The Single Vessel Oxygen Storage System (SVOSS) is a large volume mobile compressed oxygen workstation. Developed for various operational applications, including medical operations, high-altitude jump operations, and exothermic breaching operations.

The SVOSS provides up to 339 CF (@ 3000 psi) of compressed oxygen, giving a team requiring a very large, but portable reservoir of compressed oxygen a sizable advantage in almost any situation

SPECIFICATIONS

• Single 1910 cu in aluminum lined carbon fiber cylinder
  
• CGA540 Inlet fill port with isolation on/off valve
  
• Cylinder and outlet pressure gauge
  
• Adjustable regulator for output adjustment
  
• Three (3) QD outlets for connecting multiple LP O2 hoses
  
• Removable and stowable wheels for system stacking and mobility when needed
  
• Built in mounting system for connecting multiple SVOSS systems together
  
• Dimensions: 56.5" H x 12" D x 12" W
  
• Weight: 92 lbs empty/103 lbs filled @3000 psi
  
• Capacity: 9.584 L @3000 psi (339 cubic feet)
  
  

The SETS™ Responder system allows first responders to use existing medical cylinders for exothermic cutting during rescue operations. The system gives the first responder the ability to burn through metal, locks, and hinges with ease.

The SETS™ Responder was designed for use in conjunction with medical oxygen cylinders with a CGA870 post valve connection.

SPECIFICATIONS

• Can be used with existing medical oxygen cylinders (post style)
  
• CGA870 regulator connection
  
• Quick connect/disconnect rod cutting control handle
  
• 9V battery rod ignition
  
• Compact nylon carry case
  
• Dimensions (with medical "D" cylinder): 22" L x 9.5" W x 5.5" H
  
• Weight (with medical "D" cylinder): 13.5 lbs.
  
• Cutting capability: (3) 18" SETS Exothermic Rods @ 2000 psi (O2)
  
  

The NeX-Ray® product line offers advanced, portable, lightweight x-ray image capture units designed to obtain accurate, near real-time radiographic imaging. Patented technology allows NeX-Ray® to dispense with the use of fragile and heavy glass plates integral to most flat panel imagers. The NeX-Ray® product line consists of eight products in two categories: - The FPX (Flat Panel X-ray) models - The MMX (Multi Mission X-Ray) models The FPX products are lightweight flat panel x-ray detectors with imaging areas ranging from 14"x34" down to 4"x7", with weights ranging from 12 lbs to as little as 1.5 lbs. MMX products incorporate removable imaging plates that allow additional flexibility for operators in the field. The x-ray image can be captured with the imaging panel inside the unit (flat panel mode) or with the imaging panel outside the unit and then inserted into the unit for scanning (scanner mode). Two MMX sizes are available: 14"x17" and 8"x14". Both product lines can be operated with Windows XP, 7, or 8 laptops or with Android 4.0 (or later) mobile devices. NeX-Ray® imagers can be operated in stand-alone, tethered remote, and wireless modes.

The MINI Z® handheld Z Backscatter® scanning system is ideal for on-the-go inspection of a wide variety of targets, such as car doors and fenders; tires; furniture; and the interiors of boats, vehicles and aircraft. The MINI Z system provides real-time detection of organic threats such as drugs and explosives. The Enhanced Detection Panel option enables transmission imaging to detect metallic threats such and guns and knives.

Our Trailer-mounted inspection systems are fully self-contained to deliver fast, efficient cargo screening for hidden weapons, explosives, and drugs. The multi-technology Eagle® T60 ZBx combines transmission and Z Backscatter® imaging for maximum screening capabilities, while the Eagle T25 offers cargo and vehicle inspection in a smaller operational footprint.

