Toll-Free: 866.936.3890
Filters
Body Armor, Tactical Nylon & Gear
$0.00
- Innovative design provides extended protection to the ulna, forearm, elbow and triceps region.
- Designed for delivering forearms & elbows during CQC, crowd penetration or ground & pound.
$0.00
London Bridge Trading (LBT) - HIGH GEAR™ BATON KIT
$0.00
- Modular ammunition pouch for both 7.62mm and 5.56mm rounds.(Standard with LBT-101 series Assault Packs)
- Designed for quick deployment of ammunition
- Dual zippers with safety snap and quick release pull tabs for ammo safety
- Inner dividers for either 200 rounds of 7.62MM or 5.56MM linked rounds.
- Modular webbing attachment points.
- Constructed from two layers of 1,000 Denier Cordura® with a core of HDPE to provide security and quietness.
- Weight: 1.5 lbs
- Size: 10.5'L x 6.5'W x 2.5'H
- Color: Black, Coyote Tan, Coyote Brown, MultiCam®
$0.00
- Includes a tactical pouch (LBT-9022B-T) featuring two separate mounting capabilities to fit the modular platform and belt mount
- Overall dimensions: 7' L x 2.5' W x 4.5' H
- Weight: .65 lbs.
- Capacity: 80 cubic inches
$0.00
- Magazine pouch for M16/M4 Carbine
- Fits most inside pouch of plate carriers and chest rigs, specific for LBT-6094A
- Choose between three and six magazines
- Magazines are secured in place by bungee retention quick pull tabs for ease of access
- Overall dimensions: 5 1/2' L x 8' H
- Weight: 0.15 lbs.
$0.00
- 4 M16/M4 magazine pockets with hook and loop closure
- 2 radio pockets with 3/4' webbing and side release adjustable closure
- 2 pockets for night vision goggles/batteries located in front of radio pockets (flap with hook and loop closure)
- Additional utility/fragmentation grenade pockets on the outside of night vision goggles/battery pockets (webbing with side release adjustable closure)
- Interior pocket with elastic loops and hook and loop closure for storage of maps or spare magazines Includes removable holster
- Padded, adjustable shoulder straps with side release for attachment of backpack (not included)
- Rear horizontal shoulder strap with adjustable hook and loop
- Elastic and hook and loop closure on shoulder straps guide antenna wire/ hydration bladder hose
- Adjustable waist strap with webbing and side release at each side
- Overall Dimensions: One size fits most.
- Main components:
23L x 7W x 4.5H
Weight: 2.8 lbs
1000 denier DuPont™ Cordura® MIL-SPEC nylon webbing - Type 'E' Thread (VT 295 nylon, bonded), double stitched and bar-tacked at stress points
- Color: ABU, Olive Drab, Coyote Tan, MultiCam®, Black, Universal Camo,
- Coyote Brown, Coyote Tan
$0.00
Warfighters asked and LBT delivered! This entire kit is made using 500 denier Cordura® to cut the weight in half*. Warfighters will be able to quickly reconfigure their kit to accommodate any mission set. LBT delivers 18 new products that units can issue as a kit to new members. A total of 26 pieces come in the kit, delivering the latest in weight reduction and personal customization for the Warfighter.
- Majority of pouches are well below .25 lbs each
- Color: MultiCam®, Coyote Tan, Coyote Brown, Universal Camo
$0.00
- Authorized for use in accordance with ALSAFE 003/02 (COMNAVSAFECEN 102000Z JAN 02)
- Simple and quick to put on, comfortable, and lightweight (3 kg) - one size fits all.
- Front-entry adjustments (3) using 1' nylon web and side-release buckles.
- Side, shoulder, and crotch adjustments.
- Standard sized pockets for magazines (2/M16-3 or 2/M14-2), compass, ect.
- Radio pouch (horizontal on upper back) for Motorola MX300/350 or similar sized radio.
- Hardware and closed cell foam is UL or USCG approved.
