The BSEC REBA is designed for use in field conditions and the device is intended tobe robust, hardwearing and the design of the REBA reflects this. REBA provides are-chargeable device that can be refilled in field conditions from conventional divecylinders, or compressed air pump. REBA is designed for use in an emergency eitherin a water, smoke ,or gas filled area. The REBA range is designed to be worn by theoperator in a number of different ways. The REBA 1 & 2 versions are contained withina neoprene sleeve and worn on the wrist or forearm. REBA 3-6 can be incorporatedinto the wearers' MOLLE System or equipment pouches. All of the REBA variantsdeliver an instantaneous source of breathable, compressed air without the needfor manually activating, priming or purging the device. Unlike like the current STASSalternative, REBA can be used in a handsfree manner.

Decon PLUS is the commercial equivalent to the U.S. DoD Joint General Purpose Decontaminant (M333). This three-part system is a complete decontamination kit for use against chemical and biological contamination.

Configuration: Each Decon PLUS kit includes three pouches of unique chemistry packaged laminated foil pouches. The decontaminant is stored as dry powders which are mixed at point of use with locally available water (fresh, brackish or salt water). Decon PLUS is easy to use. Simply mix with available water, apply to completely wet contaminated surfaces, then allow to dry completely. Once mixed, Decon PLUS can be applied to surfaces or equipment manually or using spray systems.

Application: When the Part 1 Oxidant component is dissolved in water, it releases hydrogen peroxide. The Part 2 Activator component contains materials that react with the hydrogen peroxide to produce peracetic acid (PAA). The activator also contains a blend of surfactants and a buffer to control the pH of the use dilution. The Part B Bio Activator component is added if the use dilution will be used for decontamination of biological agents. This component boosts the PAA concentration and adjusts the pH to enhance the antimicrobial efficacy.

As a decontaminant, it is very effective for the physical removal of liquid Chemical Warfare Agents (CWA's) and many Toxic Industrial Chemicals (TICs). Fuller's Earth is skin-safe, has a long shelf life (> 5 years), and is not affected by temperature extremes. It is ideal for direct application to contaminated Chemical Protective Clothing (CPC), equipment, and vehicles. M2DCON's Fuller's Earth Sorbent is rapid to deploy, easy to apply, and extremely effective for a wide-range of down-range DECON requirements!

The FM53 Mask is Avon Protections most technologically advanced mask with both positive pressure capabilities for SCBA, CCBA, APR, PAPR and on-demand negative pressure capabilities. Key integrated respiratory technology provides operational flexibility and long lasting comfort while countering multiple threat scenarios including chemical, biological, nuclear and radiological (CBRN) agents, toxic industrial chemicals and toxic industrial materials. The FM53 Twin Port Mask is available in four variable sizes with the option of twin port, right-hand single port or left-hand single port. Highlighted features include a patented twin exhalation valve, single port clear cheek for weapons sighting, panoramic flexible visor, voice projection unit and high flow fail safe drink device. The FM53 is NIOSH CBRN APR Standard Cap1 approved when outfitted with a CBRNCF50 filter, and when deployed with the CTCF50 filter it is NIOSH 42CFR84 approved to protect against riot control agents such as CS, CN & OC. The Avon FM53 Specialist Kit includes FM53 CBRN Twin Port Mask, Clear and Blueblocker Outsert Assemblies, CBRN Filter and Riot Agent filter, Mask Carrier and Faceform. Available as mask system only as well.

• Size: X-Small, Small, Medium, Large

The Avon MP-PAPR^TM system is a departure from traditional rigid plastic construction systems, the Avon MP-PAPR is the world's first flexible PAPR unit, constructed from the same field proven Chlorobutyl rubber, as used for the Avon 50 series masks range. The Avon MP-PAPR module delivers a compact and easily integrated PAPR unit providing cooling, lower user burden and reduced pulmonary stress. The unique shape and construction allow the wearer to mount the PAPR in multiple ways, maximizing integration while delivering higher protection levels and improved well-being. A complete set of certifications allows the user to add Avon MP-PAPR to existing fielded systems such as the 50 Series APR's, convert into a combination PAPR (Avon CS-PAPR) or revert back to an Avon EZAir configuration.

