Toll-Free: 866.936.3890
Filters
$0.00
SLAM D is a tripod-mountable high-power designator that also has a high-power NIR pointer with pulse feature, see-spot observation device with laser spot tracking and PRF code counting, and a handheld laser acquisition marker. Users can now carry, and rapidly utilize a multi-role laser device for all close air support situations, regardless of range to target. SLAM D fills the role of multiple battlefield devices, providing enhanced situational awareness in a single device that is over 30% smaller and lighter than other "designator only" devices in use today.
$0.00
With over 95 years of live fire range experience, InVeris Training Systems is an expert in ballistic containment. The patented GranTrapTM rubber bullet trap uses granulate rubber material to stop incoming rounds. The bullet impacts the soft media and is captured predominately intact, minimizing airborne lead dust, averting backsplatter and ricochet, and minimizing impact noise. InVeris also developed the first US commercial steel bullet trap and venetian blind traps. The LE5000 steel trap series provides a low cost, low maintenance solution for indoor and outdoor ranges using fixed firing lines. The design of the impact plates directs bullets into a swirl chamber at the top of the trap for final deceleration. The spent fragments collect in trays for easy cleaning of the bullet trap.
$0.00
InVeris Training Systems is a global leader in military field range equipment, including static and dynamic infantry and armor targets. With more than 80,000 target systems successfully fielded throughout the world, InVeris's target designs are factory configured to support the communication method and power requirements specified for each range. Lightweight and portable, Stationary Infantry and Armor Targets (SIT/SAT) are easily transported and stacked for deployment or storage. Our deployable targets can be installed on unimproved terrain, in a matter of minutes, with no special equipment required. Lifters performs all standard target commands such as expose, conceal, hit-fall, hit-hold and hit-bob, and can be easily programmed for any combination of commands in scenario mode without affecting the default settings.
$0.00
The New SRCE Augmented Reality Trainer. Developed for today's highly mobile military, security and law enforcement entities, InVeris Training Solutions' SRCE enables operators and trainees to see, rehearse and collectively experience future missions at the objective location or virtually with a new level of realism and performance assessment to aid in perfecting critical engagement techniques.
- SRCE is highly scalable and portable making it ideal for training as well as mission rehearsals in various locations.
- Unrivaled After-Action Review (AAR) capabilities with quick reset of scenarios enable more training sessions with a greater throughput of operators.
- See yourself and your team in a live virtual replay as you moved through the objective.
- Use Analytics to track your position, weapon, eye focus, shots, shot trajectory, accuracy % and times for each trainee.
$0.00
InVeris Training Solutions' VR-DT "Verdict" is an advanced training solution that uses virtual reality (VR) for critical, real world preparation for de-escalation and use of force situations.
Includes Law Enforcement Software for today's de-escalation training.
The new Military Security Software gives Military Police the advantage to train in a realistic, simulated base environment, complete with civilian and fellow service member avatars.
Includes Law Enforcement Software for today's de-escalation training.
The new Military Security Software gives Military Police the advantage to train in a realistic, simulated base environment, complete with civilian and fellow service member avatars.
- You can customize and build your own scenarios.
- Custom location (street, hospital, school, gas station)
- Customize bystanders and suspects
- Customize actions, props and weapons
- PTT-Push to talk allows the instructor to take over the voice of the suspect thus provide the most realistic verbal engagement training.
- Choose from VR pistol, taser, OC spray, rifles and shotguns etc.
$0.00
- Designed for all . 223 cal. /5. 56mm rifles.
- 8' and 30' Memory-Flex® Cables for effective and correct Breech-to-Muzzle® cleaning
- Two (2) bronze bore brushes and Mongoose® G2 brushes remove copper deposits and other fouling
- B. O. N. E. ® Tool cleans bolt carrier assembly effectively
- Solvent/cleaner helps clean, lubricate and protect in one efficient step
- Includes gun cloth
$0.00
This cleaning system is specifically designed to clean and maintain the C7, M16, M249 SAW, M4, Mod 46, and all other 5. 56mm weapon systems. Flexible cleaning rods and swabs quickly clean the receiver, chamber, neck and bore, while obstruction removers knock out bore obstructions and stuck cases. Special scraper and pick for the bolt face, slide and locking lugs, all purpose brushes and comprehensive instruction booklet help to maintain flawless performance in mission critical situations. Complete optics cleaning components, and MOLLE belt attachment also included.
$0.00
Every armorer knows the importance of having the right tools for the job, whether in the field or back in garrison. They also understand the value of having all those tools in one complete and portable weapons maintenance system. Specifically designed for all 5.56MM, 7.62MM, 9MM, 40MM, .40 cal., .45 cal., .50 cal., and 12 gauge weapons.
