosive magazines.
$0.00
4 hour fire rated construction allows you to store flammables and other hazardous materials at distances of 10' or less from an occupied structure. This can reduce material handling time, as well as provide a convenient storage structure at your preferred location. Each of these standard models includes 60' wide UL Listed Door, explosion proof lighting, an explosion proof exhaust fan, shelving and a fire extinguisher. The included electrical items are pre-wired to an externally mounted 120/240V electrical panel that is ready for connection once installed on site. Custom building sizes can be manufactured to your specific requirements, and additional accessories are available as needed.
$0.00
The Amerex Compliance Flow extinguisher has a higher UL rating, extended discharge times and lower flow rate, allowing it to meet or exceed a diverse array of code requirements. If meeting code requirements in a harsh industrial setting is a priority, Compliance Flow models are likely the best choice for you. With our exclusive Amerex paint process featuring our proprietary zinc primer, fewer moving parts and simple design, these extinguishers provide the ultimate in corrosion resistance, plus minimal repair and maintenance costs over time.
FEATURES:
FEATURES:
- Rating 10A: 120B:C
- Weight 43 Lbs.
- 12-year warranty
$0.00
Vehicle mounted extinguisher is designed for military rescue applications. The system allows the vehicle to become a 'Portable Fire Truck'. The extinguisher was designed to be placed in the rear hatch of a HMMWV, but it can be utilized in numerous types of Military convoy vehicles.
- Truck mountable
- Easy to use and recharge
- 40ft hose
- 4lbs per second flow rate
- Quick flame knock down
- Low profile design
- Stored pressure design
$0.00
- Stored Pressure Unit
- Less expensive up front cost alternative
- Less expensive alternative for Life Cycle Costing
- Purple K:
- Agent is commonly used in hand held units for Tatical Wheeled Vehicles
- Brass fittings with swivels for ease of operation
- Co2:
- Rust free aluminum cylinders
- Warranty - 5 Years
- Capacity: 50lb PK/20lb Co2, 125lb PK/20lb Co2
$0.00
Holdfast Systems specializes in the development, design and manufacture of blast protective apparel. Holdfast Demining Aprons, Vests, Helmets and Face-shields are used around the world. Long and short Demining Vests and Aprons, Helmets and Face-shields are all in compliance with IMAS 10.30.
$0.00
- Eversoft cowhide outer shell
- Crosstech® moisture barrier
- SEF lining
- 2D pattern
- Wing Thumb™
- Leather gauntlet cuff
- NFPA _1971
$0.00
- Lightweight Thermo-FYR shell
- 6-point padded headband ratchet suspension
- Quick-release chinstrap
- Goggle clips
- 3 headlamp retention clips
- 4 lime reflective Reflexite® bars
- Shell Color: Black (full brim only), Blue, Orange, Red, Yellow, White
$0.00
- Lightweight Poly-Med shell
- 4-point headband ratchet suspension
- ANSI Z89.1-2003, Type 1, Class E certified
- Shell Color: Blue, Orange, Red, Yellow, White
$0.00
The USB Dual Port Charger provides a 5V power source and two (2) ports 3.1A output total. Its internal protection circuitry automatically shuts down in case of output shorts, excessive current draw, and temperature overload. Adaptive mobile device handshake supports wide variety of USB chargeable and powered devices. Its DC input provides the ability to charge with the Bren-Tronics Charger Module and Battery Status Meter.
FEATURES:
FEATURES:
- Dimensions (LxWxH): 2.62 in (66.55 mm) x 1.61 in (40.89 mm) x 1.14 in (28.96 mm)
- Weight: 0.13 lb (0.06 kg)
$0.00
One the highest BB-2590/U batteries qualified for Military use since 2004. Includes SMBus v1.1 and SBData v1.1. plus an absolute state of charge indicator that comes in two (2) separate five (5) segment LCD's with constant display. Typically used in SINCGARS & ATCS, Falcon radios, robots, and surveillance/sensors. Recommended charging platforms include Bren-Tronics SPC, SPC Lite, VMC, VMC Lite, and Solar Charge Controllers, as well as Single-Station Chargers.