The Silent Entry Torch System (SETS) Single Bottle System is our smallest and most compact versions within the SETS line of products. The SETS offers a unique and compact option for tactical breaching or rescue operations, using exothermic cutting torch technology in a simplified form, designed with operational use in mind. The SETS uses a quick disconnect pistol-style cutting handle for easy switching of rods within seconds, compared to traditional collet connections. The SETS Cutting Rods are easily ignited with a 9V battery, getting you cutting quicker. These features combine to make the Silent Entry Torch System the smallest, lightest, and most versatile breaching and rescue torch available.

• Smallest, most compact SETS system
• Pistol-style rod cutting control handle
• 9V Battery Ignition
• 100% Made in the USA
• 72" of cutting or better on 3/8" steel
• Weight: 6 lbs. Fully Loaded
• Dimensions: 17.5" L x 4.5" W
• Capacity: 407 L @ 3000 psi

The Single Vessel Oxygen Storage System (SVOSS) is a large volume mobile compressed oxygen workstation. Developed for various operational applications, including medical operations, high-altitude jump operations, and exothermic breaching operations.

The SVOSS provides up to 339 CF (@ 3000 psi) of compressed oxygen, giving a team requiring a very large, but portable reservoir of compressed oxygen a sizable advantage in almost any situation

SPECIFICATIONS

• Single 1910 cu in aluminum lined carbon fiber cylinder
  
• CGA540 Inlet fill port with isolation on/off valve
  
• Cylinder and outlet pressure gauge
  
• Adjustable regulator for output adjustment
  
• Three (3) QD outlets for connecting multiple LP O2 hoses
  
• Removable and stowable wheels for system stacking and mobility when needed
  
• Built in mounting system for connecting multiple SVOSS systems together
  
• Dimensions: 56.5" H x 12" D x 12" W
  
• Weight: 92 lbs empty/103 lbs filled @3000 psi
  
• Capacity: 9.584 L @3000 psi (339 cubic feet)
  
  

The SETS™ Responder system allows first responders to use existing medical cylinders for exothermic cutting during rescue operations. The system gives the first responder the ability to burn through metal, locks, and hinges with ease.

The SETS™ Responder was designed for use in conjunction with medical oxygen cylinders with a CGA870 post valve connection.

SPECIFICATIONS

• Can be used with existing medical oxygen cylinders (post style)
  
• CGA870 regulator connection
  
• Quick connect/disconnect rod cutting control handle
  
• 9V battery rod ignition
  
• Compact nylon carry case
  
• Dimensions (with medical "D" cylinder): 22" L x 9.5" W x 5.5" H
  
• Weight (with medical "D" cylinder): 13.5 lbs.
  
• Cutting capability: (3) 18" SETS Exothermic Rods @ 2000 psi (O2)
  
  

The AN/PRC-148 Joint Tactical Radio System (JTRS) Enhanced Multiband Inter/Intra Team Radio, or JEM, is an evolution of the combat-proven AN/PRC-148 MBITR. This Software Communications Architecture-compliant platform hosts all of today's key waveforms and enables the integration of program enhancements, future waveforms, and additional modes via simple software downloads. The programmable cryptography supports the requirements of the National Security Agency's (NSA) crypto modernization program and is certified by NSA to protect the confidentiality of voice and data up through the Top Secret level. Programmable INFOSEC enables interoperability with a full range of legacy systems and allows for non-Type 1 or exportable INFOSEC implementations. Through a significant level of design similarity with the AN/PRC-148 MBITR, the AN/PRC-148 JEM's features - like the human-machine interface, minimize training requirements, enable rapid fielding, and provide the reliability that warfighters have trusted for years. The AN/PRC-148 is the cornerstone of a complete communications solution for mounted and dismounted operations including vehicle adapters and vehicle adapter amplifiers, base stations, man-portable systems, and a complete line of accessories.

• Contiguous 30 to 512 MHz Coverage
• Programmable Encryption Engine (AIM)
• 256 programmable presets
• Weighs less than 2 pounds
• 2M/20 immersible
• Compliant with the Universal Battery Charger (UBC) family of tactical chargers

The power-boosting Base Station for the combat-proven AN/PRC-148 family of radios provides a cost-effective fixed site configuration. The Base Station provides 20 Watts of RF power amplification across the full 30-512 MHz frequency band while allowing for a wide range of AC and DC input power sources. With a common human machine interface, users familiar with any of the AN/PRC-148 family products can immediately operate the Base Station. This commonality also translates into a simpler sustainment concept and faster repair times because fewer elements need to be stocked for field or depot repair. This results in lower life cycle costs to support the Base Station as well as the complete AN/PRC-148 family of products. Full AN/PRC-148 and Vehicle Adapter functionality for fixed applications.