- 8 ¾?, 20 ¾? and 30¾? Memory-Flex® Cables for effective and correct Breech-to-Muzzle® cleaning
- Bronze bore brushes remove deposits and other fouling
- Obstruction removal tools for jammed cases and other blockages
- Specialized precision tools for complete breakdown and fine cleaning of all critical and hard to reach areas of your weapon
- Includes optics cleaning gear
- Includes removable Deluxe Military Cleaning System (item# MFG-85211-5)
$0.00
With its 10x magnification you get more power and more performance without sacrificing weight or adding extra bulk to your field gear. The ergonomic eyecups block sun and wind and the ClicLoc strap connection makes them even more functional and versatile. A Fast Focus center wheel makes it easy to keep your target in focus, even in fast moving situations.
$0.00
MADE IN USA: Extruded aluminum top, side and end trim. Aluminum tube, H Style Square Legs 1.25", welded with hinge and locking device. Powder coat gray top and black legs. Folding, Indoor/Outdoor.
$0.00
MADE IN USA: 1.5" Aluminum frame, Mesh fabric, 2" securing straps with buckle, Spreader bar and Stirrup assembly. Powder coat black
$0.00
The Bambi Bucket brand has become synonymous with aerial firefighting. This strong but lightweight, flexible firefighting bucket was the first fully-collapsible aerial firefighting bucket.
FEATURES:
FEATURES:
- Cost-effective water delivery
- Easy to maintain
- Portable convenience
- Fully collapsible
- High-flow dump valve
- Designed for maximum durability and strength
$0.00
The Torrentula® is a heavy-duty model for heavy-lifthelicopters and provides multiple drops and loadshedding.
FEATURES:
FEATURES:
- Unlimited multiple dumps, variable flow and split drops
- Instant open and close valve actuation on lowpower draw
- Heavy duty bucket for heavy-lift helicopters
- Unlimited multiple water drops (split drops, loadshedding)
- Variable flow rate from 0-100%
$0.00
Step up to the gold standard in 3D printing with genuine SLA. The ProJet 7000 offers the same SLA benefits of the ProJet 6000, with more than double the build volume so you can print even larger parts for prototyping, rapid tooling and end use with fine-feature detail.
FEATURES:
FEATURES:
- Flexible Throughput: With flexible build volume options and easily swappable material delivery modules, print exactly what you need, exactly when you need it.
- Accurate, Precise Detail: Print parts with crisply defined features and precise geometries, so you can evaluate physical models of design concepts in their nearly finished state.
- Exceptional Part Quality: Whether you need the clearest clear, the smoothest surfaces, or the best dimensional stability over your entire part, getting the exceptional part quality of 3D Systems SLA is more economical than ever.
$0.00
The DMP Flex 100 prints exceptionally detailed, high quality parts in an automated and repeatable process that is ideal for R&D and serial part manufacturing at the tightest tolerances in direct metal printing.
FEATURES:
FEATURES:
- Industry's Best Surface Finish: Reduce machining or polishing of final parts.
- Clean and Safe: Sealed powder loading and recycling prevents material contamination and increases operator safety.
- Exceptional Mechanical Properties: Roller compaction yields higher density and uniform mechanicals.
- Unmatched Precision: Print the finest features with exceptional accuracy.
- Integrated Metal Printing: ProX DMP printers, 3DXpert™ software and LaserForm® materials are fine-tuned for process reliability and repeatability.
- Print in Certified Alloys: Count on your results with certified LaserForm materials and extensively tested print parameters.
$0.00
The ProX DMP 300 prints exceptionally detailed, high quality parts in an automated and repeatable process that is ideal for R&D and serial part manufacturing at the tightest tolerances in direct metal printing.
FEATURES:
FEATURES:
- Industry's Best Surface Finish: Reduce machining or polishing of final parts.
- Clean and Safe: Sealed powder loading and recycling prevents material contamination and increases operator safety.
- Exceptional Mechanical Properties: Roller compaction yields higher density and uniform mechanicals.
- Unmatched Precision: Print the finest features with exceptional accuracy.
- Integrated Metal Printing: ProX DMP printers, 3DXpert™ software and LaserForm® materials are fine-tuned for process reliability and repeatability.
- Print in Certified Alloys: Count on your results with certified LaserForm materials and extensively tested print parameters.
$0.00
With its combination of production speed, high throughput and capacity, and excellent part quality, the sPro 140, produces robust 3D printed end-use parts up to 550 mm length or large amounts of parts, nested in the full 22 x 22 x 18 in (550 x 550 x 460 mm) build volume. This SLS (Selective Laser Sintering) 3D printer produces durable parts for a multitude of applications such as housings, machinery components, complex end-use parts such as ducting, functional test parts and assemblies, as well as healthcare products and tools.
FEATURES:
FEATURES:
- Tough and Durable Parts: Industrial-grade performance delivers the toughest applications, print after print.
- Excellent Part Resolution, Surface Finish and Edge Definition: Print small to large parts with fine detail and sharp edges.
- Flexibility Through Upgrade Options: Upgradeable with the flexibility to increase speed and resolution to match your needs now and in the future.
- Open Material Architecture: Broad choice of materials through flexible print parameters.
$0.00
The DMP Flex and Factory 350, developed from the outcome of nearly half-a-million prints, offers fast build turnaround times in demanding 24/7 production environments. The DMP Flex 350 is upgradeable to DMP Factory 350, which has an integrated material handling system.
