Toll-Free: 866.936.3890
Filters
EOD Gear, CWMD Supplies, and CBRN Protection Equipment
$0.00
The DIVE MATE takes portable breathing air compressors to a new level! Complete with air purification, DIVE MATE is a safe and reliable three or four stage breathing air compressor designed to give you lightweight portability. Available in your choice of electric motor, gasoline engine or diesel engine drive.
FEAUTURES:
FEAUTURES:
- Available in two sizes 8 & 10 SCFM:
- Choice of prime mover/drive
- Electric motor, single phase or 3-phase
- Gasoline engine
- Diesel engine (DMT 08)
- Inlet filter
- Stainless steel intercoolers and aftercooler
- High temperature switch (except D drive)
- Vibration isolators
- P31 Purification
- Low oil pressure switch (electric and engine drive with electric start)
- Motor starter with NEMA 4 enclosure
- Hourmeter
- Pressure switch
- Visual CO/moisture indicator
$0.00
The JUNIOR II is complete with air purification system and fill hose are safe, reliable three stage compressors designed for serious sport divers. Available in single phase 115/230 VAC and three phase 230/460 VAC electric motor, gasoline or diesel engine drive.
FEATURES:
FEATURES:
- BAUER P0 breathing air purification system
- Belt guard designed to meet OSHA guidelines
- Inlet filter
- Vibration isolators
- High temperature switch (G drives)
- 5 foot fill hose assembly with SCUBA yoke
- Bleed valve and pressure gauge
$0.00
Harsh OFFSHORE environment eating up your compressors? BAUER has the solution! The OFFSHORE package; a unit designed specifically to combat the rigors encountered in offshore use.
FEATURES:
FEATURES:
- BAUER breathing air purification system
- TEFC motor
- NEMA 4 rated electrical enclosure with UL® listed control panel
- Compressor low oil pressure and high temperature safety shutdowns
- Emergency stop push button
- Automatic condensate drain system with non-corrosive condensate reservoir and integrated float switch
- Automatic "Full" indication and compressor shutdown
- Gauge panel
- Lifting lugs integral to unit frame
- Inlet particulate filter and maintenance indicator
- On/Off switch and final pressure switch
- Powder coated aluminum frame and cabinet enclosure
- 316 stainless steel tubing
- Stainless steel fittings, fixtures, and fastening devices
$0.00
When you require a rugged trailer built for the fire service, rather than a cheap lightweight imitation, look to BAUER. Our TCOM TRAILER designs are powered by a unique diesel/electric dual drive system. Each system is equipped with a two position containment fill station, an enclosed fill control panel, four ASME storage cylinders and integral SCBA storage for up to twelve SCBA cylinders, all incorporated onto a heavy duty frame built by BAUER.
FEATURES:
FEATURES:
- BAUER breathing air purification system with SECURUS
- BAUER PLC based controller with multicolor touchpad display
- NEMA 4 rated electrical enclosure with UL® listed control panel
- Hinged fill control panel with Lexan laminate air flow/fill schematic
- Automatic condensate drain system with non-corrosive condensate reservoir and integrated float switch
- Automatic "Full" indication and compressor shutdown
- Two (2) 6000 PSIG UN code stamped air cylinders
- Integral SCBA storage for up to twelve (12) SCBA cylinders
- NFPA 1901 2016 edition compliant 2 position containment fill station accommodates SCBA or SCUBA cylinders up to 31" overall length
- Unique diesel drive system incorporating our exclusive automatic belt tensioning system
- High gloss powder coat paint for a hard durable finish
- Hydraulic surge brakes with breakaway actuator
- Four (4) bank dual function cascade controls with air direction valve
- Formed structural steel frame designed and built by BAUER
- Hypalon® type cover protection for the operations panel and fill station
- Refill port
- CO monitor with calibration kit
- 2" ball hitch
$0.00
UNICUS III cylinder recharging station is the total system for refilling high or low pressure SCBA or SCUBA cylinders. The integrated system design combines a BAUER high pressure compressor, BAUER breathing air purification system, air storage system, cascade fill panel and containment fill station into one user friendly workstation. Independently tested for safety, a UL® listed electrical assembly and the proven reputation for superior performance makes the UNICUS III the most advanced fill station available!
FEATURES:
FEATURES:
- BAUER breathing air purification system with SECURUS
- BAUER PLC based controller with multicolor touchpad display
- NEMA 4 rated electrical enclosure with UL® listed control panel
- Compressor low oil pressure and high temperature safety shutdowns
- Emergency stop push button
- Hinged cascade fill control panel with lexan laminate air flow/fill schematic
- Audible alarm on safety shutdowns
- Inlet filter maintenance indicator
- Automatic condensate drain system with non-corrosive condensate reservoir and integrated float sensor.
