EQUIPMENT

Atlantic Signal Harris 117 / 152 and Thales 148 cabled radio connector assembly Atlantic Signal designed, developed and manufactures the over-mold assembly of the PRC 6-pin radio connector. The long "bullet-style" over-mold provides ample room for soldering of individual wires while adding extra strength and support for the cable assembly. Further, it prevents dust, dirt and water ingress. Atlantic Signal interfaces to over 100 LE and Military radios worldwide In house wiring and over-mold control quickens delivery to customers versus waiting for the connector supplier to perform those tasks Shown - our D Series 6 pin plug & play cable assembly designed and built initially for the FBI's Special Operations Unit's Warrior comms suites. We can also build the assembly hard wired to any and all of our other push-to-talk options nan nan nan

By far, our most popular single comm push-to-talk! The Invictus Single™ comm was the initial next generation PTT designed, developed and manufactured by Atlantic Signal - based on feedback from clientele in the field. The Invictus Single™ comm push-to-talk is our next generation design of the original U94 PTT. Over 18 months in development, following feedback from operators in the field. All circuitry, bare wires, solder joints and switch lugs are sealed 100% from dust, dirt and water ingress. The blackened stainless steel MOLLE clip was designed to slide through two strips of MOLLE bands for added stability. The clip can be mounted at the 12, 3 ,6 or 9 o'clock positions and can be removed from the rear side of the PTT housing and affixed to the front to accommodate left handed shooters. Custom strain and stress reliefs were designed in as part of the PTT body housing to ensure cable stability and deflect concerns of cables / wiring becoming disengaged and or pulled from the housing. The PTT actuation switch is shrouded to avoid A/D issues. The Invictus body was designed to ergonomically fit easily in the palm of the hand while lining up the thumb for ease of depression and release against the switch. The 6 pin radio connector shown here is just a sample of the over 100 portable radios worldwide that Atlantic Signal builds interfaces for. We only use the aluminum housing 6 pin, perform all of the individual wiring/soldering and over-mold the entire assembly to add strength to the overall build while also preventing dust, dirt and water ingress. nan nan nan

Atlantic Signal HARRIS PRC-163 dual band cabled radio connector assembly Atlantic Signal designed, developed and began manufacturing the PRC-163 nineteen pin Nemesis connector assembly in the Winter of 2017. Atlantic Signal interfaces to over 100 LE and Military radios worldwide This is the D Series PRC-163 Over-molded Radio Connector terminated at the opposite end with our custom designed 60 degree plug and play connector for our VIPER Series PTTs Twin Atlantic Signal PRC 163 Connectors without EUD Hard-Wired Atlantic Signal Invictus Push-to-Talk with our dual band PRC 163 connector with EUD Close up of the Atlantic Signal custom designed PRC 163 19 pin cabled connector with EUD Atlantic Signal custom designed EUD connector with adjustable rubber strap for keeping in place when not in use

A ruggedized, submersible, two-wire kit available for operators where wearing a headset or shoulder mic is not warranted. The Lo-Vis R23 was specifically developed for US Military applications where a less overt kit was required for specific operations. The speaker and microphone are both IP67 rated and built of blackened stainless steel. The circuitry housing of the Lo-Vis R23 is completely sealed, preventing dust, dirt and water ingress. Each of the kit's three cables are captured by extra long / flexible strain and stress reliefs. The Lo-Vis R23 features a stainless steel, rotating alligator clip on both the speaker and microphone assemblies. The coiled ear tube assembly is replaceable and was designed to allow for multiple styles of ear pieces and sizes. The Lo-Vis R23 features an Atlantic Signal designed and manufactured over-mold capturing the NEXUS 4 or 5 conductor male plug assembly.

Ruggedized, heavy duty, dual radio. lo-vis solution for the professional who is tired of inexpensive, cheaply made, poorly designed, non-tactical grade Lo-Vis / PSD comms. A ruggedized, submersible. dual radio. three wire kit available or operators where wearing a headset or shoulder mic is not warranted. The Lo-Vis R23 was specifically developed for the US Military for applications where a less overt kit was required for specific operations. The microphone and both speakers are IP67 rated and built of blackened stainless steel. The circuitry housing of the dual comm Lo-Vis R23 is completely sealed, preventing dust, dirt and water ingress. Each of the kit's four cables are captured by extra long / flexible strain and stress reliefs. The Lo-Vis R23 dual comm features stainless steel. rotating alligator clips on both speaker assemblies as well as the microphone assembly. The coiled, ear tube assemblies are replaceable and were designed to allow for multiple styles of ear pieces and sizes. The Lo-Vis R23 features an Atlantic Signal designed and manufactured over-mold capturing a Nexus 5 conductor male plug assembly.

