Toll-Free: 866.936.3890
Filters
Energy Focus
$0.00
The Energy Focus Intellitube® Series LED retrofit tube is our proprietary designed, all-in-one level tube that offers direct-wire (ballast not required) and direct-fit (compatible with ballasts) functions. In direct fit, it can replace an existing fluorescent lamp. In the event of a ballast failure, in direct wire mode, the Intellitube® will require re-wiring to the main power and continue to provide the most efficient light output.
FEATURES:
FEATURES:
- Connection: Medium Bi-Pin (G13) with 90° push-lock rotation option; direct retrofit for T8, T10 and T12 lamps.
- Input Voltage: 110 -277VAC, 50/60Hz.
- Lamp Life: Rated life of 50,000 hours to 70% lumen maintenance.
$0.00
These Globe Fixtures are waterproof, shockproof, and consume 80% less power than incandescent bulbs. After installation, there should be no need to revisit the fixture for maintenance for upwards of ten years. Unlike outdated incandescent technology, the LED Globe Fixtures do not have a filament that breaks often, especially on moving ships. Changing bulbs is not necessary, providing less needed maintenance and more storage space.
FEATURES:
FEATURES:
- Large LED Globe Color Options: White (19W), Red (8W), Amber (19W).
- Small LED Globe Color Options: White, Red, Blue, Amber. (5W).
- NSN's available for each.
$0.00
The Energy Focus brand LED Berth Fixture consumes 50% less power than other legacy Berth Lights; additionally displaying a lifespan of 50,000 hours until it reaches 70% of its original lumen performance. After installation, there should be no need to revisit this fixture for maintenance for upwards of ten years. Changing bulbs is not necessary, providing even less maintenance and more storage space. *Designed to be used with Energy Focus's Military T5 LED Lamp.
FEATURES:
• Available with traditional or USB outlet
• Does not require a starter
• No ballast "hum"
• Legacy T5 can be easily replaced with Energy Focus' T5 LED lamp
• Uses 50% of the energy of legacy fixture
FEATURES:
• Available with traditional or USB outlet
• Does not require a starter
• No ballast "hum"
• Legacy T5 can be easily replaced with Energy Focus' T5 LED lamp
• Uses 50% of the energy of legacy fixture
$0.00
FEATURES:
- Direct replacement for all 12' T5 fluorescent lamps
- No modifications needed for retrofit
- Low power consumption significantly increases life of legacy ballast
- Starter must be removed for normal operation
- Does not contain any hazardous materials
- MIL Qualification: MIL 16377
- Made in the USA
$0.00
The 18" MIL Intellitube® functions normally in two installation modes: direct-wire (ballast not required) and direct-fit (compatible with ballasts). In direct-fit mode, it can replace an existing fluorescent lamp. In the event of a ballast failure, in direct-wire mode, will provide optimal efficiency and eliminate any dependence on a ballast.
FEATURES:
FEATURES:
- Designed for use in all MIL-F-16377/5, /58, /65, /66 fixtures
- Easily 'snaps' into legacy fluorescent fixtures (F15, T12)
- No modifications needed for retrofit
- Lower power consumption significantly increases life of legacy ballast (can operate with existing ballast)
- Requires removal of starter for normal operation
- Contains no mercury
- Drop-in replacement for F15T12 lamps
- MIL Qualification: MIL-DTL-16377
- Complies with ANSI C78.81
- Form Factor: T12 LED Lamp
- Made in the USA
$0.00
24" MIL Intellitube® functions normally in two installation modes: direct-wire (ballast not required) and direct-fit (compatible with ballasts). In direct-fit mode, it can replace an existing fluorescent lamp and run off the existing ballast. In the event of a ballast failure, in direct-wire mode, it will provide optimal efficiency and eliminate any dependence on a ballast.
FEATURES:
FEATURES:
- Designed for use in all MILDTL-16377/8, /11, /12, /57, /73, /74 & /75 fixtures
- Drop in replacement for F20T12& F17T12 lamps
- Can operate with or without a starter
- Can operate with or without ballast
- Compatible with 2 & 3-wire ballasts
- Lower power consumption significantly increases life of legacy ballast
- Contains no mercury
- No fluorescent buzzing or flickering
- Compatible with all existing color sleeves
- ONLY time-tested solution for the fleet with over 400K in service
- MIL Qualification: MIL-DTL-16327
- Form Factor: T12 LED Lamp
- Complies with ANSI C78.81
- Made in the USA
$0.00
46" MIL T12 LED tubular lamp does not require a ballast to function normally (direct-wire installation mode). Provides high efficiency and eliminates any dependence on a ballast.
FEATURES:
FEATURES:
- Designed for use in all MIL-DTL-16377/13 fixtures
- Replacement for the 60W, F48T12/CW/HO fluorescent lamp
- Removal of ballast and starter required for normal operation
- Lamp is compatible with multiple colored filter sleeves
- MIL Qualification: Passed MIL-DTL-16377
- Form Factor: T12 LED Lamp
- Complies with ANSI C78.81
- Made in the USA.
- ONLY hangar bay retrofit solution backed by NAVSEA approval
$0.00
FEATURES:
- Virtually eliminates maintenance schedule of legacy explosion-proof globes
- Red and white versions available
- 80% reduction in energy use compared to legacy solution
- Utilizes legacy bolt pattern
- MIL Qualification: Per MIL-DTL-16377J (SH)
- Explosion-proof tested in accordance with MIL-DTL-16377/25 and UL 844
- Field Replaceable Parts: Globe, Driver, LED Array
- Made in the USA
$0.00
The Flood and Area Light is a mission-ready, energy efficient LED light. Comes in a single or double design where customers can choose the beam angle to accommodate a full flood range or a more specified area range.
FEATURES:
FEATURES:
- Marine use rated
- ABS Type Approved
- Rugged construction to handle demanding environments.
- Longer lasting and better quality of light
- Eliminates time-consuming maintenance.
- Multiple beam angles available to suit environment: 14, 25, 44, 57, 66
- Mounting: Surface/Rotatable/Yoke
- Regulatory Approval: Type (salt water) and UL 844, ABS, UL 1598 and UL 8750
- Made in the USA
$0.00
Eliminate time-consuming maintenance by providing longer lasting and better quality of light.
FEATURES
FEATURES
- Rugged construction to handle demanding environments
- Rated for Hazardous Locations: Class 1, Division 2, Groups A, B, C, D
- Mounting: Vessel and flat mount
- Enclosure Type: Octagonal shape for easy installation
- Regulatory Approval: UL 1598A [Outside Type (salt water)] and UL 844 [Wet Location Listed], ABS, UL
- 1598, and UL 8750
- Made in the USA
Products advertised for marketing purposes on this site may contain chemicals known to the State of California to cause cancer or reproductive harm. See –