FEATURES:
FEATURES:
- Integrated Metal Printing: DMP printers, 3DXpert™ software and LaserForm® materials are fine-tuned for process reliability and repeatability.
- Stronger Mechanical Properties: The lowest O2 during builds (<25 ppm) for exceptionally strong parts of high chemical purity.
- Extensively Tested Materials: Thousands of hours of parameter optimization ensure predictable and repeatable print quality with a broad range of LaserForm materials.
- Low Total Cost of Ownership: Shared ancillary equipment maximizes printer throughput and efficient consumables management reduces operating cost.
- High Quality Powder Management: DMP Factory 350 comes with integrated powder management. An in-unit viewing panel enables visual inspection of the ultrasonic sieve to ensure incident-free operation.
$0.00
Double your storage capacity within the same floor space with an Equipto Pallet Rack Mobile Storage System. Design allows for future reconfiguration and expansion, motorized movement, and synchronized control between units.
- Fully motorized operation including safety sensors
- Capacity up to 75,000 lbs. per row
$0.00
A mechanical-assist high density mobile aisle storage system is designed to store items of all shapes, sizes and weight with shelving, drawers and bulk rack.
- Mobile carriages are rated to carry a maximum of 1000 lbs. per linear foot.
- Mechanical-assist controls enable operator to move 10,000 lbs. with minimal effort.
- Avoid the cost of new construction by doubling storage capacity in the same footprint.
- Integration with V-Grip maximizes flexibility to store small and bulk items together.
$0.00
Maximize storage space with Equipto's mobile aisle system specifically designed for flight equipment uses, including our specific hanger for Flight Crew survival vests.
• Mobile aisle storage system saves 50 percent over traditional shelving
• Versatile configurations – including high capacity drawers and shelves, cabinets, dividers, and flight equipment hangers to minimize inventory and accountability.
• Prior military flight crew employees to create the perfect design to meet your needs!
• Mobile aisle storage system saves 50 percent over traditional shelving
• Versatile configurations – including high capacity drawers and shelves, cabinets, dividers, and flight equipment hangers to minimize inventory and accountability.
• Prior military flight crew employees to create the perfect design to meet your needs!
$0.00
The Tray Ration Heater (TRH) used in the Tray Ration Heating System, and powered by the clean-burning Babington Airtronic Burner, defines the flagship of the Babington line of field feeding equipment.For 20 years the TRHS continues to be the backbone of the Army, Marine Corps and Air Force's rapid deployment field feeding programs. A fully mobile and HMMWV compatible system, with heat-on-the-move capability, the TRHS revolutionized military feeding by virtually eliminating long train subsistence logistics. The TRHS supports 250 people per hour and served more than 150 million meals worldwide throughout combat, disaster relief, peacekeeping and training operations.
FEATURES:
FEATURES:
- Only DoD approved heating system on the move
- Each tray pack contains either 9 or 18 portions of entrée, starch, vegetable or dessert item.
- Holds up to 24 Tray Packs or any combination of tray packs and #10 cans.
- Ratchet Straps:
- 5-foot, 3 each
- 14-foot, 1 each
- 16-foot, 1 each
$0.00
The latest in field-feeding innovation – the closed combustion Containerized Kitchen Enhanced (CK-E) that completely eliminates carbon monoxide exposure, dramatically reduces interior heat and fuel consumption to improve Warfighter safety and meet operational energy requirements. For over 25 years, Babington has been providing heat-on-the-move food service equipment that meets and exceeds the U.S. Military's mandates for efficiency, reliability and safety. The CK-e MECC enhances the capabilities or previous containerized kitchens with noted improvements.
FEATURES:
FEATURES:
- All appliances are heated by Airtronic burners in closed combustion heat exchangers which eliminates noise and heat contamination while also funneling all combustion exhaust outside the kitchen.
- All appliances are insulated and thermostatically controlled, making them fuel-efficient and safe to use
- Appliances can be removed for small unit support in off-grid deployments
- Modular appliances are stackable and use a storage cabinet base, universal heating module, interchangeable cooktop module and removable exhaust hood
$0.00
Cocoon corrosion preventative warehousing and storage systems integrate environmental controls that put the user in complete control of the real-time information needed to drive successful corrosion prevention programming. The value is in cost savings from reduced inspections, improved productivity, and a reduction in maintenance dollars. Cocoon storage provides the optimal environment for the preservation of equipment and readiness accountability. These systems protect from the following:
- Mould, mildew, and insects
- Softening of cardboard packaging
- Corrosion on metals
- Corrosion on electronics
- Aircraft and vehicle storage
- Warehouses (prepositioned stock, parts, etc.)
- Ordnance and ECMs
- Containers
- Preposition Ships
- Mothballing facilities
- Many configurations and options were available. Contact ADS today for ordering information.
Products advertised for marketing purposes on this site may contain chemicals known to the State of California to cause cancer or reproductive harm. See –