- All pockets feature eyelet-reinforced drain holes.
- Robust drag handle on back behind neck.
- Pouch (vertical on back) for hydration bladder.
- Currently in use by:
U.S. Navy Fleet Force Protection teams.
Naval Special Warfare units, including Special Boat and SEAL Delivery.
Naval Harbor Defense units.
U.S. Coast Guard law enforcement teams and port security units.
$0.00
Revolutionary system created to significantly reduce back strain and fatigue.
- Created after 2.5 years of research and development, testing and evaluation.
- Combat tested in theater.
- Redistributes weight to waist and hips reducing fatigue.
- Perfect for long-periods of time, in a vehicle, standing or marching.
- Made of a transparent, UV-stabilized, Polycarbonate plastic for durability
- Weight: 2.5 lbs.
- Can be retrofitted with older models.
- Armor not included.
- Designed for LBT-6094 series only.
- Size: Short (up to 67''), Regular (67'' to 71''), Long (71'' to 75'')
$0.00
- Includes:
- 4 Medium MCR Ready High Gear Suits (5205KIT)
- 2 Large MCR Ready High Geat Suits (5305KIT)
- 4 M4 Training Guns (5920A)
- 4 9mm Training Guns (5910A)
- 4 Training Knives (5930A)
- 18 Pairs of Punching Mitts (5810A/5815A)
- 18 Pairs of Training Gloves (5820A/5825A)
- 8 Groin Protectors (4 each 5830A (Medium) (4 each 5830B (Large))
- 8 Head Protectors (4 each 5840A (Medium) (4 each 5840B (Large))
- 18 Body Shields (5850A)
- 18 Pairs of Thai Pads (5860A)
- 10 Loadout Training Bags (0158B)
- Made in the USA
- Lifetime Warranty
- Berry Compliant
$0.00
This vest is on the Navy AEL approved list. The design works off the density of removable foam inserts that are non-pneumatic, so they float the end user face up to prevent loss of life if knocked unconscious. Design is based around the Navy tested and approved Poly Plates that are neutrally buoyant. LBT-2564A Vest, Naval, Boarding, Ballistic, Flotation, NCB Adult, Type V Special Use UL and Coast Guard Compliant.
KIT INCLUDES
KIT INCLUDES
- Magazine pouch
- Weapon sling
- Belt pouch, NCB
- Belt weapon stow
- Strobe pouch
- Pistol mag pouch
- UL/Coast Guard Approved
- Buoyancy: 17.5 pounds
- Fits chest sizes 32-52 inches
- Ballistic Level NIJ III
- Mesh inside for cooling and water drainage
- All pocket drain hole configurations are UL approved
- Overall weight of vest: 3.8 lbs without plates
$0.00
- Two Seamless side pockets for stowage of Leg Harness system
- Padded Sleeve compartment for stowage of ESAPI/XSAPI during Airborne operations
- Heavy duty external storage straps for securing Mortar Base plate or additional gear
- ASIP Radio pouch located in Main Pack with dual antenna ports for operator convenience
- The internal frame allows 62% of the pack's weight to be transferred to the hips via the tactical padded waist belt
- The two ''load leveling'' straps on the suspenders allow for changing the angle of the pack, which allows different muscle groups to support the load
- Double zipper sliders are used throughout the pack and allow the use of a second slider if one is broken
- Dimensions:
- Medium Side Pocket (2): 10L x 2.25W x 8H
- Overall Dimensions: 14L x 12W x 23H
- 4224 CU
$0.00
Tactical harness made specifically for canines in the 75-85 pound range.
- Made from Heavy Duty Mesh, 1000D Cordura® spine, and lycra side to accommodate proper fit
- Harness clicks in/adjusts through (3) Cobra buckles and #10 YKK zipper
- Elastic Binding around shoulder and back for maximum comfort
- (6) Retention loops to click and carry gear
- (2) Reinforced handles front/back for ease of lifting and holding.