• Contiguous 30-512 MHz Coverage
• 20 Watt RF Output
• Integrated Tunable Harmonic Filters
• Integrated Tunable Co-site Filters
• Environmentally Rugged
• Remote Control Head for Full Function Remote Operations
• Cable-free radio dismount capability in less than 2 seconds

The UBC-Lite combines the functions and capabilities of multiple battery chargers into one small, scalable package. It provides battery charging technology to the warfighter through a highly rugged, field-deployable, multi-battery solution for austere mission environments. Designed as a backpack portable charger configuration, the expeditionary charger provides a charging platform for a wide range of military batteries. FEATURES:

• Cable-free charging of all listed batteries (no external cables or adapters)
• Fast charging: two BB-2590 batteries simultaneously in 2.5 hours
• Built-in Solar MPPT for direct connection to solar panels
• Displays charging power, Battery State of Charge and State of Health
• High Power Inductive (wireless) charging for compatible smartphones
• Simultaneous Charging 3 Batteries and 2 USB devices
• User Selectable (On/Off) wireless and harvesting functions
• Power harvesting from solar, BB-2590, Conformal Wearable Battery, and vehicle power
• Mixed display technology: multi-color LEDs and a four-character display
• Typical Charge Time for listed batteries: 2.5 hours for Thales' family of tactical handheld radios, AN/PRC-152, AN/PRC-163, Conformal Wearable Battery or BB-2590

The Mission Module concept integrates Thales' AN/PRC-148 JEM handheld radios and Full Motion Video Receivers into an FMVR Mission Module form factor. This single device approach reduces the size and weight burden of the warfighter and provides the ability to receive Full Motion Video from ISR assets on the fly as the mission dictates. Users currently carry multiple radios to maintain access to legacy narrowband waveforms and wideband Full Motion Video downlinks from assets such as UAVs. As an 'add-on" module to the currently fielded AN/PRC-148 radios, the FMVR-MMs eliminate the need to introduce a separate and dedicated FMV ground terminal receiver and provide mission-specific extended capability to the user.

The unique and innovative technology of Mustang Survival's Compact Damage Tolerant Life Preserver (DTLP) provides an inflatable life-saving product that is functional even after a direct hit from a firearm or ballistic fragmentation. Compact and exhibiting a low profile when packed, the DTLP provides a maximum 65lbs. of buoyancy when fully deployed. This extreme level of buoyancy compensates for nearly all configurations of personal equipment and small arms carried on missions. The DTLP's one-size-fits-all design integrates with almost any tactical vest or armor plate carrier that uses Pouch Attachment Ladder System (PALS) webbing on Modular Lightweight Load-carrying Equipment (MOLLE) vests. The four-point attachment system incorporates side release buckles to permit emergency doffing of the life preserver and allows quick-release vests to fall away

• MD4030 Inflation - Hammar Auto Hydrostatic Inflator (HIT). Automatically inflates when
• submerged in 4+ inches of water. No accidental inflations due to humidity, rain, wash or spray.
• MD4035 Inflation - Halkey Roberts Manual Inflator. Uses 2x 35g CO2 cylinders.
• Each DTLP contains two inflatable cells made from Radio Frequency (RF) welded, polyurethane
• coated nylon fabric. Both cells incorporate oral inflation tubes to provide a means to reduce
• buoyancy or to top-off or fill each bladder, should failure of the CO2 cylinders occur, or if reduced
• inflation is experienced when operating in cold weather conditions.
• Both come standard with two Kevlar® ballistic pouches (P/N MA4050). In the event a ballistic
• impact ruptures the cylinder the Ballistic Cylinder Containment Pouch safely disperses the force
• of the CO2, and helps prevent the cylinder from becoming a projectile (MD4035FR only) while
• containing dangerous fragments.

QinetiQ North America's TASK™ Radiosonde is the world's lightest radiosonde, weighing in at only 38 grams (1.5 oz). The TASK Radiosonde collects and broadcasts high resolution pressure, temperature, humidity, and winds aloft data in real-time as it ascends through the air column. The data is relayed back to the TASK ground station transceiver enabling forward deployed units to report real-time atmospheric conditions either by voice or net-centric data transmission to any users requiring the information. The data can also be imported into standard weather forecasting software to produce tactical weather reports for mission planning and modeling.