The MINI Z® system is the world's most powerful Z Backscatter® imaging system, highlighting organic threats and contraband and providing unsurpassed operational flexibility. With its small form factor and single-sided imaging, the MINI Z system can scan a wide variety of targets, such as car doors and fenders; tires; furniture; packages; and the interiors of boats, vehicles and aircraft. The MINI Z system is completely self-contained, with no required set-up and no consumables to replenish. Simply power on the device and you're ready to scan. The MINI Z system is inherently low dose and features reliable and redundant safety subsystems.

• Portable Z Backscatter imaging system
• Easy to use
• Safe for operators, bystanders and the environment

The world's first handheld Z Backscatter® imaging system provides fast, portable, real-time imaging to detect drugs, contraband, and explosives in hard-to-reach locations. We took the same technology that made the ZBV® system the top-selling cargo and vehicle inspection system in the world, and miniaturized it. The MINI Z system provides effective detection of organic threats, contraband, and explosives for public safety, customs and border enforcement, and security officials. The MINI Z system is a compact, single-sided imager that scans objects in hard-to-reach areas, giving better visibility into furniture, boats, aircraft, vehicles, and more. The MINI Z system is completely self-contained, with no required set-up. Simply power on the device and you're ready to scan.

HDT Command and Control solutions provide flexibility, durability and reliability for those who need to establish operations in the field and adapt to changing mission requirements. Comprised of lightweight components designed with mobility, human capital and logistics in mind, our display systems, command tables, video distribution solutions, audio systems, tactical furniture, lighting, flooring and cable management solutions allow users to focus on the mission, not on the infrastructure.

In the field, power isn't about electricity. It's the knowledge that you can run a radar array, maintain command and control operations or perform surgery on a patient in need. With a full line of generators, power distribution products and other mobile power solutions, HDT's fuel-flexible generator trailers and generator ECU trailers (GETs) are used by every branch of the U.S. military for dependable, reliable and energy-efficient power. In fact, over 20,000 HDT trailers have been put into service since 2006. Our Intelligent Power Technology (IPT) smart system connects multiple generators to form a networked power microgrid that offers load sharing and balancing, and automates the power distribution at operating base camps. Our HDT Trailer Mounted Support System (TMSS) Medium and Large trailers are part of the Standard Integrated Command Post System (SICPS).

HDT's MTH150 is one of the safest and most reliable sources for powered outdoor heat. The heater uses 110 volt power and burns all grades of diesel fuels including the military's JP8. The MTH150 has a powerful fan system delivering 120,000 BTU (35.17 kW) of clean, heated outside air to your tent or duct system. The unit operates with fuel supplied from its integral, fuel tank or from a remote fuel supply. With air ducts attached the heater can run in a 100% recirculation mode, or, a fresh air collar allows for 300 CFM of make-up air. Standard accessories include a parts/maintenance manual, remote thermostat, two 16' x 10' non-CBRN ducts, stack extension and power cord and all but the ducts can be stored onboard.

The HDT Base-X® Model 307 provides an interior clear span of 18' wide by 35' long with 8 entry and egress points. This shelter will house between 14-18 personnel. It is also ideal for brigade and regiment size command and control (C2), medical, communication, and logistics operations.

• Clear interior span of 18' x 35'
• 8 entry and egress points
• Electrical outlet every 5'
• Hang points every 5' bear 100-pound weight-load each
• Integral liner with floor and HVAC plenum
• Houses 14 to 18 personnel
• Low weight, cube and personnel requirements
• Easy field maintenance
• Energy efficient
• Superior strength and durability

The HDT Base-X® Model 8D36 is a large dome shaped shelter with a clear span of 31' with 8 entry and egress points. This shelter can be set up and taken down without the use of tools, ladders, or mechanical assistance. This shelter is ideal for Division and Corps level Command and Control (C2), Tactical Operations Center (TOC), and maintenance.