- Rappel strap
- Loops to hold strobes and lights
- 1.25'D ring for lead attachment
- (2) 3.5' x 4' Loop for ID and patch placement
$0.00
- Only machine that dries and sanitizes simultaneously.
- UV Ozone generation provides consistent ozone levels, even with damp gear.
- LCD touch screen with Variable Cycle Times (10 to 60 minutes) and data display. View machine use statistics instantly.
- Password authentication enables authorization codes for machine operation.
- Proprietary ozone destruction technology enables optimum ozone levels and greatest bacteria kill rates.
- No installation required. No tanks to fill or empty. No vents or drains.
- Exterior: 48' width x 34' depth x 64' height.
- Interior: 47.5' x 29' x 46.5'.
- Fits through standard 32' door.
- Weight: Approx. 500 lbs.
- 4' industrial grade casters.
- Sanitizing capacity:
- 33 cubic feet (60% greater than nearest competitor.)
- 32-35 tactical helmets, 21-24 tactical vests.
- Processing capacity: 96-128 helmets/hour, 42-63 vests/hour.
- Capacity will vary based on size of equipment.
$0.00
- Reinforced carrying handles
- Paddled backpack straps and waist strap
- Optional straps at top for body armor or a load bearing vest
- Modular panel with concealed pocket underneath
- Four removable zippered mesh pouches
- Two small mesh pockets
- Large mesh pocket on back
- Dual accessible bottom pocket for IV solutions
- Quick ID zipper pulls in red para-cord
- Exterior MOLLE attachment points on all sides
- 3"x2" loop identifiers on exterior
$0.00
ADAPTIV gear allows the end user to train at real speeds in a multitude of environments. Its injury-prevention/impact-reduction system enhances training performance by allowing operators to realistically practice proper detainee handling, shoot/don't shoot drills with approved marking cartridges, and other close-quarters combat skills. Since military and law enforcement are encouraged to use less-than-lethal force whenever possible, this kind of training is more necessary than ever. That's why we developed the most advanced, made in America fight suit on the market.
The ADAPTIV kit includes all components needed to support any combative program. The Kit can be customized to individual customer needs. ItÕs the only Berry Compliant Fight Gear on the market.- ADAPTIV Helmet
- Elbow /Ulna Pads
- Combat Gloves
- Padded Shorts
- Torso Protector
- Throat Guard
- Boxing Gloves
- Knee/Shin Pads
$0.00
As the only Berry Compliant Riot Suit available on the market, LBTÕs Riot Suit is constructed of a specialized material that makes the suit stab and slash proof, as well as fire retardant. The helmet design can be integrated to fit with a gas mask.
DOWNLOAD SPEC SHEET È
DOWNLOAD SPEC SHEET È
$0.00
The Large Wheeled Load Out Bag includes a fully-welded and durable aluminum frame.
FEATURES
- Removable Padding to Hold Shape
- Expandable Pocket Along Length of Bag and Two Smaller Pockets On Opposite Side
- Document Window on Top of Bag Measuring 9" x 12"
- Document Window on Carry Handle End Measuring 8.5" x 5"
- Padded Carrying Handle for Comfort
- Includes Locking (TSA Approved) Dual Zippered Main Compartment with Para Cord Pull Tabs
- 2" x 8" Loop for Identification Patches
- Seven Interior Mesh Pockets
- Two Padded Dividers, One with Zipper to Hold a Laptop or Sensitive Items
- Extra Heavy Duty Compression Straps for Content Security
- Robust Replaceable Wheel Design Vs the Standard Riveted Wheel Design
- Overall Dimensions: 39"L x 13"W x 10"H
- Weight: 16.1 lbs
$0.00
The beltÕs low-profile design is available with a stiff or padded inner beltÑa security forces favorite.