- Automatic "Full" indication and compressor shutdown
- Two ASME code stamped air cylinders installed in an integral rack designed to hold four cylinders
- Sound attenuating enclosure with slam-action latches and lift-off type hinges
- NFPA 1901 Compliant Three position Containment Fill Station accommodates SCBA or SCUBA cylinders up to 31" overall length
$0.00
- Gemini™ 7.5 oz - Natural, outer shell and a Caldura® SL2i with GORE™ CROSSTECH® 3L liner system.
- Maximum Mobility design turnout coat and pants tailored to reduce stress.
- Standard includes 3' double stitched 3M™ Scotchlite™ Lime -Yellow triple trim in NFPA pattern.
- Ara-shield™ reinforcement on knees, thumb holes and cuffs.
- Includes up to five (5) 3' letters on the coat back.
- Additional options include pant closure, removable knees, trim color options, additional lettering and name badge.
$0.00
- Omni Elite® II - Brown, outer shell and a Synergy™ 2L with CROSSTECH® Black 2L liner system.
- Maximum Mobility design turnout coat and pants tailored to reduce stress and increase mobility and comfort.
- Standard includes 3' segmented, Lime -Yellow 3M™ Comfort trim in NFPA pattern.
- Enhanced thermal protection at the elbows and shoulders.
- Ara-shield™ reinforcement and silicone padding on knees.
- Includes up to five (5) 3' letters on the coat back.
- Additional options include pant closure, removable knees, additional lettering and removable name badge.
$0.00
- Brigade™ 750, NOMEX® IIIA 7.5 oz – Tan / Aralite® NP 7.2oz / CROSSTECH® Moisture Barrier.
- Turnout coat and pants designed for simplicity and functionality.
- Standard includes 3' segmented, Lime -Yellow 3M™ Comfort trim in NFPA pattern.
- Enhanced thermal protection at the elbows and shoulders.
- Ara-shield™ reinforcement and padding on knees and cuffs.
- Includes up to five (5) 3' letters on the coat back.
- Padded, parachute style pant with H-back suspenders with snap style attachments.
- Options include removable knees, additional lettering and removable name badge.
$0.00
- Gentex 1088 Aluminized (silver) outer shell and a Caldura® SL2i with a 3 layer CROSSTECH® liner system.
- Maximum Mobility design turnout coat and pant tailored to reduce stress and increase mobility and comfort.
- Enhanced thermal protection at the elbows and shoulders.
- Pleated flex knee with removable Ara-shield™ reinforcement knee pad and enhanced thermal protection.
- Black Ara-shield™ reinforced cuffs.
- Padded, parachute style, H-back suspenders with snap style attachments.
$0.00
- Millenia™ Light shell with water resistant finish and CROSSTECH® S/R protective barrier line.
- Hip length (32') jacket, pattern design includes a bi-swing back, shaped elbows and underarm gussets for proper fit and increased mobility.
- Includes 3' 3M™ Scotchlite™ lime/yellow fire coat-grade reflective trim around chest, waist, arm cuffs, and leg cuffs.
- Ara-shield sleeve hem and knee reinforcements with removable knee and elbow pads.
- Includes up to 8 - 3' or 12 - 2' lime/yellow letters on back.
- Waist adjustment system; suspenders; gusseted leg zipper (14') to fit over boots.
$0.00
These 2 hour uni-directional fire rated chemical storage buildings provide a compliant structure that can store hazmat such as flammables at distances of 10' - 75' from an occupied structure. Each is prefabricated at our factory in North Carolina, and is ready for use upon delivery. These models include a 60' wide UL Listed Door, explosion proof lighting, an explosion proof exhaust fan, shelving and a fire extinguisher. An externally mounted electrical panel (120/240V) is pre-wired to each electrical component and ready for connection once on site. We can apply any other accessories needed, and custom sizes are available based upon your specific needs.
$0.00
4 hour fire rated construction allows you to store flammables and other hazardous materials at distances of 10' or less from an occupied structure. This can reduce material handling time, as well as provide a convenient storage structure at your preferred location. Each of these standard models includes 60' wide UL Listed Door, explosion proof lighting, an explosion proof exhaust fan, shelving and a fire extinguisher. The included electrical items are pre-wired to an externally mounted 120/240V electrical panel that is ready for connection once installed on site. Custom building sizes can be manufactured to your specific requirements, and additional accessories are available as needed.