• Clear interior span of 31' x 37'
• 8 entry and egress points
• Electrical outlet every 5'
• Hang points every 5' bear 100-pound weight-load each
• Integral liner with floor and HVAC plenum
• Tactical Operations Center (TOC), Command and Control (C2), maintenance
• Low weight, cube and personnel requirements
• Easy field maintenance
• Energy efficient
• Superior strength and durability

HDTÍs Generator Support Trailers are integrated support systems that provide mobility, power and/or environmental control to HDT shelter systems. Conforming to safe to transport criteria established by the Military Transport Management Command (MTMC), the trailers are suitable for secondary and unimproved roads and sealift transportability. Many are also certified for air transport aboard select military aircraft.

HDTÍs Base-X® folding frame shelters are durable, lightweight and deploy in 10 minutes or less. They range in size from personal tents to Corps-level complexes. Base-X shelters support base camp, Command and Control (C2), aircraft and vehicle maintenance, medical, chemical/biological decontamination and industrial applications.

The Olympic Folding Building is a unique productcombining the robustness of permanentconstruction with rapid speed of deployment andtrue relocatability of a temporary structure.

FEATURES:

• Clear spans from 30 feet to 110 feet
• Export: 7' 6" panel width; ISO container packaging
• Domestic: 10' panel width
• Rapidly deployable, durable, fully recoverable andre-deployable design
• Robust wind, snow and seismic ratings for global deploymentInsulated metal panel construction for excellent thermal performance in all environments

FEATURES:

• MRO or MWR - Hangars, DFAC's, Warehousing, Logistics staging, Shade Shelters, Maintenance shops, Shade Shelters, and more
• Temporary, Semi-Permanent, and Enduring Solutions available
• Six frame options to meet most military in-field, deployed and garrison requirements
• Most models are deployable and installed with minimal site preparation and equipment
• Worldwide installation services or self-installed

WHY BRFB:

• Often no permanent facility or site alterations required
• Unlimited utility - the system is re-deployable and re-configurable.
• Can be classified as equipment, not real property
• Multiple anchoring systems from concrete ballast blocks to earth anchors, and connex box mounting
• Structures rated for applicable UFC load requirements
• Verified procurement through DLA SOE Tents Contract
• Professionally-engineered to meet or exceed all building codes and withstand the most demanding environments for permanent, semi-permanent, and temporary applications
• Worldwide delivery and installation with the most aggressive timelines in the industry

FEATURES:

• Use existing conex boxes for more than just storage
• Fully enclosed to create a structure or add just a roof for shade and weather canopy
• Single to multiple levels of sea cans can offer higher peak heights
• Conex boxes provide for secure perimeter storage or offices
• Saves on-site prep and anchoring
• Suitable for challenging soil conditions.
• Deployable and Relocatable

WHY BRFB:

• Often no permanent facility or site alterations required
• Unlimited utility - the system is re-deployable and re-configurable.
• Can be classified as equipment, not real property
• Multiple anchoring systems from concrete ballast blocks to earth anchors, and connex box mounting
• Structures rated for applicable UFC load requirements
• Verified procurement through DLA SOE Tents Contract
• Professionally-engineered to meet or exceed all building codes and withstand the most demanding environments for permanent, semi-permanent, and temporary applications
• Worldwide delivery and installation with the most aggressive timelines in the industry

The Alaska 4-Way Hub™ from Alaska Defense® enables multiple shelter systems to be seamlessly combined, creating a single, larger, and highly adaptable structure. This versatile connector expands the operational footprint of deployed forces, supporting applications such as tactical operations centers (TOCs), mobile field hospitals, billeting shelters, and dining facilities (DFACs).

The Alaska 4-Way Hub™ is designed to work with any 20' wide military shelter from Alaska Defense®, including the Alaska XP® Shelter System and the Alaska 20' Shelter System™. Its configuration allows layouts to be strategically assembled, expanded, or restructured in the field to meet evolving mission requirements.

Each Alaska 4-Way Hub™ includes LED lights, a spares kit, and a shipping container. Built for demanding environments, it provides a reliable, scalable solution for establishing flexible expeditionary infrastructure that supports sustained operations.