FEATURES
FEATURES
- Cobra Buckley w/ Flat D-Ring
- Load Bearing Belt with Modular Attachment Points on the Outside
- Hook-and-Loop Closure on the Inner Belt
- Belt Measurements (width) - Inner Belt – 2", Outer Belt – 1.75"
$0.00
This kit is an exact match to the NSN version, but it can be delivered in four to six weeks when procured commercially through TLS. The Rifleman Kit is backed by LBTÕs Lifetime Warranty, which includes repairs and replacements if damaged in the field.
Can be customized to specific end user requirements. DOWNLOAD SPEC SHEET È
Can be customized to specific end user requirements. DOWNLOAD SPEC SHEET È
$0.00
Available in SAPI or MBAV Cut, the Strandhögg™ gets its name from an Old Norse Viking term for a lightning raid. Strandhögg™ was one of the first formalized battle tactics to use covert infiltrators in advance of an actual raiding operation. Strandhögg™ was a tactical game changer in its time, just like the technological advances FirstSpear® is bringing forward in this line of plate carriers.
A full-featured armor platform, The Strandhögg™ can be worn with or without a soft armor panel, depending upon ballistic requirements, threat conditions and the type of plate utilized. Maximizing the ultra lightweight 6/12™ platform and rapid closure systems provided by The Tubes®, the MBAV and SAPI Cut Strandhögg can be rapidly donned or doffed and capable of accepting the integrated inflatable floatation cummerbund from the Maritime 6/12™ Plate Carrier System. Using a streamlined fit throughout, along with state of the art materials and production technology, the Strandhögg™ Plate Carrier is easily tailored for comfort, ventilation and fit.
A full-featured armor platform, The Strandhögg™ can be worn with or without a soft armor panel, depending upon ballistic requirements, threat conditions and the type of plate utilized. Maximizing the ultra lightweight 6/12™ platform and rapid closure systems provided by The Tubes®, the MBAV and SAPI Cut Strandhögg can be rapidly donned or doffed and capable of accepting the integrated inflatable floatation cummerbund from the Maritime 6/12™ Plate Carrier System. Using a streamlined fit throughout, along with state of the art materials and production technology, the Strandhögg™ Plate Carrier is easily tailored for comfort, ventilation and fit.
$0.00
Purpose built for amphibious-user roles, the Amphibian™ supports survival and tactical requirements in riverine, coastal, and open water operations. The Amphibian™ integrates a manually inflatable flotation cummerbund offering up to 80 lbs of lift at the surface in sea water and up to 45 lbs of lift at 33' in sea water. Orally inflated Buoyancy compensators offer 5 lbs. of lift in the front and 5 lbs. in the back. The ultra lightweight 6/12™ platform has been incorporated to keep weight to an absolute minimum and rapid release Tubes® technology allows the entire system to be doffed in seconds during an emergency. Kit includes 2'' Belly Band and Land Cummerbund.
$0.00
FirstSpear® has pioneered a unique and effective way to identify key and specific personnel under passive and thermal night vision systems. A FirstSpear patented process utilizing the latest reflective glow tapes and precision cutting and bonding processes, this item will relay a call sign, identifier, Flag or other information on the exterior of the User's clothing or equipment. This capability can be tailored to include overt illumination glow tape, passive NIR or thermal or a combination of both glow and IR.
$0.00
After collecting and analyzing 3 years of valuable feedback from FirstSpear professional users about the popular Siege-R, FirstSpear® is proud to release the NEW Siege-R Optimized. The standard shoulder pads are now padded and fully adjustable, including two sets of Tubes in the front and back for rapid switch-out to the enhanced M.A.S.S. Armor System. The front and back plate pockets are now internal to the vest, making the system slimmer and better suited for confined spaces. The internal bellyband is now removable for those who do not wish to use it during each mission, and the exterior cummerbund is now enhanced in the back with the new FS High Performance Elastic Webbing, now a standard in all of our new armor carriers.
Products advertised for marketing purposes on this site may contain chemicals known to the State of California to cause cancer or reproductive harm. See –