Atlantic Signal Motorola APX coiled radio cable assembly Our most popular Motorola connector assembly for Law Enforcement portable radios - the APX. Atlantic Signal interfaces to over 100 LE and Military radios worldwide Side profile of APX connector with knurled radio connection screw Atlantic Signal Motorola APX coiled cable assembly interfaced to our INVICTUS single comm push-to-talk assembly. We offer all radio connectors in both plug & play and hard-wired versions

Atlantic Signal Motorola XTS coiled radio cable assembly Our third most popular Law Enforcement connector assembly - the Motorola XTS. Atlantic Signal interfaces to over 100 LE and Military radios worldwide Bottom, back view of the Motorola XTS connector depicting radio edge clip assembly Twin Motorola XTS coiled cable connector assemblies interfaced to our dual comm "SF" model push-to-talk. We offer all of our radio connectors in both plug & play and hard-wired versions

the world's first all-n-one
hi/lo impedance ics cable
The world's first and only all-in-one hi/lo impedance ICS cable. Designed exclusively by Atlantic Signal for our 21GC communications suite and Aries push-to-talk. No longer a need to carry both a high and low impedance ICS cable and wondering when you get on a bird, which cable you need in order to communicate through the ICS. The Nightstalker features a surface-mounted, user interface, depression button to switch between high and low impedance settings. Patent pending.

The Revolution-X™ (aka REV-X™) was the brainchild of a US Military Special Operations client desiring a headset that could provide two forms of radio receive audio, having no over-the-ear cups which, in turn, could provide ventilation and personal situational and directional awareness on demand, and could be exposed in up to 5 meters of salt/freshwater submersion for up to 5 hours, all of which could be worn comfortably under a helmet for extended periods of time. This tall demand signal resulted in a complete re-set of how a tactical headset should be designed and perform - all further complicated with an above-industry standard expectation related to water exposure and submersion. The complicated nature of the REV-X™ resulted in a near 3-year trial and error development project with multiple iterations being jumped, swam and put through a variety of ground-based operations by the client.

Atlantic Signal THALES PRC-148R maritime cabled radio connector assembly Atlantic Signal designed, developed and manufactures the over-mold assembly of the maritime PRC-148 radio connector. The long "bullet-style" over-mold provides ample room for soldering of individual wires while adding extra strength and support for the cable assembly. Atlantic Signal interfaces to over 100 LE and Military radios worldwide In house wiring and over-mold control quickens delivery to customers versus waiting for the connector supplier to perform those tasks Shown - our D Series PRC-148 R maritime plug & play cable assembly designed and built initially for Naval Special Warfare's DOMINATOR II comms suites. We can also build the assembly hard wired to any and all of our other push-to-talk options nan nan nan

Atlantic Signal AVON Mask Comms Cable Kit for the C50, M50, FM53 & FM54 protective masks. Our kit is the only AVON mask adapter designed to disable your headset's microphone to avoid the negative impact of environmental noise outside the mask when transmitting We developed the AVON Comms Cable Kit at the request of a representative of USSOCOM originally for the AVON FM53 mask. The specific request was to develop and deliver a cable kit that interfaces to the mask's ECP (electronic communications port) and when connected to a headset - the kit would disable the operator's headset boom mic - only using the microphone inside the mask, directly in front of the mouth. This allows an operator, when wearing an AVON mask, boom mic headset and our cable kit - to literally whisper when transmitting in an even extremely high noise ambient environment because none of the noise in his surroundings is being transmitted from the headset boom mic positioned outside the mask Pictured - 2 pin adapter cable built to interface to the AVON masks's electronic communications port built into the front of each model of AVON mask Custom over-molded NEXUS female jack assembly - your headset down lead connects here. Over-mold features a TPE cap assembly to protect the interior of the female Nexus assembly when not in use. Custom over-molded male, 5 conductor, Nexus plug assembly designed to connect directly into your push-to-talk nan nan

Atlantic Signal developed, designed and manufactured DOD ICS cable assembly Originally developed in 2011 with the assistance of the Federal Bureau of Investigation Special Operations teams. This cable is traditionally used by DOD clients utilizing air assets. The custom circuitry, developed by Atlantic Signal, inside the over-molded Nexus connector - reads the ICS impedance levels and adjusts the headsets' performance accordingly The housing shown in the photo depicts the larger than average over-sleeve surrounding the Nexus plug - this contains the custom DOD asset compatible circuitry The plug and play design of the Atlantic Signal DOD ICS cable - allows an operator to stow the cable when not in use. When connected to the appropriate PTT housing, the custom over-molded connector stands at a 60 degree angle for ease of access with a gloved thumb and forefinger. Further, when connected to a PTT box, the connector is angled 45 degrees in toward the body armor for a tight fit nan nan nan