FEATURES:
FEATURES:
- Dimensions (LxWxH): 4.4 in (112 mm) x 2.4 in (61 mm) x 5.0 in (127 mm)
- Weight: 3.1 lb (1.4 kg)
- Built to the same spec (MIL-PRF-32052/1) as the BT-70791A
$0.00
The BTA-70100-DCB adapter when used in conjunction with BTC-70100, Advanced Battery Charger (ABC), will simultaneously charge one or two of the following DEWALT® * power tool batteries: DCB201 20V, 1.5Ah, DCB203 – 20V, 2Ah, DCB205 – 20V, 5Ah, DCB606 – 20/60V, 6Ah, DCB609 – 20/60V, 9Ah
$0.00
The Dual Desktop charger for AN/PRC-152 Falcon radio battery. It will charge one (1) or two (2) Falcon radio (AN/PRC152) batteries. Powered from 100V-240V AC, this charger offers a simple solution for users that doesn't require bulk/multiple station chargers.
FEATURES:
FEATURES:
- Charger Dimensions (LxWxH): 3. 5in (89mm) x 5. 5in (140mm) x 2. 8in (60mm)
- Power Supply Dimensions (LxWxH): 3. 8in (97mm) x 2. 4in (62mm) x 1. 3in (32mm)
- Cable Dimensions (L): 72in (1829mm)
- Weight: 1. 4lb (0. 64kg)
$0.00
The Advanced Battery Charger (ABC) is a portable battery charging solution that offers next-generation improvements in size, weight and efficiency, while providing selectable power, faster charging times, increased environmental survivability and other significant innovations. Battery charging capabilities include but are not limited to BB-2590/U, BB-390B/U, BB-2557/U, Conformal Wearable Battery (CWB). Utilize your legacy SPC adapters or new ABC adapters. Designed to quickly and efficiently charge the current and future-format military and commercial batteries used on communication, electronics, robots and other tactical platforms.
FEATURES:
FEATURES:
- High speed, high power bulk charger for all military batteries
- Using AC, DC, NATO, solar as a power source (universal AC-DC inputs)
- Colors: Black base, tan cover
- Materials: Polypropylene ABS plastic base, aluminum chassis
- Certifications: CE, RoHS
- Dimensions: 20'L x 13.1'W x 6.3'H
$0.00
The Foldable, Lightweight, Expeditionary Charger (FLEX Charger) provides power to BB-2590/U and BB-2557/U batteries. Will charge four (4) sets of two (2) batteries. It can be powered from 20-36Vdc, 120W (max), or a solar panel. Incorporates advanced features such as Maximum Power Point tracking (MPPT) which allows the batteries to be charged more efficiently by constantly adjusting to utilize the maximum power available from a solar panel. Equipped with a 10W USB charging port, a trailer hitch connector, and blackout button for stealth operation.
FEATURES:
FEATURES:
- Charger Dimensions (LxWxH): Folded, 5.0 in (127 mm) x 5.6 in (143 mm) x 4.4 in (112 mm) Unfolded, 23.25 in (591 mm) x 5.9 in (150 mm) x 1.8 in (44 mm)
- Weight: 2.16 lb (1.00 kg)
$0.00
Expand the utility of the Bren-Tronics Advanced Battery Charger (ABC) with our line of Quad Chargers. Improve readiness by eliminating disparate chargers and reducing operation footprint. These drop-in ready solutions can charge the supported battery models listed in the Additional Information table below.
$0.00
Designed for demanding power and energy applications such as tactical/combat vehicles, silent watch, robotics, unmanned vehicles, weapon systems and hybrid power systems. The high output energy of 103Ah and nominal energy capacity of 2.7kWh. Cold-crankingæcurrent up to 1100A @ -18ÁC, 400A @-40ÁC Power Version (with no pre-heat required). SAE post terminals available.
FEATURES:
FEATURES:
- Lithium-Ion, 24V 6T battery
- Energy and power versions available
- Operable: -46C - +76C
$0.00
The "6 Pack" is a modular energy harvesting, storage and delivery system. With 6 BB-2590/U batteries, you are able to provide almost 2 kWh of energy storage.
FEATURES:
FEATURES:
- Stand-alone power source
- Energy storage
- Uses standard BB-2590/U batteries
- Solar input
$0.00
LexTM3 offers 60 Amp and 100 Amp overmolded Class L cable extensions and tie-ins in the growing line of EverGrip® cable assemblies. LexTM3s' overmold technology provides enhanced safety and durability for critical Military applications. The core of EverGrip® is a premold which provides a mechanical bond between the cable and connector, and totally encapsulates the contacts and conductors to prevent the possibility of pushed pins and broken conductors. Short circuits due to stray wires are eliminated. A solid thermoplastic elastomer overmold absorbs impact to protect internal conductors and provides enhanced flexibility and strain relief to extend cable life.
Products advertised for marketing purposes on this site may contain chemicals known to the State of California to cause cancer or reproductive harm. See –