$0.00
Pallet storage buildings provide compliant solutions for the storage of hazardous waste and other chemicals. Each unit is designed to compliantly storage pallets or totes on a raised floor with EPA compliant spill containment located directly beneath this floor. Removing the galvanized steel grating, which is screwed to the floor supports, accesses the spill containment area. These buildings are designed for permanent installations, but can be relocated as needed. Swing doors are installed with hold open latches for ease of loading/unloading. A full line of accessories can be added to these units for any operation. This includes lighting, fire suppression, cooling, heating and other aspects. Custom sizes are available, each building has a 15-year structural warranty.
$0.00
Non fire rated chemical storage buildings are an ideal and compliant way to store your POL or hazardous waste materials. These structures are prefabricated and delivered ready to use. The continuously welded construction provides a durable construction that allows a 15-year structural warranty. A 54' wide door with hold open latch is included with each standard model, as well as screened and louvered vent openings and a static grounding rod for exterior installation. These buildings also include interior explosion proof lighting, an explosion proof exhaust fan, shelving and a fire extinguisher. The electrical components are pre-wired to an externally mounted 120/240V electrical panel. Other accessories are available as needed, and custom sizes can be designed and manufactured.
$0.00
Made with high-quality, durable components, Guardian 17 system provides long-lasting performance, while requiring almost no maintenance and enables fast deployment.
- Dust and waterproof system designed for harsh field conditions
- An optional Mil-STD connectors
- Xsight filter for quick and accurate image enhancement
- One-touch operation
- ROV ready
$0.00
Easily get the visibility needed to quickly make informed decisions, with easy-to-use Guardian 12 tactical systems designed to speed and facilitate the work of EOD technicians.
- Lightweight backpack system
- Plug & play solution
- Exceptional minimal deadspace from both sides of the panel
- Fully portable
$0.00
Safeguard EOD technicians as they work, and protect other people and assets, with Defender 17 system optimized for safe, fast work in high-risk environments.
- Robust and field ready rugged case system
- Thin panel to adjust challenging field conditions
- ROV ready
- Cost-effective solution
$0.00
Keeping in mind the need for easy mobility during EOD technicians' work, the Defender 12 system come in a dedicated carrying case or backpack that is lightweight and compact and easily handled by one person.
- Plug & play solution
- Lightweight system
- Thin panel to adjust challenging field conditions
- Cost-effective solution
$0.00
As the company who developed the first Slider, we are proud to present the new and improved Slider solution for obtaining a large imaging area at a click of a button. Vidisco's slider is a compact lightweight solution designed to integrate with any type of Vidisco's imagers. The Slider enables a modular image acquisition between one to sixteen images!
According to the inspected object size, you can choose your region of interest and decide the amount of images to take. The new Slider has the unique ability to operate as Òstand-alone" in a full wireless configuration and battery operation.
- One-touch stitching feature
- Modular Ð enables to choose region of interest
- Fast image acquisition
- Compact- a single Pelican case
$0.00
Vidisco's new-generation portable digital X-ray systems are powered by the advanced VEO software solution. Designed with the operator in mind, VEO software is exceptionally fast and easy to use. With a simple, streamlined workflow and advanced filtering options and application-specific features, it delivers high-quality results in seconds.
- Only three operating screens
- Fast and easy workflow
- Sophisticated filtering
- Remote operation - Safe work from a distance
$0.00
Easy and economical to maintain and service. Dependable drawn steel cylinders. Durable high gloss polyester powder paint. All metal valve construction brass valve - Heavy duty chrome plated brass valve body stainless steel handle and lever. Bilingual labels. Option of chrome cylinders.
FEATURES:
FEATURES:
- Rating: 120:B:C
- Weight: 39 Lbs.
- Extinguishing Agent: Regular Dry Chemical
- Brackets: 00577 Wall/ Optional: 810
- Warranty Period: 6 Year Warranty
$0.00
This class BC carbon dioxide fire extinguisher has a UL rating of 5B. It has a capacity of 5 lb. The aluminum construction is built for longevity. Bracket is included. The all metal valve is built for reliability.
$0.00
Built for durability, this extinguisher features a dry, Purple K chemical solution and aluminum valve. The fire extinguisher class is BC and the steel cylinder is built for longevity.
$0.00
This highly durable extinguisher features an easy-to-use light to medium duty anodized aluminum valve body and anodized aluminum handle and lever. It's built for longevity with durable high gloss polyester powder paint and an all- metal valve construction. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator. Equipped with Bilingual Labels.
Products advertised for marketing purposes on this site may contain chemicals known to the State of California to cause cancer or reproductive harm. See –