Atlantic Signal designed, developed and manufactured General Aviation ICS cable assembly Originally developed in 2011 with the assistance of the Federal Bureau of Investigation Special Operations teams. This cable is traditionally used by non-DOD clients utilizing air assets. The custom circuitry, developed by Atlantic Signal, inside the over-molded Nexus connector - reads the ICS impedance levels and adjusts the headsets' performance accordingly The housing shown in the photo depicts the larger than average over-sleeve surrounding the Nexus plug - this contains the custom General Aviation asset compatible circuitry The plug and play design of the Atlantic Signal General Aviation ICS cable - allows an operator to stow the cable when not in use. When connected to the appropriate PTT housing, the custom over-molded connector stands at a 60 degree angle for ease of access with a gloved thumb and forefinger. Further, when connected to a PTT box, the connector is angled 45 degrees in toward the body armor for a tight fit nan nan nan

UTS TM Series expeditionary shelters feature an innovative rapid deployment system engineered for speed, simplicity, and reliability. Each soft shelter incorporates a unique external folding frame design paired with an integrated internal liner system that works seamlessly with the outer fabric.

This advanced configuration allows for quick, intuitive setup while minimizing manpower requirements and training time. The rope-and-pulley mechanism and frame architecture provide a straightforward, easy-to-remember deployment process that enables consistent performance in the field.

All TM Series shelters can be fully deployed in just 5–15 minutes, allowing units to achieve operational readiness quickly and efficiently in dynamic environments.

UTS TM Tall Series shelters provide a larger footprint than the standard TM Series, offering increased floor space and additional overhead clearance to support expanded operational needs. The added interior volume makes the TM Tall Series ideal for applications requiring more workspace or equipment integration.

Despite the larger size, TM Tall Series shelters can be fully deployed in less than 20 minutes with a team of 3–6 personnel. Like the TM Series, they incorporate the same innovative external folding-frame design and integrated internal liner system for streamlined setup and durability.

The rapid, intuitive deployment process reduces setup time, lowers manpower demands, and simplifies training, ensuring fast mission readiness without added complexity.

The TXL Series represents the largest shelters in the UTS family, providing expansive interior space to support large scale operations. Despite their size, TXL Series shelters retain rapid deployment capability and are fully man-portable, requiring no tools, ladders, or specialized equipment for setup.

Designed as a medium scale tactical shelter solution, the TXL Series supports operational missions, maintenance activities, and the protection of large or high-value assets. Each shelter deploys from the ground up without material handling equipment, external power, or work at height, reducing logistical complexity and enhancing safety.

Modular, man-portable components enable fast-in, fast-out deployment in dynamic environments. Like the TM Series, each TXL module integrates a rugged aluminum frame with durable PVC-coated fabric to ensure strength, weather resistance, and reliable performance at increased scale.

The result is a scalable, mission-ready shelter system that delivers capacity, durability, and speed without added deployment burden.

Create multiple configurations to serve your mobile mission. All UTS Shelter Connectors employ a two-layer system to provide a weather tight seal and blackout capability.

Vehicle Connectors provide connection for a variety of vehicles to meet a range of needs from tactical to logistics. The connectors provide a weather tight and blackout connection between the vehicle and the shelter.

The SM Series is a compact shelter designed primarily to function as an entry vestibule or corridor between multiple shelters within a larger complex. When used as an entry point, it provides a protected transition space that shields the interior environment from extreme weather conditions while maintaining blackout integrity during entry and exit.

The SM Series enhances overall shelter system performance by improving environmental control, light discipline, and personnel flow between connected structures.

In addition to its role as a connector or vestibule, the SM Series can also operate as a small standalone shelter, offering flexible deployment options to meet a variety of operational needs.

The UTS XGT™ delivers quiet, reliable power and integrated environmental control for expeditionary operations. Designed for performance and ease of use, the XGT™ combines dependable components, intuitive controls, and integrated storage capacity for both fuel and the UTS shelter system.

Engineered for extended missions, the XGT™ provides up to 30 hours of runtime, reducing refueling frequency and increasing operational endurance. Operating at just 65 dB at 25 feet, it supports low-signature environments while maintaining full power output. Fuel consumption ranges from 2.2 to 4.4 gallons per hour at full load, delivering efficient performance across mission profiles.

Fuel-fired engine heaters are standard on every unit, ensuring reliable cold-weather starting and operation in extreme environments. A digital controller provides continuous system health monitoring and advanced functionality, enabling operators to manage performance with confidence and precision.

The XGT™ is compatible with a wide range of diesel and aviation fuels, including DL1, DL2, JP-5, and JP-8, enhancing flexibility and simplifying logistics in deployed settings.

The result is a compact, mission-ready system that delivers dependable power, environmental support, and operational efficiency in demanding field conditions.